快速测试 3节点的redis sentinel集群宕机2个节点以后是否仍能正常使用

有同事问我,三个redis sentinel节点,宕机两个节点以后,是否还能够正常的通过redis sentinel正常访问redis的数据。我想了想,理论上是可以的,但是我没试过,今天有时间就测试了一下。搭建环境和测试代码的过程一波三折,以下是配置信息。虚拟机使用的是CENTOS7 ,docker是现成的,redis镜像的版本redis_version:7.0.11 , python是python3

使用docker compose 快速启动 redis节点和sentinel集群,这样会比较快。

docker-compose.yml

version: '3.0'
services:
  master:
    image: redis
    container_name: redis-master
    ports:
      - 6379:6379
    # 这个模式不要用 host,会有问题,用bridge
    network_mode: bridge
    command: redis-server /usr/local/etc/redis/redis.conf
    volumes:
      - ./redis1.conf:/usr/local/etc/redis/redis.conf

  slave1:
    image: redis
    container_name: redis-slave-1
    ports:
      - 6380:6380
    network_mode: bridge
    command: redis-server /usr/local/etc/redis/redis.conf --slaveof 10.4.7.124 6379
    volumes:
      - ./redis2.conf:/usr/local/etc/redis/redis.conf

  slave2:
    image: redis
    container_name: redis-slave-2
    ports:
      - 6381:6381
    network_mode: bridge
    command: redis-server /usr/local/etc/redis/redis.conf --slaveof 10.4.7.124 6379
    volumes:
      - ./redis3.conf:/usr/local/etc/redis/redis.conf

  sentinel1:
    image: redis
    container_name: redis-sentinel-1
    ports:
      - 26379:26379
    network_mode: bridge
    command: redis-sentinel /usr/local/etc/redis/sentinel.conf
    volumes:
      - ./sentinel1.conf:/usr/local/etc/redis/sentinel.conf

  sentinel2:
    image: redis
    container_name: redis-sentinel-2
    ports:
      - 26380:26380
    network_mode: bridge
    command: redis-sentinel /usr/local/etc/redis/sentinel.conf
    volumes:
      - ./sentinel2.conf:/usr/local/etc/redis/sentinel.conf

  sentinel3:
    image: redis
    container_name: redis-sentinel-3
    ports:
      - 26381:26381
    network_mode: bridge
    command: redis-sentinel /usr/local/etc/redis/sentinel.conf
    volumes:
      - ./sentinel3.conf:/usr/local/etc/redis/sentinel.conf

redis1.conf

bind 0.0.0.0
protected-mode no
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize no
supervised no
pidfile /var/run/redis_6379.pid
loglevel notice
logfile ""
databases 16
always-show-logo yes
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump.rdb
dir ./
replica-serve-stale-data yes
replica-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
replica-priority 100
lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
replica-lazy-flush no
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
aof-use-rdb-preamble yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
stream-node-max-bytes 4096
stream-node-max-entries 100
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit replica 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
dynamic-hz yes
aof-rewrite-incremental-fsync yes
rdb-save-incremental-fsync yes

redis2.conf

bind 0.0.0.0
# 这个模式要no,否则不好连接测试
protected-mode no
port 6380
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize no
supervised no
pidfile /var/run/redis_6380.pid
loglevel notice
logfile ""
databases 16
always-show-logo yes
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump.rdb
dir ./
replica-serve-stale-data yes
replica-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
replica-priority 100
lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
replica-lazy-flush no
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
aof-use-rdb-preamble yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
stream-node-max-bytes 4096
stream-node-max-entries 100
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit replica 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
dynamic-hz yes
aof-rewrite-incremental-fsync yes
rdb-save-incremental-fsync yes

redis3.conf

bind 0.0.0.0
protected-mode no
port 6381
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize no
supervised no
pidfile /var/run/redis_6381.pid
loglevel notice
logfile ""
databases 16
always-show-logo yes
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump.rdb
dir ./
replica-serve-stale-data yes
replica-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
replica-priority 100
lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
replica-lazy-flush no
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
aof-use-rdb-preamble yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
stream-node-max-bytes 4096
stream-node-max-entries 100
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit replica 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
dynamic-hz yes
aof-rewrite-incremental-fsync yes
rdb-save-incremental-fsync yes

sentinel1.conf

port 26379
sentinel monitor mymaster 10.4.7.124 6379 2
sentinel down-after-milliseconds mymaster 10000
sentinel failover-timeout mymaster 180000
sentinel parallel-syncs mymaster 1

sentinel2.conf

port 26380                                                                                                                                                                                                                 
sentinel monitor mymaster 10.4.7.124 6379 2                                                                                                                                                                                
sentinel down-after-milliseconds mymaster 10000                                                                                                                                                                            
sentinel failover-timeout mymaster 180000                                                                                                                                                                                  
sentinel parallel-syncs mymaster 1  

sentinel3.conf

port 26381                                                                                                                                                                                                                 
sentinel monitor mymaster 10.4.7.124 6379 2                                                                                                                                                                                
sentinel down-after-milliseconds mymaster 10000                                                                                                                                                                            
sentinel failover-timeout mymaster 180000                                                                                                                                                                                  
sentinel parallel-syncs mymaster 1      

启动所有服务

docker-compose up -d
docker compose up -d
[root@docker_124 sentinel]# docker compose up -d 
[+] Running 6/6
 ✔ Container redis-slave-2     Started                                                                                                                                                                                0.1s 
 ✔ Container redis-sentinel-1  Started                                                                                                                                                                                0.1s 
 ✔ Container redis-sentinel-2  Started                                                                                                                                                                                0.1s 
 ✔ Container redis-sentinel-3  Started                                                                                                                                                                                0.1s 
 ✔ Container redis-master      Started                                                                                                                                                                                0.1s 
 ✔ Container redis-slave-1     Started    

停止所有服务

docker-compose down
[root@docker_124 sentinel]# docker compose up -d 
[+] Running 6/6
 ✔ Container redis-slave-2     Started                                                                                                                                                                                0.1s 
 ✔ Container redis-sentinel-1  Started                                                                                                                                                                                0.1s 
 ✔ Container redis-sentinel-2  Started                                                                                                                                                                                0.1s 
 ✔ Container redis-sentinel-3  Started                                                                                                                                                                                0.1s 
 ✔ Container redis-master      Started                                                                                                                                                                                0.1s 
 ✔ Container redis-slave-1     Started        

集群启动好以后,测试是否正常启动

[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 6379 info replication
# Replication
role:master
connected_slaves:2
slave0:ip=172.17.0.1,port=6380,state=online,offset=170743,lag=1
slave1:ip=172.17.0.1,port=6381,state=online,offset=170743,lag=0
master_failover_state:no-failover
master_replid:c85254ee815510a442514fa73aeba46fc8fb018f
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:170743
second_repl_offset:-1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:1
repl_backlog_histlen:170743

[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 6380
[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 6381
[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 26380
[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 26381
[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 26379
10.4.7.124:26379> sentinel master mymaster
 1) "name"
 2) "mymaster"
 3) "ip"
 4) "10.4.7.124"
 5) "port"
 6) "6379"
 7) "runid"
 8) "8c21a5f4a8fdcabb3677603800a66a2b41c62f3c"
 9) "flags"
10) "master"
   ……省略……

[root@docker_124 sentinel]# docker run -it --rm redis redis-cli -h 10.4.7.124 -p 26379 sentinel slaves mymaster
1)  1) "name"
    2) "172.17.0.1:6381"
    3) "ip"
    4) "172.17.0.1"
    5) "port"
    6) "6381"
    7) "runid"
    8) "10053461cfeedbf53aec9f0afa66570f079483f6"
    9) "flags"
   10) "slave"
   ……省略……

环境正常启动后可以运行Python脚本进行测试

测试python脚本

from redis.sentinel import Sentinel
import time
import random

# 生成随机字符串
def generate_random_str(randomlength=16):
    random_str = ''
    base_str = 'ABCDEFGHIGKLMNOPQRSTUVWXYZabcdefghigklmnopqrstuvwxyz0123456789'
    length = len(base_str) - 1
    for i in range(randomlength):
        random_str += base_str[random.randint(0, length)]
    return random_str


# 连接Redis Sentinel
sentinel = Sentinel([('10.4.7.124', 26379),
                     ('10.4.7.124', 26380),
                     ('10.4.7.124', 26381)
                     ],
                    socket_timeout=0.5)

# 获取主服务器地址
master = sentinel.master_for('mymaster', socket_timeout=0.5, db=0)
w_ret = master.set('foo', 'bar')
print(master)
# 输出:('192.168.31.87', 26379)
# 获取从服务器地址
slave = sentinel.slave_for('mymaster', socket_timeout=0.5, db=0)
print(slave)
# 输出:[('192.168.31.88', 26379)]


while True:
    print('master:', master.get('foo'))
    # master 向redis 插入随机数据
    master.set('foo', generate_random_str(10))
    print('sleep 1s')
    time.sleep(1)

python 程序启动后会每秒请求sentinel地址获取redis连接设置值,然后我将sentinel集群的节点停掉两个(包括master节点),依然可以正常设置值,在redis的 master节点可以获取最新设置的值,说明sentinel节点停掉两个仍是可用状态。

参考文档

  • Dock-compose 搭建redis-sentinel测试环境

    https://www.cnblogs.com/leffss/p/12082361.html

  • python3连接redis sentinel集群

    https://blog.csdn.net/u012887259/article/details/102425691

  • 解决 WARNING: Published ports are discarded when using host network mode 问题

    https://blog.csdn.net/zengNLP/article/details/127220244

  • 安装 docker compose

    我安装完只能用docker compose 不能用docker-compose,不知道为什么。

    yum -y install docker-compose-plugin
    

    https://blog.csdn.net/pushiqiang/article/details/78682323

    https://zhuanlan.zhihu.com/p/570108654

猜你喜欢

转载自blog.csdn.net/wejack/article/details/134863974
今日推荐