CentOS7.2网络配置

修改hostname

• vi /etc/hosts

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6i 127.0.0.1 docker2 

docker2为主机名

• vi /etc/hostname

docker2

注意：这是修改配置文件的方式，可以用命令行的方式修改hostname

配置静态的ip

• vi /etc/sysconfig/network-scripts/ifcfg-eno16777736

TYPE=Ethernet
#BOOTPROTO=dhcp
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=ca79f88e-e6ef-485f-93d9-671d4b49afaf
DEVICE=eno16777736
#ONBOOT=no #static ip NM_CONTROLLED=no ONBOOT=yes BOOTPROTO=static HWADDR=00:0c:29:bf:c6:35 IPADDR=192.168.175.211 NETMASK=255.255.255.0 GATEWAY=192.168.175.2 DNS1=192.168.175.2 

HWADDR为mac地址，可以不设置，如果要设置的话，可以先使用ip addr命令查看

• 重启服务service network restart，或者重启主机reboot

修改网卡名称为eth0

• cd /etc/sysconfig/network-scripts/
• 修改文件名
  mv ifcfg-eno16777736 ifcfg-eth0
• 将ifcfg-eth0中的DEVICE=eno16777736修改为DEVICE=eth0，这一步很重要，否则重启服务service network restart会失败报错
  ifcfg-eth0完整配置如下：

TYPE=Ethernet
#BOOTPROTO=dhcp
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=ca79f88e-e6ef-485f-93d9-671d4b49afaf
#DEVICE=eno16777736 #ONBOOT=no #static ip DEVICE=eth0 NM_CONTROLLED=no ONBOOT=yes BOOTPROTO=static HWADDR=00:0c:29:bf:c6:35 IPADDR=192.168.175.211 NETMASK=255.255.255.0 GATEWAY=192.168.175.2 DNS1=192.168.175.2 

• vi /etc/sysconfig/grub或者vi /etc/default/grub
  添加net.ifnames=0 biosdevname=0
  

   

  

   

• 生成启动菜单
  grub2-mkconfig -o /boot/grub2/grub.cfg

• 重启系统生效 reboot

在centos7中继续使用ifconfig命令

• 安装net-tools

[root@docker2 default]# yum list|grep net-tools
net-tools.x86_64                            2.0-0.22.20131004git.el7 base [root@docker2 default]# yum -y install net-tools 

• 使用ifconfig命令

[root@docker2 default]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.175.211 netmask 255.255.255.0 broadcast 192.168.175.255 inet6 fe80::20c:29ff:febf:c635 prefixlen 64 scopeid 0x20<link> ether 00:0c:29:bf:c6:35 txqueuelen 1000 (Ethernet) RX packets 11686 bytes 12134729 (11.5 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3906 bytes 300355 (293.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 

作者：对方不想理你并向你抛出一个异常
链接：https://www.jianshu.com/p/1d3388c88880
來源：简书
简书著作权归作者所有，任何形式的转载都请联系作者获得授权并注明出处。