1.安装keepalived（在两台调度服务器上安装）
vim /etc/yum.repo.d/rhel.repo
[local-cdrom]
name=local from cdrom
baseurl=file:///mnt/
enable=1
gpgcheck=0
yum -y install kernel-devel openssl-devel popt-devel
rpm -ivh /mnt/Packgets/ipvsadm-1.25-9.el6.i686.rpm
tar zxvf keepalived-1.2.2.tar.gz -C /usr/src/
cd /usr/src/keepalived-1.2.2/
./configure --prefix=/ --with-kernel-dir=/usr/src/kernels/2.6.32-131.0.15.el6.i686
make &&make install
chkconfig --add keepalived
chkconfig keepalived on
2.配置调度器（主：192.168.13.95，备：192.168.13.96，漂移ip：192.168.13.100）web服务器池（节点1:192.168.13.41、节点2:192.168.13.47）
1）、配置主HA调度服务器
cd /etc/keepalived/
cp keepalived.conf keepalived.conf.bak
vi /etc/keepalived/keepalived.conf
#################全局配置#################33
global_defs {
router_id LVS_HA_R1
}
##################高可用HA的设置##############
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_route_id 1
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 123123
}
virtual_ipaddress {
192.168.13.100
}
}
###################服务器池的配置######################
virtual_server 192.168.13.100 80 {
delay_loop 15
lb_algo rr
lb_kind DR
protocol TCP
real_server 192.168.13.41 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 4
}
}
real_server 192.168.13.41 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 4
}
}
}
modprobe ip_vs
lsmod |grep ip_vs
echo "modprobe ip_vs" >>/etc/rc.local
/etc/init.d/keepalived restart
chkconfig ipvsadm off
ip addr show dev eth0
2）、配置HA从调度服务器
cd /etc/keepalived/
cp keepalived.conf keepalived.conf.bak
vi /etc/keepalived/keepalived.conf
#################全局配置#################33
global_defs {
router_id LVS_HA_R2
}
##################高可用HA的设置##############
vrrp_instance VI_1 {
state SLAVE
interface eth0
virtual_route_id 1
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 123123
}
virtual_ipaddress {
192.168.13.100
}
}
###################服务器池的配置######################
virtual_server 192.168.13.100 80 {
delay_loop 15
lb_algo rr
lb_kind DR
protocol TCP
real_server 192.168.13.41 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 4
}
}
real_server 192.168.13.47 80 {
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 4
}
}
}
modprobe ip_vs
lsmod |grep ip_vs
echo "modprobe ip_vs" >>/etc/rc.local
/etc/init.d/keepalived restart
chkconfig ipvsadm off
ip addr show dev eth0
######设置防火墙和selinux（此处为测试）#########
iptables -F
setenforce 0
3.配置Web节点服务器（DR工作模式的配置，分别在节点服务器上做如下设置）
cd /etc/sysconfig/network-script/
cp ifcfg-lo ifcfg-lo:0
vi ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.13.100
NETMASK=255.255.255.255
ONBOOT=yes
echo "route add -host 192.168.13.100 dev lo:0" >>/etc/rc.local
route add -host 192.168.13.100 dev lo:0
ip addr show dev lo
vi /etc/sysctl.conf
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_ignore = 1
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
sysctl -p
yum install -y httpd
vi /var/www/html/index.html
test page!!!!
/etc/init.d/httpd start
chkconfig httpd on
iptables -F
setenforce 0
4.测试lvs+Keepalived高可用集群
在客户机浏览器访问192.168.13.100，调度服务器可用坏一个，节点服务器至少要有一个是好的。
通过/var/log/message日志文件，跟踪故障切换过程。使用ipvsadm -Ln查看LVS。