NETCONF配置CISCO XE（csr1000v）初体验

1、有用的链接

Model Driven Network Automation with IOS-XE

https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2018/pdf/LTRCRT-2700.pdf

Configure NETCONF/YANG and Validate Example for Cisco IOS XE 16.x Platforms

https://www.cisco.com/c/en/us/support/docs/storage-networking/management/200933-YANG-NETCONF-Configuration-Validation.html

Programmability Configuration Guide, Cisco IOS XE Everest 16.6.x

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/configuring_yang_datamodel.html

扫描二维码关注公众号，回复： 6814776 查看本文章

yang-explorer

https://github.com/CiscoDevNet/yang-explorer

YangModels

https://github.com/YangModels

2、安装yang-explorer

准备：

MAC、Linux（不支持windows)

python 2.7

pip软件管理器

浏览器带flash plugin（推荐chrome）

//pip install --upgrade pip

//yum install python-virtualenv

//yum install graphviz

a、更改pip源

mkdir ~/.pip

vi ~/.pip/pip.conf

[global]

index-url = https://pypi.tuna.tsinghua.edu.cn/simple

[install]

trusted-host = mirrors.aliyun.com

yum install python2-pip python-virtualenv graphviz -y

依赖组件：

yum install libxml2-devel libxslt-devel python-devel zlib-devel gcc git -y

git clone https://github.com/CiscoDevNet/yang-explorer.git

b、安装

cd yang-explorer/

bash setup.sh

省略。。。。。。。

Successfully built ydk-models-cisco-ios-xr

Installing collected packages: ydk-models-cisco-ios-xr

Successfully installed ydk-models-cisco-ios-xr-6.2.1

Installing dependencies .. done

Setting up initial database ..

Warning: Setting up database as root, this is not recommended.

Alternatively you can re-run this script as non-root

to setup database without root privilege.

Do you want to continue as root ? (n/N) y //初始化数据库

Creating data directories ..

Creating database ..

Operations to perform:

Synchronize unmigrated apps: staticfiles, messages, explorer

Apply all migrations: admin, contenttypes, auth, sessions

Synchronizing apps without migrations:

Creating tables...

Creating table explorer_collection

Creating table explorer_userprofile

Creating table explorer_deviceprofile

Running deferred SQL...

Installing custom SQL...

Running migrations:

Rendering model states... DONE

Applying contenttypes.0001_initial... OK

Applying auth.0001_initial... OK

Applying admin.0001_initial... OK

Applying contenttypes.0002_remove_content_type_name... OK

Applying auth.0002_alter_permission_name_max_length... OK

Applying auth.0003_alter_user_email_max_length... OK

Applying auth.0004_alter_user_username_opts... OK

Applying auth.0005_alter_user_last_login_null... OK

Applying auth.0006_require_contenttypes_0002... OK

Applying sessions.0001_initial... OK

Creating default users ..

Copying default models ..

Setup completed..

Use start.sh to start yang-explorer server

安装完成。

c、修改配置文件并运行yang-exporer

[root@desk yang-explorer]# cd server/static/

[root@desk static]# vi YangExplorer.html

var swfVersionStr = "16.0.0";

// To use express install, set to playerProductInstall.swf, otherwise the empty string.

var xiSwfUrlStr = "expressInstall.swf";

var flashvars = {};

flashvars.host = '192.168.0.87'; //修改监听地址和端口

flashvars.port = '8088';

[root@desk static]# cd ..

[root@desk server]# cd ..

[root@desk yang-explorer]# vi start.sh

#!/usr/bin/env bash

HOST='192.168.0.87'

PORT='8088'

# set timeout value for ncclient

export NCCLIENT_TIMEOUT=90

[root@desk yang-explorer]# ls

default-models docs env.sh LICENSE README.md requirements.txt server setup.sh start.sh v YangExplorer

[root@desk yang-explorer]# ./start.sh

Activating virtualenv ..

Starting YangExplorer server ..

Use http://192.168.0.87:8088/static/YangExplorer.html

Performing system checks...

System check identified no issues (0 silenced).

July 17, 2019 - 15:22:46

Django version 1.8.3, using settings 'server.settings'

Starting development server at http://192.168.0.87:8088/

Quit the server with CONTROL-C.

打开浏览器：

http://192.168.0.87:8088/static/YangExplorer.html

3、导入YangModels

点击Login

username：guest

password：guess

Subscript

4、配置XE路由器

XE3(config)#netconf-yang //主要配置

Cisco-IOS-XE-native----->native --->interface --->GigabitEthernet name

ip---->address-choice

<rpc-reply message-id="urn:uuid:79b79a13-844a-4248-aac5-c47401b15745" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

检查

XE3#sh ip inter b

Interface IP-Address OK? Method Status Protocol

GigabitEthernet1 192.168.0.29 YES DHCP up up

GigabitEthernet2 10.1.1.1 YES other administratively down down

GigabitEthernet3 unassigned YES unset administratively down down

XE3#sh ip inter b

Interface IP-Address OK? Method Status Protocol

GigabitEthernet1 192.168.0.29 YES DHCP up up

GigabitEthernet2 10.1.1.1 YES other up up

GigabitEthernet3 unassigned YES unset administratively down down

产生python文件：

"""

Netconf python example by yang-explorer (https://github.com/CiscoDevNet/yang-explorer)

Installing python dependencies:

> pip install lxml ncclient

Running script: (save as example.py)

> python example.py -a 192.168.0.29 -u yoyoo -p yoyoo123 --port 830 //执行python的方法

"""

import lxml.etree as ET

from argparse import ArgumentParser

from ncclient import manager

from ncclient.operations import RPCError

payload = """

<ip>

</primary>

</address>

</ip>

</GigabitEthernet>

</interface>

</native>

</config>

"""

if __name__ == '__main__':

parser = ArgumentParser(description='Usage:')

# script arguments

parser.add_argument('-a', '--host', type=str, required=True,

help="Device IP address or Hostname")

parser.add_argument('-u', '--username', type=str, required=True,

help="Device Username (netconf agent username)")

parser.add_argument('-p', '--password', type=str, required=True,

help="Device Password (netconf agent password)")

parser.add_argument('--port', type=int, default=830,

help="Netconf agent port")

args = parser.parse_args()

# connect to netconf agent

with manager.connect(host=args.host,

port=args.port,

username=args.username,

password=args.password,

timeout=90,

hostkey_verify=False,

device_params={'name': 'csr'}) as m:

# execute netconf operation

try:

response = m.edit_config(target='running', config=payload).xml

data = ET.fromstring(response)

except RPCError as e:

data = e._raw

# beautify output

print(ET.tostring(data, pretty_print=True))

NETCONF配置CISCO XE（csr1000v）初体验

猜你喜欢