一些基本指令
SYST:LANG NAT
Language Selection of Remote Command,
设定仪器的语言模式，有两种： NAT 或 SCPI
NAT Native
SCPI SCPI
SYSSEL CELLULAR
SYSSEL 选择应用程序类型
格式： SYSSEL app
app为以下两种：
CELLULAR When using MX887010A, MX887011A, MX887012A, MX887013A, MX887014A, MX887015A, MX887016A or MX887017A
SRW When using If MX887030A, MX887031A, MX887040A, or MX887050A
当测试Bluetooth/Wifi时选择SRW，一般选择CELLULAR
MCSOPT?
0:12,MX887000A,MX887001A,MX887002A,MX887010A,MX887011A,MX887012A,MX887013A,MX887014A,MX887030A,MX887031A,MX887040A,MX887050A
Type Name of Software，即查询软件名， 或者说查询license列表。
*IDN? para
这是查询设备身份号，the measuring instrument-specific number：为机箱的SN。the module-specific number：小盒子的SN，即测试模组的SN。
另外机箱SN在仪器背面贴着，然后小盒子SN，一个小盒子一个SN，贴在仪器前面。
如果参数para为1
指令响应格式为: ANRITSU,MT8870A,serial,firm
| 响应项 | 含义 |
|---|---|
| ANRITSU | Company name (Anritsu Corporation) |
| MT8870A | Model name |
| serial | Serial number (the measuring instrument-specific number) |
| firm | FPGA version of the measuring instrument |
如果参数para为2
指令响应格式为: ANRITSU,MT8870A:slot:MU887000A,serial1:serial2,firm1:firm2
仪器上的每一个插盒子的插槽叫slot，一个8870 有4个slot，从左到右， 1， 2， 3， 4
| 响应项 | 含义 |
|---|---|
| ANRITSU | Company name (Anritsu Corporation) |
| MT8870A | Model name |
| slot | Number of slot where module installed |
| MU887000A | Model name of the module |
| serial1 | Serial number (the measuring instrument-specific number) |
| serial2 | Serial number (the module-specific number) |
| firm1 | FPGA version of the measuring instrument |
| firm2 | Package version of the module |
如果参数para省略
指令响应格式为: ANRITSU,MU887000A,serial,firm
| 响应项 | 含义 |
|---|---|
| ANRITSU | Company name (Anritsu Corporation) |
| MU887000A | Model name of the module |
| serial | Serial number (the module-specific number) |
| firm | Package version of the module |
SYSERRALL?
0: 0,”No
System All Errors， 查询error/event队列中的错误信息
PORT
Set Direction of RF Connector
设定RF信号的输入/输出 connector
命令格式：PORT input,output
例如：PORT PORT1,PORT2 设置Port1 用于RF信号输入，Port2用于RF信号输出。
Test Port1 and Test Port2 can be set for both input and output.
Test Port3 and Test Port4 can be set for either input or output.
PORT?
0: PORT1,PORT1
port查询指令，从上面的设定指令可看出，这里Port1同时用于RF信号的输入和输出。
BANDCAL_TEMP 2.0;*OPC?
0: 1
BAND Calibration Temperature，这里当距离上次校准温度变化超过2度时，仪器进行自校准。
*RST;*OPC?
0: 1
Preset， 对仪器执行初始化。
license 对照表
| Model/Code | Name |
|---|---|
| MX887010A | Cellular Standards Sequence Measurement |
| MX887011A | W-CDMA/HSPA Uplink TX Measurements |
| MX887012A | GSM/EDGE Uplink TX Measurements |
| MX887013A | LTE FDD Uplink TX Measurements |
| MX887014A | LTE TDD Uplink TX Measurements |
| MX887015A | CDMA2000 Reverse Link TX Measurements |
| MX887016A | 1xEV-DO Reverse Link TX Measurements |
| MX887017A | TD-SCDMA Uplink TX Measurements |
| MX887021A | W-CDMA/HSPA Downlink TX Measurement |
| MX887023A | LTE FDD Downlink TX Measurement |
| MX887030A | WLAN 802.11b/g/a/n TX Measurements |
| MX887031A | WLAN 802.11ac TX Measurements |
| MX887040A | Bluetooth TX Measurements |
| MX887050A | Short Range Wireless Average Power and Frequency Measurements |
| MX887060A | IEEE 802.15.4 TX Measurement |
| MX887070A | FM/Audio TRX Measurement |
| MX887090A | Multi-DUT Measurement Scheduler |
[1]MT8870A Universal Wireless Test Set Operation Manual
[2]MU887000A TRX Test Module Operation Manual
[3]MX887010A Cellular Standards Sequence Measurement Operation Manual