1、主配置
Ruijie_1(config)#switch virtual domain 102
Ruijie_1(config-vs-domain)#switch 1
Ruijie_1(config-vs-domain)#switch 1 priority 200 #优先级高的为主
Ruijie_1(config-vs-domain)#switch 1 description Sw1
Ruijie_1(config)#vsl-port
Ruijie_1(config-vsl-port)#port-member interface HundredGigabitEthernet 0/51
Ruijie_1(config-vsl-port)#port-member interface HundredGigabitEthernet 0/52
Ruijie_1#wr #必需先保存配置再转换模式
Ruijie_1#switch convert mode virtual #转换模式后设备自动重启
2、备配置
Ruijie_2(config)#switch virtual domain 102
Ruijie_2(config-vs-domain)#switch 2 priority 100 #不能先配置优先级，需先更改switch ID
% Failed to configure device priority for the reason current configured switch is 1.
Ruijie_2(config-vs-domain)#switch 2
Ruijie_2(config-vs-domain)#switch 2 priority 100
Ruijie_2(config-vs-domain)#switch 2 description Sw2
Ruijie_2(config)#vsl-port
Ruijie_2(config-vsl-port)#port-member interface HundredGigabitEthernet 0/51
Ruijie_2(config-vsl-port)#port-member interface HundredGigabitEthernet 0/52
Ruijie_2#wr #必需先保存配置再转换模式
Ruijie_2#switch convert mode virtual #转换模式后设备自动重启
3、堆叠优化配置，bfd检测、聚合端口检测二选一
Ruijie(config)#switch virtual domain 102
Ruijie(config-vs-domain)#dual-active detection bfd
Ruijie(config-vs-domain)#dual-active bfd interface mgmt 1/0
Ruijie(config-vs-domain)#dual-active detection aggregateport
Ruijie(config-vs-domain)#dual-active interface aggregatePort 1
Ruijie(config-vs-domain)#switch cfg_mode single
Ruijie(config-vs-domain)#dual-active auto-recovery enable
4、堆叠状态检查
Ruijie#show switch virtual config #查看堆叠配置
Ruijie#show switch virtual role
Ruijie(config)#redundancy forceswitch #锐捷主备切换
Ruijie#show switch virtual link
Ruijie#show switch virtual