MYSQL+Amoeba读写分离

一、部署环境：
amoeba:192.168.0.235
masterDB：192.168.0.225
slaveDB：192.168.0.213
以上系统全为centos7
安装好JDK1.5版本以上的，masterDB和slaveDB配置好主从复制关系。
二、安装Amoeba
1.解压即可使用，这里将Amoeba解压到/usr/local/amoeba目录下

wget http://jaist.dl.sourceforge.net/project/amoeba/Amoeba%20for%20mysql/3.x/amoeba-mysql-3.0.5-RC-distribution.zip

unzip  amoeba-mysql-3.0.5-RC-distribution.zip

mv amoeba-mysql-3.0.5-RC /usr/local/amoeba

2.配置Amoeba
Amoeba的配置文件在本环境下位于/usr/local/amoeba/conf目录下。配置文件比较多，但是仅仅使用读写分离功能，只需配置两个文件即可，分别是dbServers.xml和amoeba.xml，如果需要配置ip访问控制，还需要修改access_list.conf文件，下面首先介绍dbServers.xml

[root@bogon amoeba]# cat conf/dbServers.xml 
<?xml version="1.0" encoding="gbk"?>

<!DOCTYPE amoeba:dbServers SYSTEM "dbserver.dtd">
<amoeba:dbServers xmlns:amoeba="http://amoeba.meidusa.com/">

        <!-- 
            Each dbServer needs to be configured into a Pool,
            If you need to configure multiple dbServer with load balancing that can be simplified by the following configuration:
             add attribute with name virtual = "true" in dbServer, but the configuration does not allow the element with name factoryConfig
             such as 'multiPool' dbServer   
        -->
        
    <dbServer name="abstractServer" abstractive="true">
        <factoryConfig class="com.meidusa.amoeba.mysql.net.MysqlServerConnectionFactory">
            <property name="connectionManager">${defaultManager}</property>
            <property name="sendBufferSize">64</property>
            <property name="receiveBufferSize">128</property>
                
            <!-- mysql port -->
            <property name="port">3306</property>　　#设置Amoeba要连接的mysql数据库的端口，默认是3306
            
            <!-- mysql schema -->
            <property name="schema">testdb</property>　　#设置缺省的数据库，当连接amoeba时，操作表必须显式的指定数据库名，即采用dbname.tablename的方式，不支持 use dbname指定缺省库，因为操作会调度到各个后端dbserver
            
            <!-- mysql user -->
            <property name="user">root</property>　　#设置amoeba连接后端数据库服务器的账号和密码，因此需要在所有后端数据库上创建该用户，并授权amoeba服务器可连接
            
            <property name="password">220316</property>
        </factoryConfig>

        <poolConfig class="com.meidusa.toolkit.common.poolable.PoolableObjectPool">
            <property name="maxActive">500</property>　　#最大连接数，默认500
            <property name="maxIdle">500</property>　　　　#最大空闲连接数
            <property name="minIdle">1</property>　　　　#最新空闲连接数
            <property name="minEvictableIdleTimeMillis">600000</property>
            <property name="timeBetweenEvictionRunsMillis">600000</property>
            <property name="testOnBorrow">true</property>
            <property name="testOnReturn">true</property>
            <property name="testWhileIdle">true</property>
        </poolConfig>
    </dbServer>

    <dbServer name="writedb"  parent="abstractServer">　　#设置一个后端可写的dbServer，这里定义为writedb，这个名字可以任意命名，后面还会用到
        <factoryConfig>
            <!-- mysql ip -->
            <property name="ipAddress">192.168.2.204</property> #设置后端可写dbserver
        </factoryConfig>
    </dbServer>
    
    <dbServer name="slave"  parent="abstractServer">　　#设置后端可读dbserver
        <factoryConfig>
            <!-- mysql ip -->
            <property name="ipAddress">192.168.2.205</property>
        </factoryConfig>
    </dbServer>
    
    <dbServer name="myslave" virtual="true">　　#设置定义一个虚拟的dbserver，实际上相当于一个dbserver组，这里将可读的数据库ip统一放到一个组中，将这个组的名字命名为myslave
        <poolConfig class="com.meidusa.amoeba.server.MultipleServerPool">
            <!-- Load balancing strategy: 1=ROUNDROBIN , 2=WEIGHTBASED , 3=HA-->
            <property name="loadbalance">1</property>　　#选择调度算法，1表示复制均衡，2表示权重，3表示HA， 这里选择1
            
            <!-- Separated by commas,such as: server1,server2,server1 -->
            <property name="poolNames">slave</property>　　#myslave组成员
        </poolConfig>
    </dbServer>
       
</amoeba:dbServers>

配置文件amoeba.xml

[root@bogon amoeba]# cat conf/amoeba.xml 
<?xml version="1.0" encoding="gbk"?>

<!DOCTYPE amoeba:configuration SYSTEM "amoeba.dtd">
<amoeba:configuration xmlns:amoeba="http://amoeba.meidusa.com/">

    <proxy>
    
        <!-- service class must implements com.meidusa.amoeba.service.Service -->
        <service name="Amoeba for Mysql" class="com.meidusa.amoeba.mysql.server.MySQLService">
            <!-- port -->
            <property name="port">8066</property>　　　　#设置amoeba监听的端口，默认是8066
            
            <!-- bind ipAddress -->　　　　#下面配置监听的接口，如果不设置，默认监听所以的IP
            <!-- 
            <property name="ipAddress">127.0.0.1</property>
             -->
            
            <property name="connectionFactory">
                <bean class="com.meidusa.amoeba.mysql.net.MysqlClientConnectionFactory">
                    <property name="sendBufferSize">128</property>
                    <property name="receiveBufferSize">64</property>
                </bean>
            </property>
            
            <property name="authenticateProvider">
                <bean class="com.meidusa.amoeba.mysql.server.MysqlClientAuthenticator">
                    
# 提供客户端连接amoeba时需要使用这里设定的账号 (这里的账号密码和amoeba连接后端数据库服务器的密码无关)
                    <property name="user">root</property>　　　　

                    
                    <property name="password">123456</property>
                    
                    <property name="filter">
                        <bean class="com.meidusa.toolkit.net.authenticate.server.IPAccessController">
                            <property name="ipFile">${amoeba.home}/conf/access_list.conf</property>
                        </bean>
                    </property>
                </bean>
            </property>
            
        </service>
        
        <runtime class="com.meidusa.amoeba.mysql.context.MysqlRuntimeContext">
            
            <!-- proxy server client process thread size -->
            <property name="executeThreadSize">128</property>
            
            <!-- per connection cache prepared statement size  -->
            <property name="statementCacheSize">500</property>
            
            <!-- default charset -->
            <property name="serverCharset">utf8</property>
            
            <!-- query timeout( default: 60 second , TimeUnit:second) -->
            <property name="queryTimeout">60</property>
        </runtime>
        
    </proxy>
    
    <!-- 
        Each ConnectionManager will start as thread
        manager responsible for the Connection IO read , Death Detection
    -->
    <connectionManagerList>
        <connectionManager name="defaultManager" class="com.meidusa.toolkit.net.MultiConnectionManagerWrapper">
            <property name="subManagerClassName">com.meidusa.toolkit.net.AuthingableConnectionManager</property>
        </connectionManager>
    </connectionManagerList>
    
        <!-- default using file loader -->
    <dbServerLoader class="com.meidusa.amoeba.context.DBServerConfigFileLoader">
        <property name="configFile">${amoeba.home}/conf/dbServers.xml</property>
    </dbServerLoader>
    
    <queryRouter class="com.meidusa.amoeba.mysql.parser.MysqlQueryRouter">
        <property name="ruleLoader">
            <bean class="com.meidusa.amoeba.route.TableRuleFileLoader">
                <property name="ruleFile">${amoeba.home}/conf/rule.xml</property>
                <property name="functionFile">${amoeba.home}/conf/ruleFunctionMap.xml</property>
            </bean>
        </property>
        <property name="sqlFunctionFile">${amoeba.home}/conf/functionMap.xml</property>
        <property name="LRUMapSize">1500</property>
        <property name="defaultPool">writedb</property>　　#设置amoeba默认的池，这里设置为writedb
        
        <property name="writePool">writedb</property>　　#这两个选项默认是注销掉的，需要取消注释，这里用来指定前面定义好的俩个读写池
        <property name="readPool">myslave</property>
        
        <property name="needParse">true</property>
    </queryRouter>
</amoeba:configuration>

3.在masterdb上创建数据库testdb

mysql> create database testdb;
Query OK, 1 row affected (0.08 sec)

mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mydb               |
| mysql              |
| performance_schema |
| test               |
| testdb             |
+--------------------+
6 rows in set (0.00 sec)

查看slavedb是否复制成功

mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mydb               |
| mysql              |
| performance_schema |
| test               |
| testdb             |
+--------------------+
6 rows in set (0.00 sec)

4.分别在masterdb和slavedb上为amoedb授权

mysql> GRANT ALL ON testdb.* TO 'test1'@'192.168.2.203' IDENTIFIED BY '111111';
Query OK, 0 rows affected (0.05 sec)

mysql> flush privileges;
Query OK, 0 rows affected (0.02 sec)

5.启动amoeba

root@bogon amoeba]# /usr/local/amoeba/bin/launcher
Error: JAVA_HOME environment variable is not set.
[root@bogon amoeba]# vim /etc/profile
[root@bogon amoeba]# source /etc/profile
[root@bogon amoeba]# /usr/local/amoeba/bin/launcher
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=16m; support was removed in 8.0
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=96m; support was removed in 8.0

The stack size specified is too small, Specify at least 228k
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.

报错:

Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
从错误文字上看，应该是由于stack size太小，导致JVM启动失败，要如何修改呢？
其实Amoeba已经考虑到这个问题，并将JVM参数配置写在属性文件里。现在，让我们通过该属性文件修改JVM参数。
修改jvm.properties文件JVM_OPTIONS参数。

[root@bogon amoeba]# vim /usr/local/amoeba/jvm.properties 
改成：JVM_OPTIONS="-server -Xms1024m -Xmx1024m -Xss256k -XX:PermSize=16m -XX:MaxPermSize=96m"
原为：JVM_OPTIONS="-server -Xms256m -Xmx1024m -Xss196k -XX:PermSize=16m -XX:MaxPermSize=96m"

再次启动

[root@bogon ~]# /usr/local/amoeba/bin/launcher
    at org.codehaus.plexus.classworlds.launcher.Launcher.launchStandard(Launcher.java:329)
    at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:239)
    at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409)
    at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:127)
    at org.codehaus.classworlds.Launcher.main(Launcher.java:110)
Caused by: com.meidusa.toolkit.common.bean.util.InitialisationException: default pool required!,defaultPool=writedb invalid
    at com.meidusa.amoeba.route.AbstractQueryRouter.init(AbstractQueryRouter.java:469)
    at com.meidusa.amoeba.context.ProxyRuntimeContext.initAllInitialisableBeans(ProxyRuntimeContext.java:337)
    ... 11 more
 2018-10-24 18:46:37 [INFO] Project Name=Amoeba-MySQL, PID=1577 , System shutdown ....
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=16m; support was removed in 8.0
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=96m; support was removed in 8.0
 2018-10-24 18:50:19 [INFO] Project Name=Amoeba-MySQL, PID=1602 , starting...
log4j:WARN log4j config load completed from file:/usr/local/amoeba/conf/log4j.xml
2018-10-24 18:50:21,668 INFO  context.MysqlRuntimeContext - Amoeba for Mysql current versoin=5.1.45-mysql-amoeba-proxy-3.0.4-BETA
log4j:WARN ip access config load completed from file:/usr/local/amoeba/conf/access_list.conf
2018-10-24 18:50:22,852 INFO  net.ServerableConnectionManager - Server listening on 0.0.0.0/0.0.0.0:8066.

6.测试
远程登陆mysql客户端通过指定amoeba配置文件中指定的用户名、密码、和端口以及amoeba服务器ip地址链接mysql数据库

mysql -h192.168.0.235 -uroot -p -P8066

在testdb中创建表test并插入数据，分别登陆masterdb和slavedb查看数据是否同步。如果同步，关掉masterdb，就会插入失败。关掉slavedb，就会查看失败。只有同时启动masterdb和slavedb，才可以正常插入和查看。
注意：mysql主从同步配置可以查看博主的其他笔记

---

其他拓展：
Amoeba主配置文件($AMOEBA_HOME/conf/amoeba.xml)，用来配置Amoeba服务的基本参数，如Amoeba主机地址、端口、认证方式、用于连接的用户名、密码、线程数、超时时间、其他配置文件的位置等。

数据库服务器配置文件($AMOEBA_HOME/conf/dbServers.xml)，用来存储和配置Amoeba所代理的数据库服务器的信息，如:主机IP、端口、用户名、密码等。

切分规则配置文件($AMOEBA_HOME/conf/rule.xml)，用来配置切分规则。

数据库函数配置文件($AMOEBA_HOME/conf/functionMap.xml)，用来配置数据库函数的处理方法，Amoeba将使用该配置文件中的方法解析数据库函数。

切分规则函数配置文件($AMOEBA_HOME/conf/ruleFunctionMap.xml)，用来配置切分规则中使用的用户自定义函数的处理方法。

访问规则配置文件($AMOEBA_HOME/conf/access_list.conf)，用来授权或禁止某些服务器IP访问Amoeba。

日志规格配置文件($AMOEBA_HOME/conf/log4j.xml)，用来配置Amoeba输出日志的级别和方式。