配置trap事件，故只需要使用一个命令就是snmpconfig这个命令，这个命令的格式如下
Usage: snmpConfig [--show | --set | --default] [snmpv1 | snmpv3 | accessControl | mibCapability | systemGroup | secLevel]
我这里设置snmpv1版
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
swd77:admin> snmpconfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [Secret C0de] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 0
Trap recipient Port : (0..65535) [162]
Community (rw): [OrigEquipMfr] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (rw): [private] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (ro): [public] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (ro): [common] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (ro): [FibreChannel] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Committing configuration.....done.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
这里已经显示配置完成！
再使用发送命令进行测试：
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
swd77:admin> snmptraps --send -ip_address 10.0.1.83
Number of traps sent : 21
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
发送完成，如果不配置直接使用以上命令，那就会出现以下错误
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
swd77:admin> snmpTraps --send -ip_address 10.0.1.83
Trap receiver ip address not configured: 10.0.1.83