1、脚本内容
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/s5pc11x/start.o (.text)
cpu/s5pc11x/s5pc110/cpu_init.o (.text)
board/samsung/x210/lowlevel_init.o (.text)
cpu/s5pc11x/onenand_cp.o (.text)
cpu/s5pc11x/nand_cp.o (.text)
cpu/s5pc11x/movi.o (.text)
common/secure_boot.o (.text)
common/ace_sha1.o (.text)
cpu/s5pc11x/pmic.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : {
*(.rodata) }
. = ALIGN(4);
.data : {
*(.data) }
. = ALIGN(4);
.got : {
*(.got) }
__u_boot_cmd_start = .;
.u_boot_cmd : {
*(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
.mmudata : {
*(.mmudata) }
. = ALIGN(4);
__bss_start = .;
.bss : {
*(.bss) }
_end = .;
}
2、脚本分析
链接脚本没有什么特别的,主要注意
(1)程序的入口:ENTRY(_start);
(2)在链接脚本中程序链接地址是0x0,但是会被-Ttext $(TEXT_BASE)
覆盖掉,所以实际的链接地址是$(TEXT_BASE)
;
(3).text段中将某些文件靠前排列,因为这些文件都是和BL1相关的,负责启动的第一阶段。
(4).u_boot_cmd段是自定义段,将来uboot的命令结构体都会被赋予这个段属性,集中被链接在一起。__u_boot_cmd_start就是命令集合的起始地址,__u_boot_cmd_end是命令集合的结束地址。