AR1:
<Huawei>UN T M
Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR1
[AR1]user-i
[AR1]user-interface con 0
[AR1-ui-console0]idle-timeout 0 0
[AR1-ui-console0]qu
[AR1]int g0/0/0
[AR1-GigabitEthernet0/0/0]ip add 10.1.0.1 16
[AR1-GigabitEthernet0/0/0]un shut
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[AR1-GigabitEthernet0/0/0]int loop 0
[AR1-LoopBack0]ip add 1.1.1.1 32
[AR1-LoopBack0]qu
[AR1]ospf 1 router-id 1.1.1.1
[AR1-ospf-1]area 3
[AR1-ospf-1-area-0.0.0.3]network 1.1.1.1 0.0.0.0
[AR1-ospf-1-area-0.0.0.3]net
[AR1-ospf-1-area-0.0.0.3]network 10.1.0.0 0.0.255.255
[AR1-ospf-1-area-0.0.0.3]stub
[AR1-ospf-1-area-0.0.0.3]q
[AR1-ospf-1]q
[AR1]disp ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.1 interface 12.1.1.1(GigabitEthernet0/0/0)'s neighbors
Router ID: 2.2.2.2 Address: 12.1.1.2
State: Full Mode:Nbr is Master Priority: 1
DR: 12.1.1.1 BDR: 12.1.1.2 MTU: 0
Dead timer due in 29 sec
Retrans timer interval: 5
Neighbor is up for 00:12:21
Authentication Sequence: [ 0 ]
[AR1]ping -a 1.1.1.1 6.6.6.6
PING 6.6.6.6: 56 data bytes, press CTRL_C to break
Reply from 6.6.6.6: bytes=56 Sequence=1 ttl=251 time=80 ms
Reply from 6.6.6.6: bytes=56 Sequence=2 ttl=251 time=50 ms
Reply from 6.6.6.6: bytes=56 Sequence=3 ttl=251 time=60 ms
Reply from 6.6.6.6: bytes=56 Sequence=4 ttl=251 time=40 ms
Reply from 6.6.6.6: bytes=56 Sequence=5 ttl=251 time=50 ms
--- 6.6.6.6 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/56/80 ms
[AR1]disp ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 9 Routes : 9
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 OSPF 10 2 D 10.1.0.2 GigabitEthernet
0/0/0
1.1.1.1/32 Direct 0 0 D 127.0.0.1 LoopBack0
10.1.0.0/16 Direct 0 0 D 10.1.0.1 GigabitEthernet
0/0/0
10.1.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.1.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[AR1]
AR2:
<Huawei>un t m
Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR2
[AR2]user-in con 0
[AR2-ui-console0]idle-timeout 0 0
[AR2-ui-console0]q
[AR2]int g0/0/1
[AR2-GigabitEthernet0/0/1]ip add 10.0.0.1 16
[AR2-GigabitEthernet0/0/1]un shut
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[AR2-GigabitEthernet0/0/1]int loop 0
[AR2-LoopBack0]ip add 2.2.2.2 32
[AR2-LoopBack0]int g0/0/0
[AR2-GigabitEthernet0/0/0]ip add 10.1.0.2 16
[AR2-GigabitEthernet0/0/0]un shut
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[AR2-GigabitEthernet0/0/0]q
[AR2]ospf 1 router-id 2.2.2.2
[AR2-ospf-1]area 1
[AR2-ospf-1-area-0.0.0.1]network 2.2.2.2 0.0.0.0
[AR2-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.255.255
[AR2-ospf-1-area-0.0.0.1]area 3
[AR2-ospf-1-area-0.0.0.3]network 10.1.0.0 0.0.255.255
[AR2-ospf-1-area-0.0.0.3]area 1
[AR2-ospf-1-area-0.0.0.1]vlink-peer 3.3.3.3
[AR2-ospf-1-area-0.0.0.1]disp ospf p
OSPF Process 1 with Router ID 2.2.2.2
Neighbors
Area 0.0.0.1 interface 10.0.0.1(GigabitEthernet0/0/1)'s neighbors
Router ID: 3.3.3.3 Address: 10.0.0.2
State: Full Mode:Nbr is Master Priority: 1
DR: 10.0.0.1 BDR: 10.0.0.2 MTU: 0
Dead timer due in 40 sec
Retrans timer interval: 5
Neighbor is up for 00:05:09
Authentication Sequence: [ 0 ]
Neighbors
Area 0.0.0.3 interface 10.1.0.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 1.1.1.1 Address: 10.1.0.1
State: Full Mode:Nbr is Slave Priority: 1
DR: 10.1.0.1 BDR: 10.1.0.2 MTU: 0
Dead timer due in 37 sec
Retrans timer interval: 5
Neighbor is up for 00:04:42
Authentication Sequence: [ 0 ]
[AR2-ospf-1-area-0.0.0.1]q
[AR2-ospf-1]q
[AR2]ospf
[AR2-ospf-1]area 3
[AR2-ospf-1-area-0.0.0.3]stub no-summary
[AR2-ospf-1-area-0.0.0.3]q
[AR2-ospf-1]q
[AR2]disp ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 20 Routes : 20
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.1/32 OSPF 10 1 D 10.1.0.1 GigabitEthernet
0/0/0
2.2.2.2/32 Direct 0 0 D 127.0.0.1 LoopBack0
3.3.3.3/32 OSPF 10 1 D 10.0.0.2 GigabitEthernet
0/0/1
4.4.4.4/32 OSPF 10 2 D 10.0.0.2 GigabitEthernet
0/0/1
5.5.5.5/32 OSPF 10 3 D 10.0.0.2 GigabitEthernet
0/0/1
6.0.0.0/8 O_ASE 150 100 D 10.0.0.2 GigabitEthernet
0/0/1
10.0.0.0/16 Direct 0 0 D 10.0.0.1 GigabitEthernet
0/0/1
10.0.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
10.0.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
10.1.0.0/16 Direct 0 0 D 10.1.0.2 GigabitEthernet
0/0/0
10.1.0.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.1.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.2.0.0/16 OSPF 10 3 D 10.0.0.2 GigabitEthernet
0/0/1
10.56.0.0/16 OSPF 10 2 D 10.0.0.2 GigabitEthernet
0/0/1
100.100.100.100/32 OSPF 10 1 D 10.0.0.2 GigabitEthernet
0/0/1
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.16.24.0/24 O_ASE 150 100 D 10.0.0.2 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[AR2]
AR3:
<Huawei>un t m
Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR3
[AR3]user-in con 0
[AR3-ui-console0]idle-timeout 0 0
[AR3-ui-console0]q
[AR3]int g0/0/0
[AR3-GigabitEthernet0/0/0]ip add 10.0.0.2 16
[AR3-GigabitEthernet0/0/0]un shut
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[AR3-GigabitEthernet0/0/0]int g0/0/1
[AR3-GigabitEthernet0/0/1]ip add 10.56.0.1 16
[AR3-GigabitEthernet0/0/1]un shut
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[AR3-GigabitEthernet0/0/1]q
[AR3]int loop 0
[AR3-LoopBack0]ip add 3.3.3.3 32
[AR3-LoopBack0]int loop 1
[AR3-LoopBack1]ip add 100.100.100.100 32
[AR3-LoopBack1]q
[AR3]ospf 1 router-id 3.3.3.3
[AR3-ospf-1]area 0
[AR3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[AR3-ospf-1-area-0.0.0.0]network 100.100.100.100 0.0.0.0
[AR3-ospf-1-area-0.0.0.0]network 10.56.0.0 0.0.255.255
[AR3-ospf-1-area-0.0.0.0]area 1
[AR3-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.255.255
[AR3-ospf-1-area-0.0.0.1]vlink-peer 2.2.2.2
[AR3-ospf-1-area-0.0.0.1]q
[AR3-ospf-1]q
[AR3]disp ospf peer
OSPF Process 1 with Router ID 3.3.3.3
Neighbors
Area 0.0.0.0 interface 10.56.0.1(GigabitEthernet0/0/1)'s neighbors
Router ID: 4.4.4.4 Address: 10.56.0.2
State: Full Mode:Nbr is Master Priority: 1
DR: 10.56.0.1 BDR: 10.56.0.2 MTU: 0
Dead timer due in 34 sec
Retrans timer interval: 5
Neighbor is up for 01:58:39
Authentication Sequence: [ 0 ]
Neighbors
Area 0.0.0.1 interface 10.0.0.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 2.2.2.2 Address: 10.0.0.1
State: Full Mode:Nbr is Slave Priority: 1
DR: 10.0.0.1 BDR: 10.0.0.2 MTU: 0
Dead timer due in 38 sec
Retrans timer interval: 5
Neighbor is up for 01:58:08
Authentication Sequence: [ 0 ]
[AR3]disp ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 20 Routes : 20
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.1/32 OSPF 10 2 D 10.0.0.1 GigabitEthernet
0/0/0
2.2.2.2/32 OSPF 10 1 D 10.0.0.1 GigabitEthernet
0/0/0
3.3.3.3/32 Direct 0 0 D 127.0.0.1 LoopBack0
4.4.4.4/32 OSPF 10 1 D 10.56.0.2 GigabitEthernet
0/0/1
5.5.5.5/32 OSPF 10 2 D 10.56.0.2 GigabitEthernet
0/0/1
6.0.0.0/8 O_ASE 150 100 D 10.56.0.2 GigabitEthernet
0/0/1
10.0.0.0/16 Direct 0 0 D 10.0.0.2 GigabitEthernet
0/0/0
10.0.0.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.0.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.1.0.0/16 OSPF 10 2 D 10.0.0.1 GigabitEthernet
0/0/0
10.2.0.0/16 OSPF 10 2 D 10.56.0.2 GigabitEthernet
0/0/1
10.56.0.0/16 Direct 0 0 D 10.56.0.1 GigabitEthernet
0/0/1
10.56.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
10.56.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
100.100.100.100/32 Direct 0 0 D 127.0.0.1 LoopBack1
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.16.24.0/24 O_ASE 150 100 D 10.56.0.2 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[AR3]
AR4:
<Huawei>un t m
Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR4
[AR4]user-in con 0
[AR4-ui-console0]idle-timeout 0 0
[AR4-ui-console0]q
[AR4]int g0/0/0
[AR4-GigabitEthernet0/0/0]ip add 10.56.0.2 16
[AR4-GigabitEthernet0/0/0]un shut
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[AR4-GigabitEthernet0/0/0]int g0/0/1
[AR4-GigabitEthernet0/0/1]ip add 10.2.0.1 16
[AR4-GigabitEthernet0/0/1]int loop 0
[AR4-LoopBack0]ip add 4.4.4.4 32
[AR4-LoopBack0]q
[AR4]ospf 1 router-id 4.4.4.4
[AR4-ospf-1]area 2
[AR4-ospf-1-area-0.0.0.2]network 4.4.4.4 0.0.0.0
[AR4-ospf-1-area-0.0.0.2]network 10.2.0.0 0.0.255.255
[AR4-ospf-1-area-0.0.0.2]area 0
[AR4-ospf-1-area-0.0.0.0]network 10.56.0.0 0.0.255.255
[AR4-ospf-1-area-0.0.0.0]area 2
[AR4-ospf-1-area-0.0.0.2]nssa no-summary
[AR4-ospf-1-area-0.0.0.2]q
[AR4-ospf-1]q
[AR4]disp ospf peer
OSPF Process 1 with Router ID 4.4.4.4
Neighbors
Area 0.0.0.0 interface 10.56.0.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 3.3.3.3 Address: 10.56.0.1
State: Full Mode:Nbr is Slave Priority: 1
DR: 10.56.0.1 BDR: 10.56.0.2 MTU: 0
Dead timer due in 38 sec
Retrans timer interval: 5
Neighbor is up for 02:12:31
Authentication Sequence: [ 0 ]
Neighbors
Area 0.0.0.2 interface 10.2.0.1(GigabitEthernet0/0/1)'s neighbors
Router ID: 5.5.5.5 Address: 10.2.0.2
State: Full Mode:Nbr is Master Priority: 1
DR: 10.2.0.2 BDR: 10.2.0.1 MTU: 0
Dead timer due in 38 sec
Retrans timer interval: 5
Neighbor is up for 01:18:39
Authentication Sequence: [ 0 ]
[AR4]disp ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 20 Routes : 20
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.1/32 OSPF 10 3 D 10.56.0.1 GigabitEthernet
0/0/0
2.2.2.2/32 OSPF 10 2 D 10.56.0.1 GigabitEthernet
0/0/0
3.3.3.3/32 OSPF 10 1 D 10.56.0.1 GigabitEthernet
0/0/0
4.4.4.4/32 Direct 0 0 D 127.0.0.1 LoopBack0
5.5.5.5/32 OSPF 10 1 D 10.2.0.2 GigabitEthernet
0/0/1
6.0.0.0/8 O_NSSA 150 100 D 10.2.0.2 GigabitEthernet
0/0/1
10.0.0.0/16 OSPF 10 2 D 10.56.0.1 GigabitEthernet
0/0/0
10.1.0.0/16 OSPF 10 3 D 10.56.0.1 GigabitEthernet
0/0/0
10.2.0.0/16 Direct 0 0 D 10.2.0.1 GigabitEthernet
0/0/1
10.2.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
10.2.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
10.56.0.0/16 Direct 0 0 D 10.56.0.2 GigabitEthernet
0/0/0
10.56.0.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.56.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
100.100.100.100/32 OSPF 10 1 D 10.56.0.1 GigabitEthernet
0/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.16.24.0/24 O_NSSA 150 100 D 10.2.0.2 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[AR4]
AR5:
<Huawei>un t m
Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR5
[AR5]user-in con 0
[AR5-ui-console0]idle-timeout 0 0
[AR5-ui-console0]qu
[AR5]int g0/0/0
[AR5-GigabitEthernet0/0/0]ip add 10.2.0.2 16
[AR5-GigabitEthernet0/0/0]un shut
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[AR5-GigabitEthernet0/0/0]int g0/0/1
[AR5-GigabitEthernet0/0/1]ip add 172.16.24.1 24
[AR5-GigabitEthernet0/0/1]int loop 0
[AR5-LoopBack0]ip add 5.5.5.5 32
[AR5-LoopBack0]q
[AR5]ospf 1 router-id 5.5.5.5
[AR5-ospf-1]area 2
[AR5-ospf-1-area-0.0.0.3]network 5.5.5.5 0.0.0.0
[AR5-ospf-1-area-0.0.0.3]network 10.2.0.0 0.0.255.255
[AR5-ospf-1-area-0.0.0.3]qu
[AR5-ospf-1]q
[AR5]rip
[AR5-rip-1]network 172.16.0.0
[AR5-rip-1]network 6.0.0.0
[AR5-rip-1]import-route ospf 1 cost 0
[AR5-rip-1]default-route originate cost 0
[AR5-rip-1]qu
[AR5]ospf
[AR5-ospf-1]import-route rip 1 cost 100
[AR5-ospf-1]area 3
[AR5-ospf-1-area-0.0.0.3]nssa no-summary
[AR5-ospf-1]disp ospf peer
OSPF Process 1 with Router ID 5.5.5.5
Neighbors
Area 0.0.0.2 interface 10.2.0.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 4.4.4.4 Address: 10.2.0.1
State: Full Mode:Nbr is Slave Priority: 1
DR: 10.2.0.2 BDR: 10.2.0.1 MTU: 0
Dead timer due in 37 sec
Retrans timer interval: 5
Neighbor is up for 02:04:04
Authentication Sequence: [ 0 ]
[AR5-ospf-1]q
[AR5-ospf-1]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 14 Routes : 14
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 OSPF 10 2 D 10.2.0.1 GigabitEthernet
0/0/0
4.4.4.4/32 OSPF 10 1 D 10.2.0.1 GigabitEthernet
0/0/0
5.5.5.5/32 Direct 0 0 D 127.0.0.1 LoopBack0
6.0.0.0/8 RIP 100 1 D 172.16.24.2 GigabitEthernet
0/0/1
10.2.0.0/16 Direct 0 0 D 10.2.0.2 GigabitEthernet
0/0/0
10.2.0.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.2.255.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.16.24.0/24 Direct 0 0 D 172.16.24.1 GigabitEthernet
0/0/1
172.16.24.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
172.16.24.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[AR5-ospf-1]
AR6:
<Huawei>un t m
Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn AR6
[AR6]user-in con 0
[AR6-ui-console0]idle-timeout 0 0
[AR6-ui-console0]q
[AR6]int g0/0/0
[AR6-GigabitEthernet0/0/0]ip add 172.16.24.2 24
[AR6-GigabitEthernet0/0/0]un shut
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[AR6-GigabitEthernet0/0/0]int loop 0
[AR6-LoopBack0]ip add 6.6.6.6 32
[AR6-LoopBack0]q
[AR6]rip
[AR6-rip-1]network 6.0.0.0
[AR6-rip-1]net
[AR6-rip-1]network 172.0.0.0
[AR6-rip-1]import-route ospf 1 cost 0
[AR6-rip-1]network 172.16.0.0
[AR6-rip-1]q
[AR6]disp ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 11 Routes : 11
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 RIP 100 1 D 172.16.24.1 GigabitEthernet
0/0/0
5.0.0.0/8 RIP 100 1 D 172.16.24.1 GigabitEthernet
0/0/0
6.6.6.6/32 Direct 0 0 D 127.0.0.1 LoopBack0
10.0.0.0/8 RIP 100 1 D 172.16.24.1 GigabitEthernet
0/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.16.24.0/24 Direct 0 0 D 172.16.24.2 GigabitEthernet
0/0/0
172.16.24.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
172.16.24.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[AR6]