HaProxy+Keepalived+Mycat高可用群集配置

编程语言 2018-05-10 03:07:39 阅读次数: 0

转载：http://www.cnblogs.com/chenmh/p/5194636.html

 

本章节主要介绍配置HaProxy+Keepalived高可用群集，Mycat的配置就不在这里做介绍，可以参考我前面写的几篇关于Mycat的文章。

部署图：

HaProxy安装

181和179两台服务器安装haproxy的步骤一致

--创建haproxy用户
useradd haproxy

--解压完后进入haproxy目录
cd haproxy-1.4.25/

--编译安装
make TARGET=linux26 PREFIX=/usr/local/haproxy ARCH=x86_64

make install PREFIX=/usr/local/haproxy

HaProxy配置

cd /usr/local/haproxy

touch haproxy.cfg

vim haproxy.cfg
 global
    log 127.0.0.1   local0  ##记日志的功能
    maxconn 4096
    chroot /usr/local/haproxy
    user haproxy
    group haproxy
    daemon
defaults
log global
option dontlognull
retries 3
option redispatch
maxconn 2000
contimeout 5000
clitimeout 50000
srvtimeout 50000
listen  admin_stats 192.168.57.180:48800 
      stats uri /admin-status        ##统计页面
      stats auth  admin:admin
      mode    http
      option  httplog
listen allmycat_service 192.168.57.180:8098
      mode tcp
      option tcplog
  option httpchk OPTIONS * HTTP/1.1\r\nHost:\ www
      balance roundrobin
  server mycat_181 192.168.57.181:8066 check port 48700 inter 5s rise 2 fall 3
  server mycat_179 192.168.57.179:8066 check port 48700 inter 5s rise 2 fall 3
      srvtimeout 20000

配置haproxy记录日志功能

yum –y install rsyslog

mkdir /etc/rsyslog.d

cd /etc/rsyslog.d/

touch haproxy.conf

vim haproxy.conf
$ModLoad imudp
$UDPServerRun 514
local0.* /var/log/haproxy.log

vim /etc/rsyslog.conf

在#### RULES #### 上面一行 加入以下内容

# Include all config files in /etc/rsyslog.d/
$IncludeConfig /etc/rsyslog.d/*.conf

在local7.* /var/log/boot.log下面加入以下内容

local0.* /var/log/haproxy.log

重启rsyslog服务

service rsyslog restart

将rsyslog加入自动启动服务

chkconfig --add rsyslog
chkconfig --level 2345 rsyslog on

配置监听mycat是否存活

安装xinetd插件

yum install xinetd -y
cd /etc/xinetd.d

touch mycat_status

vim mycat_status
service mycat_status
{
flags = REUSE
socket_type = stream
port = 48700
wait = no
user = nobody
server =/usr/local/bin/mycat_status
log_on_failure += USERID
disable = no
}

创建xinetd启动服务脚本

vim /usr/local/bin/mycat_status

#!/bin/bash
#/usr/local/bin/mycat_status.sh
# This script checks if a mycat server is healthy running on localhost. It will
# return:
#
# "HTTP/1.x 200 OK\r" (if mycat is running smoothly)
#
# "HTTP/1.x 503 Internal Server Error\r" (else)
mycat=`/usr/local/mycat/bin/mycat status |grep 'not running'| wc -l`
if [ "$mycat" = "0" ];
then
/bin/echo -e "HTTP/1.1 200 OK\r\n"
else
/bin/echo -e "HTTP/1.1 503 Service Unavailable\r\n"
fi

修改脚本文件权限

我就是在这里被坑了很久,根据权威指南上面mycat_status这个脚本里面的内容也有很多问题，好几个地方没有空格.

chmod 777 /usr/local/bin/mycat_status
chmod 777 /etc/xinetd.d/mycat_status

将启动脚本加入服务

vim /etc/services

在末尾加入

mycat_status 48700/tcp # mycat_status

重启xinetd服务

service xinetd restart

将xinetd加入自启动服务

chkconfig --add xinetd
chkconfig --level 2345 xinetd on

页面测试

http://192.168.57.180:48800/admin-status

由于179还没有安装好，所以这里179显示连接失败

创建haproxy启停脚本

启动脚本

touch /usr/local/haproxy/sbin/start
chmod +x /usr/local/haproxy/sbin/start
vim  /usr/local/haproxy/sbin/start
#!/bin/sh
/usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/haproxy.cfg &

关闭脚本

touch /usr/local/haproxy/sbin/stop
chmod +x /usr/local/haproxy/sbin/stop
vim /usr/local/haproxy/sbin/stop
#!/bin/sh
ps -ef | grep sbin/haproxy | grep -v grep |awk '{print $2}'|xargs kill -s 9

授权

chown -R haproxy.haproxy /usr/local/haproxy/*

Keepalived安装步骤

keepalived的安装步骤过程在两台服务器上除了keepalived.conf配置文件稍微有点区别外其他的地方都一致。

openssl安装

./config --prefix=/usr/local/openssl
./config -t
make depend
make
make test
make install
ln -s /usr/local/openssl /usr/local/ssl

vim /etc/ld.so.conf

在文件末尾加入以下内容

/usr/local/openssl/lib

修改环境变量

vim /etc/profile

在文件末尾加入以下内容

export OPENSSL=/usr/local/openssl/bin
export PATH=$PATH:$OPENSSL

使环境变量立刻生效

source /etc/profile

安装openssl-devel

yum install openssl-devel -y

测试

ldd /usr/local/openssl/bin/openssl
linux-vdso.so.1 => (0x00007fff996b9000)
libdl.so.2 =>/lib64/libdl.so.2 (0x00000030efc00000)
libc.so.6 =>/lib64/libc.so.6 (0x00000030f0000000)
/lib64/ld-linux-x86-64.so.2 (0x00000030ef800000)
which openssl
/usr/bin/openssl
openssl version
OpenSSL 1.0.0-fips 29 Mar 2010

keepalived安装

./configure --prefix=/usr/local/keepalived
make
make install
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
mkdir /etc/keepalived
cd /etc/keepalived/
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived
mkdir -p  /usr/local/keepalived/var/log

创建配置文件和脚本

mkdir /etc/keepalived/scripts

cd /etc/keepalived/scripts

vim /etc/keepalived/keepalived.conf

master

! Configuration Fileforkeepalived
vrrp_script chk_http_port {
script"/etc/keepalived/scripts/check_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state MASTER #192.168.57.179上改为BACKUP
interface eth0 #对外提供服务的网络接口
virtual_router_id 51 #VRRP组名，两个节点的设置必须一样，以指明各个节点属于同一VRRP组
priority 150 #数值愈大，优先级越高,backup上改为120
advert_int 1 #同步通知间隔
authentication { #包含验证类型和验证密码。类型主要有PASS、AH两种，通常使用的类型为PASS，据说AH使用时有问题
auth_type PASS
auth_pass 1111
}
track_script {
chk_http_port #调用脚本check_haproxy.sh检查haproxy是否存活
}
virtual_ipaddress { #vip地址，这个ip必须与我们在lvs客户端设定的vip相一致
192.168.57.180 dev eth0 scope global
}
notify_master /etc/keepalived/scripts/haproxy_master.sh
notify_backup /etc/keepalived/scripts/haproxy_backup.sh
notify_fault /etc/keepalived/scripts/haproxy_fault.sh
notify_stop /etc/keepalived/scripts/haproxy_stop.sh
}

backup

! Configuration Fileforkeepalived
vrrp_script chk_http_port {
script"/etc/keepalived/scripts/check_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP #192.168.57.179上改为BACKUP
interface eth0 #对外提供服务的网络接口
virtual_router_id 51 #VRRP组名，两个节点的设置必须一样，以指明各个节点属于同一VRRP组
priority 120 #数值愈大，优先级越高,backup上改为120
advert_int 1 #同步通知间隔
authentication { #包含验证类型和验证密码。类型主要有PASS、AH两种，通常使用的类型为PASS，据说AH使用时有问题
auth_type PASS
auth_pass 1111
}
track_script {
chk_http_port #调用脚本check_haproxy.sh检查haproxy是否存活
}
virtual_ipaddress { #vip地址，这个ip必须与我们在lvs客户端设定的vip相一致
192.168.57.180 dev eth0 scope global
}
notify_master /etc/keepalived/scripts/haproxy_master.sh
notify_backup /etc/keepalived/scripts/haproxy_backup.sh
notify_fault /etc/keepalived/scripts/haproxy_fault.sh
notify_stop /etc/keepalived/scripts/haproxy_stop.sh
}

vim /etc/keepalived/scripts/check_haproxy.sh

#!/bin/bash
STARTHAPROXY="/usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/haproxy.cfg"
STOPKEEPALIVED="/etc/init.d/keepalived stop"
LOGFILE="/usr/local/keepalived/var/log/keepalived-haproxy-state.log"
echo "[check_haproxy status]" >> $LOGFILE
A=`ps -C haproxy --no-header |wc -l`
echo "[check_haproxy status]" >> $LOGFILE
date >> $LOGFILE
if [ $A -eq 0 ];then
echo $STARTHAPROXY >> $LOGFILE
$STARTHAPROXY >> $LOGFILE 2>&1
sleep 5
fi
if [ `ps -C haproxy --no-header |wc -l` -eq 0 ];then
exit 0
else
exit 1
fi

vim /etc/keepalived/scripts/haproxy_master.sh

#!/bin/bash
STARTHAPROXY=`/usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/haproxy.cfg`
STOPHAPROXY=`ps -ef | grep sbin/haproxy | grep -v grep | awk '{print $2}'| xargs kill -s 9`
LOGFILE="/usr/local/keepalived/var/log/keepalived-haproxy-state.log"
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
echo "stop haproxy...." >> $LOGFILE 2>&1
$STOPHAPROXY >> $LOGFILE 2>&1
echo "start haproxy...." >> $LOGFILE 2>&1
$STARTHAPROXY >> $LOGFILE 2>&1
echo "haproxy stared ..." >> $LOGFILE

vim /etc/keepalived/scripts/haproxy_backup.sh

#!/bin/bash
STARTHAPROXY=`/usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/haproxy.cfg`
STOPHAPROXY=`ps -ef | grep sbin/haproxy | grep -v grep | awk '{print $2}'| xargs kill -s 9`
LOGFILE="/usr/local/keepalived/var/log/keepalived-haproxy-state.log"
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being backup...." >> $LOGFILE 2>&1
echo "stop haproxy...." >> $LOGFILE 2>&1
$STOPHAPROXY >> $LOGFILE 2>&1
echo "start haproxy...." >> $LOGFILE 2>&1
$STARTHAPROXY >> $LOGFILE 2>&1
echo "haproxy stared ..." >> $LOGFILE

vim /etc/keepalived/scripts/haproxy_fault.sh

#!/bin/bash
LOGFILE=/usr/local/keepalived/var/log/keepalived-haproxy-state.log
echo "[fault]" >> $LOGFILE
date >> $LOGFILE

vim /etc/keepalived/scripts/haproxy_stop.sh

#!/bin/bash
LOGFILE=/usr/local/keepalived/var/log/keepalived-haproxy-state.log
echo "[stop]" >> $LOGFILE
date >> $LOGFILE

赋予脚本可执行权限

chmod 777 /etc/keepalived/scripts/*

将keepalived加入自启动服务

chkconfig --add keepalived
chkconfig --level 2345 keepalived on

--启动服务
service keepalived start

权威指南上面代码部分好多处都存在问题，几乎每一块代码都存在问题，有时候往往一个空格需要花很长的时间去找这个问题，所以在代码方面要细心；特别是复制别人的代码不要原本照抄最好是检查一下，除了代码本身的问题权限有时候也是容易忽略的错误，特别是可执行文件要注意是否有可执行权限。

猜你喜欢

转载自1028826685.iteye.com/blog/2313233
今日推荐
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
LFOSSA 源来如此公开课 | 掌握云原生未来：CNCF 认证全面攻略与备考秘籍
国产云输入法——仅华为无云端数据上传安全问题
开源日报 | 工业开源项目OGG 1.0；姐姐，你要和我一起配置火狐吗；苹果AI遥遥落后？Fedora 40
开放签电子签章：停止新增，优化体验，前进更进（五一假期前工作）
周排行
Metasploit文件目录与入侵基本概念
跨域(CORS)请求问题[No 'Access-Control-Allow-Origin' header is present on the requested resource]常见解决方案
CodeIgniter 源码解读之 CodeIgniter.php（二）
SAS入门之（四）改变数据类型
初识元组
[数学建模]数学建模算法和模型（B站视频）（二）
Nginx 服务器源码安装配置流程
C#实现语音视频录制 【基于MCapture + MFile】
开发进度4
下载安装vue的方法网址
每日归档
更多
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)
2024-04-23(26)
2024-04-22(39)
2024-04-21(0)
2024-04-20(6)
2024-04-19(5)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022