Beacon HG680KA_(HI3798MV300／HI3798MV310)_Free disassembly and short-circuit strong brush (rescue brick)_card firmware package (with tutorial and short-circuit points)
Features:
1. It is suitable for flashing the TV box of the corresponding model;
2. Open the market installation and U disk installation apk shielded by the original firmware;
3. Modify dns, common to all three networks;
4. A large number of built-in useless software has been streamlined, the running speed has been improved, and a large amount of storage space has been added;
5. Remove application installation restrictions;
6. Supports various fancy functions such as self-starting at boot, password lock at boot, child app lock, app hiding, auto-entering HDMI when booting;
1. Steps of dismantling brush machine:
1. Click the remote control setting button to enter the system settings, enter the system information, and click the version information inside for 3-5 times. Then enter the advanced settings in the settings and turn on the adb option inside. Then go to the network settings in the settings to connect to the network with a wireless or wired connection, and write down the IP address.
2. Decompress Fiberhome HG680-KA firmware without disassembly Step 2.rar to the computer desktop, double-click to execute in the running directory, enter the box ip address as required, and restart the computer after execution.
3. Copy update.zip to the root directory of the USB flash drive. The fat32 format is best for the USB flash drive, and the best is under 8g. Insert the USB drive into the box.
4. Click the remote control settings to enter the system upgrade in the settings, and flash this firmware. It will automatically restart after flashing.
2. Strong brush short circuit save brick brush machine
Download the boot file and firmware (attachment at the back of the post), format the U disk below 8G, put the file into the root directory of the U disk as shown in the figure below, and insert it into the USB port of the box.
Short connect R37 and GND, GND can choose the TTL terminal pin, after the short connection is completed, power on and start up, the short connection time must be well controlled within 4 seconds (important) and then loosen the R37 resistance and GND short connection:
3. Boot interface of FiberHome HG680-KA set-top box card
The cause of the stuck boot interface may be caused by incompatible firmware. The solution is as follows:
Short-circuit the reset button terminal. Some set-top boxes cancel the reset button. You need to disassemble the box and enter the internal short-circuit, as shown in the figure below. After short-circuiting, power on and start up. Wait for 10 seconds to release it and it will automatically enter the system. After entering the system, follow the attachment of the post Just re-flash the machine.
4. Turn on the ADB switch
Through the remote control, turn off the power and then turn on the power, keep pressing the menu key + volume down on the remote control, as shown in the figure below, the rec entered by the remote control restores the system default, and then you can open adb, and you can crack it with one key
Flash firmware:
Link: https://pan.baidu.com/s/1v1FfIgNzhZ0VLGCNX3w6YQ
Extraction code: 8888
Alternate link: https://wwt.lanzoux.com/b021zvjkj
Extraction code: 6l1n
Firmware path: A "Dangbei Desktop Pure Perfect Edition-Firmware Encyclopedia" (more firmware types) > 8 "Huawei Firmware Collection" > "HG680-KA" HiSilicon chip
There are also in the B collection
Disclaimer: This Android firmware is only for internal testing and technical exchange. Any legal disputes caused by illegal commercial use and commercial conflicts of interest have nothing to do with me, and I am not responsible for it. Please delete it within 24 hours after downloading. Thank you for your cooperation! Flashing is both fun and risky, please choose carefully, all consequences caused by flashing are at your own risk, and I will not be responsible for it!