Linux Kernel ：内核与用户层通信之netlink

其他 2019-06-11 08:51:21 阅读次数: 0

转 ： https://blog.csdn.net/stone8761/article/details/72780863

内核与用户空间通信有很多种通信方式，netlink是其中一种，其余的还有/proc、ioctl、sockopt、共享内存等等。netlink的特点是异步全双工。

netlink使用32位端口寻址，称为pid（与进程号没有关系），其中内核的pid地址为0,。netlink主要特性如下：

1 支持全双工、异步通信(当然同步也支持)

2 用户空间可使用标准的BSD socket接口(但netlink并没有屏蔽掉协议包的构造与解析过程，推荐使用libnl等第三方库)

3 在内核空间使用专用的内核API接口

4 支持多播(因此支持“总线”式通信，可实现消息订阅)

5 在内核端可用于进程上下文与中断上下文

基本数据结构：
在这里插入图片描述

struct msghdr {
    void         *msg_name;       /* optional address */
    socklen_t     msg_namelen;    /* size of address */
    struct iovec *msg_iov;        /* scatter/gather array */
    size_t        msg_iovlen;     /* # elements in msg_iov */
    void         *msg_control;    /* ancillary data, see below */
    size_t        msg_controllen; /* ancillary data buffer len */
    int           msg_flags;      /* flags (unused) */
};
 
struct sockaddr_nl
{
    sa_family_t nl_family; /*该字段总是为AF_NETLINK */
    unsigned short nl_pad; /* 目前未用到，填充为0*/
    __u32 nl_pid; /* process pid */
    __u32 nl_groups; /* multicast groups mask */
};

struct sockaddr_nl是netlink通信地址，和我们通常socket编程中的sockaddr_in作用一样。pid表示通信端口，groups表示组，注意这里为希望加入多播组号的掩码，也就是说最多只支持32个组

struct nlmsghdr
{
    __u32 nlmsg_len; /* Length of message including header */
    __u16 nlmsg_type; /* Message content */
    __u16 nlmsg_flags; /* Additional flags */
    __u32 nlmsg_seq; /* Sequence number */
    __u32 nlmsg_pid; /* Sending process PID */
};

Netlink报文的数据区由消息头和消息体构成，struct nlmsghdr即为消息头，消息体接在消息头后。

内核层操作

创建socket

static inline struct sock *
netlink_kernel_create(struct net *net, int unit, struct netlink_kernel_cfg *cfg);

net: 一般直接填&init_net
unit：协议类型，可自定义，如#define NETLINK_TEST 25
cfg：配置结构，类型如下：

/* optional Netlink kernel configuration parameters */
struct netlink_kernel_cfg {
	unsigned int	groups;
	unsigned int	flags;
	void		(*input)(struct sk_buff *skb);
	struct mutex	*cb_mutex;
	int		(*bind)(struct net *net, int group);
	void		(*unbind)(struct net *net, int group);
	bool		(*compare)(struct net *net, struct sock *sk);
};

groups：组编号；
input：接收回调函数，接收一个sk_buff结构，数据包含一个nlmsghdr协议头；
return：返回一个sock结构，返回NULL表示创建失败；
单播发送接口：
extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 portid, int nonblock);

(1) ssk：为函数 netlink_kernel_create()返回的socket。

(2) skb：存放消息，它的data字段指向要发送的netlink消息结构，而 skb的控制块保存了消息的地址信息，宏NETLINK_CB(skb)就用于方便设置该控制块。

(3) portid：pid端口。

(4) nonblock：表示该函数是否为非阻塞，如果为1，该函数将在没有接收缓存可利用时立即返回；而如果为0，该函数在没有接收缓存可利用定时睡眠。

多播发送接口：

extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 portid,
			     __u32 group, gfp_t allocation);

group：接收消息的多播组，该参数的每一个位代表一个多播组，因此如果发送给多个多播组；
allocation：内存分配类型，一般地为GFP_ATOMIC或GFP_KERNEL，GFP_ATOMIC用于原子的上下文（即不可以睡眠），而GFP_KERNEL用于非原子上下文。

释放socket

extern void netlink_kernel_release(struct sock *sk);
用户层操作

nlmsghdr结构常见操作：

NLMSG_SPACE(len): 将len加上nlmsghdr头长度，并按4字节对齐；

NLMSG_DATA(nlh): 返回数据区首地址；

创建socket

int netlink_create_socket(void)
{
        //create a socket
        return socket(AF_NETLINK, SOCK_RAW, NETLINK_TEST);
}

bind

int netlink_bind(int sock_fd)
{
        struct sockaddr_nl addr;
 
        memset(&addr, 0, sizeof(struct sockaddr_nl));
        addr.nl_family = AF_NETLINK;
        addr.nl_pid = TEST_PID;
        addr.nl_groups = 0;
 
        return bind(sock_fd, (struct sockaddr *)&addr, sizeof(struct sockaddr_nl));
}

发送接收：
使用sendmsg、recvmsg发送接收数据

ssize_t sendmsg(int sockfd, const struct msghdr *msg, int flags);
ssize_t recvmsg(int sockfd, struct msghdr *msg, int flags);

使用sendto、recvfrom发送接收数据：

ssize_t sendto(int sockfd, const void *buf, size_t len, int flags,
                      const struct sockaddr *dest_addr, socklen_t addrlen);
ssize_t recvfrom(int sockfd, void *buf, size_t len, int flags,
                        struct sockaddr *src_addr, socklen_t *addrlen);

例：
说明：用户层pid设置为100，应用层发送一条信息到内核，内核回复同样的信息；

内核层：

#include <linux/init.h>
#include <linux/module.h>
#include <linux/stat.h>
#include <linux/kdev_t.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/cdev.h>
#include <asm/uaccess.h>
 
#include <net/netlink.h>
#include <net/sock.h>
 
#define NETLINK_TEST (25)
 
static dev_t devId;
static struct class *cls = NULL;
struct sock *nl_sk = NULL;
 
static void
hello_cleanup(void)
{
        netlink_kernel_release(nl_sk);
        device_destroy(cls, devId);
        class_destroy(cls);
        unregister_chrdev_region(devId, 1);
}
 
static void
netlink_send(int pid, uint8_t *message, int len)
{
        struct sk_buff *skb_1;
        struct nlmsghdr *nlh;
 
        if(!message || !nl_sk) {
                return;
        }
 
        skb_1 = alloc_skb(NLMSG_SPACE(len), GFP_KERNEL);
        if( !skb_1 ) {
                printk(KERN_ERR "alloc_skb error!\n");
        }
 
        nlh = nlmsg_put(skb_1, 0, 0, 0, len, 0);
        NETLINK_CB(skb_1).portid = 0;
        NETLINK_CB(skb_1).dst_group = 0;
        memcpy(NLMSG_DATA(nlh), message, len);
        netlink_unicast(nl_sk, skb_1, pid, MSG_DONTWAIT);
}
 
static void
netlink_input(struct sk_buff *__skb)
{
        struct sk_buff *skb;
        char str[100];
        struct nlmsghdr *nlh;
 
        if( !__skb ) {
                return;
        }
 
        skb = skb_get(__skb);
        if( skb->len < NLMSG_SPACE(0)) {
                return;
        }
 
        nlh = nlmsg_hdr(skb);
        memset(str, 0, sizeof(str));
        memcpy(str, NLMSG_DATA(nlh), sizeof(str));
        printk(KERN_INFO "receive message (pid:%d):%s\n", nlh->nlmsg_pid, str);
        printk(KERN_INFO "space:%d\n", NLMSG_SPACE(0));
        printk(KERN_INFO "size:%d\n", nlh->nlmsg_len);
        netlink_send(nlh->nlmsg_pid, NLMSG_DATA(nlh), nlh->nlmsg_len - NLMSG_SPACE(0));
 
        return;
}
 
static __init int netlink_init(void)
{
        int result;
        struct netlink_kernel_cfg nkc;
 
        printk(KERN_WARNING "netlink init start!\n");
 
        //动态注册设备号
        if(( result = alloc_chrdev_region(&devId, 0, 1, "stone-alloc-dev") ) != 0) {
                printk(KERN_WARNING "register dev id error:%d\n", result);
                goto err;
        } else {
                printk(KERN_WARNING "register dev id success!\n");
        }
        //动态创建设备节点
        cls = class_create(THIS_MODULE, "stone-class");
        if(IS_ERR(cls)) {
                printk(KERN_WARNING "create class error!\n");
                goto err;
        }
        if(device_create(cls, NULL, devId, "", "hello%d", 0) == NULL) {
                printk(KERN_WARNING "create device error!\n");
                goto err;
        }
 
        //初始化netlink
        nkc.groups = 0;
        nkc.flags = 0;
        nkc.input = netlink_input;
        nkc.cb_mutex = NULL;
        nkc.bind = NULL;
        nkc.unbind = NULL;
        nkc.compare = NULL;
        nl_sk = netlink_kernel_create(&init_net, NETLINK_TEST, &nkc);
        if( !nl_sk ) {
                printk(KERN_ERR "[netlink] create netlink socket error!\n");
                goto err;
        }
 
        printk(KERN_ALERT "netlink init success!\n");
        return 0;
err:
        hello_cleanup();
        return -1;
}
 
static __exit void netlink_exit(void)
{
        hello_cleanup();
        printk(KERN_WARNING "netlink exit!\n");
}
 
module_init(netlink_init);
module_exit(netlink_exit);
 
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Stone");

应用层1：

#include <sys/stat.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/socket.h>
#include <string.h>
#include <asm/types.h>
#include <linux/netlink.h>
#include <linux/socket.h>
#include <errno.h>
 
#define NETLINK_TEST    (25)
#define MAX_PAYLOAD     (1024)
#define TEST_PID        (100)
 
int netlink_create_socket(void)
{
        //create a socket
        return socket(AF_NETLINK, SOCK_RAW, NETLINK_TEST);
}
 
int netlink_bind(int sock_fd)
{
        struct sockaddr_nl addr;
 
        memset(&addr, 0, sizeof(struct sockaddr_nl));
        addr.nl_family = AF_NETLINK;
        addr.nl_pid = TEST_PID;
        addr.nl_groups = 0;
 
        return bind(sock_fd, (struct sockaddr *)&addr, sizeof(struct sockaddr_nl));
}
 
int
netlink_send_message(int sock_fd, const unsigned char *message, int len,
                                        unsigned int pid, unsigned int group)
{
        struct nlmsghdr *nlh = NULL;
        struct sockaddr_nl dest_addr;
        struct iovec iov;
        struct msghdr msg;
 
        if( !message ) {
                return -1;
        }
 
        //create message
        nlh = (struct nlmsghdr *)malloc(NLMSG_SPACE(len));
        if( !nlh ) {
                perror("malloc");
                return -2;
        }
        nlh->nlmsg_len = NLMSG_SPACE(len);
        nlh->nlmsg_pid = TEST_PID;
        nlh->nlmsg_flags = 0;
        memcpy(NLMSG_DATA(nlh), message, len);
 
        iov.iov_base = (void *)nlh;
        iov.iov_len = nlh->nlmsg_len;
        memset(&dest_addr, 0, sizeof(struct sockaddr_nl));
        dest_addr.nl_family = AF_NETLINK;
        dest_addr.nl_pid = pid;
        dest_addr.nl_groups = group;
 
        memset(&msg, 0, sizeof(struct msghdr));
        msg.msg_name = (void *)&dest_addr;
        msg.msg_namelen = sizeof(struct sockaddr_nl);
        msg.msg_iov = &iov;
        msg.msg_iovlen = 1;
 
        //send message
        if( sendmsg(sock_fd, &msg, 0) < 0 )
        {
                printf("send error!\n");
                free(nlh);
                return -3;
        }
 
        free(nlh);
        return 0;
}
 
int
netlink_recv_message(int sock_fd, unsigned char *message, int *len)
{
        struct nlmsghdr *nlh = NULL;
        struct sockaddr_nl source_addr;
        struct iovec iov;
        struct msghdr msg;
 
        if( !message || !len ) {
                return -1;
        }
 
        //create message
        nlh = (struct nlmsghdr *)malloc(NLMSG_SPACE(MAX_PAYLOAD));
        if( !nlh ) {
                perror("malloc");
                return -2;
        }
        iov.iov_base = (void *)nlh;
        iov.iov_len = NLMSG_SPACE(MAX_PAYLOAD);
        memset(&source_addr, 0, sizeof(struct sockaddr_nl));
        memset(&msg, 0, sizeof(struct msghdr));
        msg.msg_name = (void *)&source_addr;
        msg.msg_namelen = sizeof(struct sockaddr_nl);
        msg.msg_iov = &iov;
        msg.msg_iovlen = 1;
 
        if ( recvmsg(sock_fd, &msg, 0) < 0 ) {
                printf("recvmsg error!\n");
                return -3;
        }
        *len = nlh->nlmsg_len - NLMSG_SPACE(0);
        memcpy(message, (unsigned char *)NLMSG_DATA(nlh), *len);
 
        free(nlh);
        return 0;
}
 
int
main(int argc, char **argv)
{
        int sock_fd;
        char buf[MAX_PAYLOAD];
        int len;
 
        if( argc < 2) {
                printf("enter message!\n");
                exit(EXIT_FAILURE);
        }
 
        sock_fd = netlink_create_socket();
        if(sock_fd == -1) {
                printf("socket error!\n");
                return -1;
        }
 
        if( netlink_bind(sock_fd) < 0 ) {
                perror("bind");
                close(sock_fd);
                exit(EXIT_FAILURE);
        }
 
        netlink_send_message(sock_fd, argv[1], strlen(argv[1]) + 1, 0, 0);
        if( netlink_recv_message(sock_fd, buf, &len) == 0 ) {
                printf("recv:%s len:%d\n", buf, len);
        }
 
        close(sock_fd);
        return 0;
}

上面例子讲的是使用sendmsg、recvmsg。在应用层我们同样可以使用sendto、recvfrom发送接收数据，操作模式和UDP通信非常相似，区别是为了能成功接收数据，我们同样需要使用bind()绑定自身地址，但对于UDP这不是必须的；

#include <sys/stat.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/socket.h>
#include <string.h>
#include <asm/types.h>
#include <linux/netlink.h>
#include <linux/socket.h>
#include <errno.h>
 
#define NETLINK_TEST    (25)
#define MAX_PAYLOAD     (1024)
#define TEST_PID        (100)
 
int netlink_create_socket(void)
{
        //create a socket
        return socket(AF_NETLINK, SOCK_RAW, NETLINK_TEST);
}
 
int netlink_bind(int sock_fd)
{
        struct sockaddr_nl addr;
 
        memset(&addr, 0, sizeof(struct sockaddr_nl));
        addr.nl_family = AF_NETLINK;
        addr.nl_pid = TEST_PID;
        addr.nl_groups = 0;
 
        return bind(sock_fd, (struct sockaddr *)&addr, sizeof(struct sockaddr_nl));
}
 
int
netlink_send_message(int sock_fd, const unsigned char *message, int len,
                                        unsigned int pid, unsigned int group)
{
        struct nlmsghdr *nlh = NULL;
        struct sockaddr_nl dest_addr;
 
        if( !message ) {
                return -1;
        }
 
        //create message
        nlh = (struct nlmsghdr *)malloc(NLMSG_SPACE(len));
        if( !nlh ) {
                perror("malloc");
                return -2;
        }
        nlh->nlmsg_len = NLMSG_SPACE(len);
        nlh->nlmsg_pid = TEST_PID;
        nlh->nlmsg_flags = 0;
        memcpy(NLMSG_DATA(nlh), message, len);
 
        memset(&dest_addr, 0, sizeof(struct sockaddr_nl));
        dest_addr.nl_family = AF_NETLINK;
        dest_addr.nl_pid = pid;
        dest_addr.nl_groups = group;
 
        //send message
        if( sendto(sock_fd, nlh, nlh->nlmsg_len, 0, (struct sockaddr *)&dest_addr, sizeof(struct sockaddr_nl)) != nlh->nlmsg_len ) {
                printf("send error!\n");
                free(nlh);
                return -3;
        }
 
        free(nlh);
        return 0;
}
 
int
netlink_recv_message(int sock_fd, unsigned char *message, int *len)
{
        struct nlmsghdr *nlh = NULL;
        struct sockaddr_nl src_addr;
        socklen_t addrlen = sizeof(struct sockaddr_nl);
 
        if( !message || !len ) {
                return -1;
        }
 
        //create message
        nlh = (struct nlmsghdr *)malloc(NLMSG_SPACE(MAX_PAYLOAD));
        if( !nlh ) {
                perror("malloc");
                return -2;
        }
        memset(&src_addr, 0, sizeof(struct sockaddr_nl));
        if( recvfrom(sock_fd, nlh, NLMSG_SPACE(MAX_PAYLOAD), 0, (struct sockaddr *)&src_addr, (socklen_t *)&addrlen) < 0 ) {
                printf("recvmsg error!\n");
                return -3;
        }
        *len = nlh->nlmsg_len - NLMSG_SPACE(0);
        memcpy(message, (unsigned char *)NLMSG_DATA(nlh), *len);
 
        free(nlh);
        return 0;
}
 
int
main(int argc, char **argv)
{
        int sock_fd;
        char buf[MAX_PAYLOAD];
        int len;
 
        if( argc < 2) {
                printf("enter message!\n");
                exit(EXIT_FAILURE);
        }
 
        sock_fd = netlink_create_socket();
        if(sock_fd == -1) {
                printf("socket error!\n");
                return -1;
        }
 
        if( netlink_bind(sock_fd) < 0 ) {
                perror("bind");
                close(sock_fd);
                exit(EXIT_FAILURE);
        }
 
        netlink_send_message(sock_fd, argv[1], strlen(argv[1]) + 1, 0, 0);
        if( netlink_recv_message(sock_fd, buf, &len) == 0 ) {
                printf("recv:%s len:%d\n", buf, len);
        }
 
        close(sock_fd);
        return 0;
}

猜你喜欢

转载自blog.csdn.net/weixin_43836778/article/details/91385540
今日推荐
《美国对全球网络空间安全与发展的威胁和破坏》报告发布
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
LFOSSA 源来如此公开课 | 掌握云原生未来：CNCF 认证全面攻略与备考秘籍
周排行
循环神经网络（rnn）讲解
Tigao教程四：单独的关节运动
金蝶K3WISE15.0-注册套打教程
如何在Mac上配置Kubernetes
Android应用结束自身进程的方法
SpringMVC学习 十三 拦截器栈
中国驻洛杉矶总领馆举行新春招待会
HttpClient get post 发送
11 - three.js 笔记 - 绘制三维字体模型
Mysql递归获取某个父节点下面的所有子节点和子节点上的所有父节点
每日归档
更多
2024-05-01(4)
2024-04-30(1)
2024-04-29(40)
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)
2024-04-23(26)
2024-04-22(39)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022