批处理设置无线IP

netsh interface IP set address name="你想修改的网卡名称，例如无线网卡" source=dhcp
netsh interface ip set dns  name="你想修改的网卡名称，例如无线网卡" source=dhcp
rem 批处理自动获取IP

以上复制保存为'自动获取IP.bat'

--------------------------------------------------------------------
netsh interface ip  set address name="你想修改的网卡名称，例如无线网卡"   source = static addr = 10.10.100.223  mask=255.255.255.0    
netsh interface ip set address  name="你想修改的网卡名称，例如无线网卡" gateway = 10.10.100.254  gwmetric =0
netsh interface ip set dns name="你想修改的网卡名称，例如无线网卡" source = static  addr = 10.10.100.254  register=PRIMARY
netsh interface ip add dns name="你想修改的网卡名称，例如无线网卡" addr = 202.97.224.68 index=2
rem 批处理设置静态IP


以上复制保存为'设置静态IP.bat',或者用下面这段也可以
-----------------------------------------
set Nic=无线网络连接
rem //可以根据你的需要更改,
set Addr=192.168.1.11
set Mask=255.255.255.0
set Gway=192.168.1.1
set Dns1=202.99.160.68
set Dns2=202.99.166.4
rem //以上依次为IP地址、子网掩码、网关、首选DNS、备用DNS

======================================自己的

netsh interface ip  set address name=无线网络连接   source = static addr = 10.99.216.76 mask=255.255.255.0
netsh interface ip set address  name=无线网络连接 gateway = 10.99.216.1  gwmetric =0
netsh interface ip set dns name=无线网络连接 source = static  addr = 10.88.254.10
register=PRIMARY
rem 批处理设置静态IP

-------------------------------------------------

netsh interface IP set address name=本地连接 source=dhcp
netsh interface ip set dns  name=本地连接 source=dhcp
rem 批处理自动获取IP