转载：https://blog.csdn.net/kobe24shou/article/details/38374409
E:\VirtualBox>VBoxManage list hdds 首先获取要扩容的虚拟机的 UUID
UUID: a6018b56-dda9-4e92-b2d7-666622cc7fc3
Parent UUID: base
State: locked write
Type: normal (base)
Location: E:\ls\ls1.vdi
Storage format: VDI
Capacity: 20480 MBytes
E:\VirtualBox>VBoxManage modifyhda6018b56-dda9-4e92-b2d7-666622cc7fc3 --resize 25600 （由20480 扩容到 25600）
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
刚开始结果：
[root@ls ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
16G 15G 283M 99% /
/dev/sda1 99M 23M 71M 25% /boot
tmpfs 1.1G 0 1.1G 0% /dev/shm
[root@ls ~]# fdisk -l
Disk /dev/sda: 26.8 GB, 26843545600 bytes
255 heads, 63 sectors/track, 3263 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
DeviceBoot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 2610 20860402+ 8e Linux LVM
这个时候只是容量从20G扩充到25G,但还不能使用
将空余磁盘创建为 sda3
# fdisk /dev/sda （依次输入 n p 3 t 3 8e w ）
n{new partition}
p{primary partition}
3{partition number}
t{change partition id}
3 {partitionnumber}
8e{Linux LVM partition}
w
[root@ls ~]# reboot
查看一下：
[root@ls ~]# fdisk -l /dev/sda
Disk /dev/sda: 26.8 GB, 26843545600 bytes
255 heads, 63 sectors/track, 3263 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
DeviceBoot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 2610 20860402+ 8e Linux LVM
/dev/sda3 2611 3263 5245222+ 8e Linux LVM
调整 LVM 大小先看看当前 Volume Group：
[root@ls~]# vgdisplay
---Volume group ---
VGName VolGroup00
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 5
VGAccess read/write
VGStatus resizable
MAXLV 0
CurLV 2
Open LV 2
MaxPV 0
CurPV 2
ActPV 2
VGSize 19.88 GB
PESize 32.00 MB
Total PE 796
Alloc PE / Size 796 / 24.88GB
Free PE / Size 0 / 0
VGUUID pjf0p4-myx5-QbxW-XK3X-rUFT-jSBS-4uub4T
名称为 VolGroup00，可调整大小（resizable），当前大小为19.88 GB。
活动的 LVM 卷有，
[root@ls ~]# lvscan
ACTIVE '/dev/VolGroup00/LogVol00 '[15.91GB] inherit
ACTIVE '/dev/VolGroup00/LogVol01' [3.97 GB] inherit
先将分配过来的新磁盘空间创建为一个新的物理卷，
[root@ls ~]# pvcreate /dev/sda3
Physical volume "/dev/sda3"successfully created
然后使用新的物理卷来扩展 LVM 的 VolGroup00
vgextend VolGroup00 /dev/sda3
[root@ls ~]# vgextend VolGroup00 /dev/sda3
Volume group "VolGroup00" successfully extended
然后扩展 LVM 的逻辑卷 VolGroup00/LogVol00
[root@ls ~]# lvextend /dev/VolGroup00/LogVol00 /dev/sda3
Extending logical volume LogVol00 to 20.91 GB
Logical volume LogVol00 successfully resized
最后，调整逻辑卷文件系统的大小，
[root@ls ~]# resize2fs /dev/VolGroup00/LogVol00
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/VolGroup00/LogVol00 is mounted on /; on-line resizingrequired
Performing an on-line resize of /dev/VolGroup00/LogVol00 to 5480448 (4k)blocks.
The filesystem on /dev/VolGroup00/LogVol00 is now 5480448 blocks long.
完成。看看效果：
[root@ls ~]# lvscan
ACTIVE '/dev/VolGroup00/LogVol00' [20.91 GB] inherit
ACTIVE '/dev/VolGroup00/LogVol01' [3.97 GB] inheri
另外，几个有用的 LVM 指令（lvm2）：
- lvmdiskscan
- vgdisplay
- pvdisplay
- lvdispay
- vgcreate
- pvcreate
- lvscan
- pvscan
- vgscan
最后结果：
[root@ls ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
21G 15G 4.9G 75% /
/dev/sda1 99M 23M 71M 25% /boot
tmpfs 1.1G 0 1.1G 0% /dev/shm