一：实验目的
（一）案例目的
（二）实验内容
（三）网络拓扑结构
二：OpenFlow流表实验准备
（一）使用Python设置网络拓扑 --- tree_topo.py
from mininet.topo import Topo from mininet.net import Mininet from mininet.node import RemoteController from mininet.link import TCLink from mininet.util import dumpNodeConnections class MyTopo(Topo): def __init__(self): super(MyTopo,self).__init__() # add host Host1 = self.addHost('h1') Host2 = self.addHost('h2') Host3 = self.addHost('h3') switch1 = self.addSwitch('s1') switch2 = self.addSwitch('s2') self.addLink(Host1,switch1) self.addLink(Host2,switch1) self.addLink(Host3,switch2) self.addLink(switch1,switch2) topos = {"mytopo":(lambda:MyTopo())}
（二）启动远程Ryu控制器
ryu-manager simple_switch.py 注意，该控制器py文件在app目录下
# Copyright (C) 2011 Nippon Telegraph and Telephone Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or # implied. # See the License for the specific language governing permissions and # limitations under the License. """ An OpenFlow 1.0 L2 learning switch implementation. """ from ryu.base import app_manager from ryu.controller import ofp_event from ryu.controller.handler import MAIN_DISPATCHER from ryu.controller.handler import set_ev_cls from ryu.ofproto import ofproto_v1_0 from ryu.lib.mac import haddr_to_bin from ryu.lib.packet import packet from ryu.lib.packet import ethernet from ryu.lib.packet import ether_types class SimpleSwitch(app_manager.RyuApp): 不同与之前的Ryu实验，这里面没有在交换机初始连接时下发默认流表...待思考 OFP_VERSIONS = [ofproto_v1_0.OFP_VERSION] def __init__(self, *args, **kwargs): super(SimpleSwitch, self).__init__(*args, **kwargs) self.mac_to_port = {} def add_flow(self, datapath, in_port, dst, src, actions): 下发流表 ofproto = datapath.ofproto match = datapath.ofproto_parser.OFPMatch( in_port=in_port, dl_dst=haddr_to_bin(dst), dl_src=haddr_to_bin(src)) mod = datapath.ofproto_parser.OFPFlowMod( datapath=datapath, match=match, cookie=0, command=ofproto.OFPFC_ADD, idle_timeout=0, hard_timeout=0, priority=ofproto.OFP_DEFAULT_PRIORITY, flags=ofproto.OFPFF_SEND_FLOW_REM, actions=actions) datapath.send_msg(mod) @set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER) def _packet_in_handler(self, ev): 交换机向控制器发送数据 msg = ev.msg datapath = msg.datapath ofproto = datapath.ofproto pkt = packet.Packet(msg.data) eth = pkt.get_protocol(ethernet.ethernet) if eth.ethertype == ether_types.ETH_TYPE_LLDP: # ignore lldp packet return dst = eth.dst src = eth.src dpid = datapath.id self.mac_to_port.setdefault(dpid, {}) self.logger.info("packet in %s %s %s %s", dpid, src, dst, msg.in_port) # learn a mac address to avoid FLOOD next time. self.mac_to_port[dpid][src] = msg.in_port if dst in self.mac_to_port[dpid]: out_port = self.mac_to_port[dpid][dst] else: out_port = ofproto.OFPP_FLOOD actions = [datapath.ofproto_parser.OFPActionOutput(out_port)] # install a flow to avoid packet_in next time if out_port != ofproto.OFPP_FLOOD: self.add_flow(datapath, msg.in_port, dst, src, actions) data = None if msg.buffer_id == ofproto.OFP_NO_BUFFER: data = msg.data out = datapath.ofproto_parser.OFPPacketOut( datapath=datapath, buffer_id=msg.buffer_id, in_port=msg.in_port, actions=actions, data=data) datapath.send_msg(out) @set_ev_cls(ofp_event.EventOFPPortStatus, MAIN_DISPATCHER) def _port_status_handler(self, ev): msg = ev.msg reason = msg.reason port_no = msg.desc.port_no ofproto = msg.datapath.ofproto if reason == ofproto.OFPPR_ADD: self.logger.info("port added %s", port_no) elif reason == ofproto.OFPPR_DELETE: self.logger.info("port deleted %s", port_no) elif reason == ofproto.OFPPR_MODIFY: self.logger.info("port modified %s", port_no) else: self.logger.info("Illeagal port state %s %s", port_no, reason)
（三）Mininet开始启动网络拓扑
sudo mn --custom tree_topt.py --topo=mytopo --controller=remote,ip=127.0.0.1,port=6633
注意：应该是主机连接发送了数据，导致控制器对网络进行了拓扑收集，问题同上：SDN实验---Ryu的应用开发（二）Learning Switch
三：进行OpenFlow流表分析
（一）主要流表操作命令
dpctl dump-flows 查看静态流表
dpctl del-flows 删除所有交换机中的流表
dpctl add-flow in_port=1,actions=output:2 添加流表项到所有交换机，注意：一般是成对添加，实现双方通信
sh ovs-ofctl del-flows s1 in_port=2 删除指定交换机的，匹配in_port=2的流表
dpctl del-flows in_port=1 删除所有交换机中符合in_port=1的流表
dpctl add-flow in_port=2,actions=drop 添加丢弃数据包的流表项
扫描二维码关注公众号，回复：
7661512 查看本文章
（二）先解决上面问题，是不是启动Mininet后进行了数据包发送，导致控制器下发流表
重新启动Ryu和Mininet，直接查看交换机中是否有流表.
1.先启动交换机，查看流表，为空
2.启动控制器，之后再查看交换机中流表信息，依旧为空
3.主机使用pingall命令后，查看流表，发生变化
已解决。但是交换机是如何设置默认流表当不知道packet如何处理的时候发生给控制器？如果这是默认动作，那么我们之前Ryu实验中为何要实现
@set_ev_cls(ofp_event.EventOFPSwitchFeatures,CONFIG_DISPATCHER)
def switch_features_handler(self,ev): ？？？？？
注意从（三）开始的实验我们需要关闭控制器Ryu进行
（三）删除所有流表
由于没有流表，所有ping操作不可达
（四）添加h1与和h2之间的流表转发
1.单个交换机操作
2.h1 ping h2,信息可达（因为有流表进行指导）
3.h1 ping h3,消息不可达（因为交换机2中没有流表项，并且交换机1也没有配置到port3的动作
4.实现所有网络所有主机互通（先清空流表）
为所有交换机添加端口1和端口2的操作---两个交换机公共操作
dpctl add-flow in_port=1,actions=output:2
dpctl add-flow in_port=2,actions=output:1
为交换机之间端口提供交互---只操作s1(因为只有s1有端口3)
sh ovs-ofctl add-flow s1 in_port=1,actions=output:2,3
sh ovs-ofctl add-flow s1 in_port=3,actions=output:1,2
sh ovs-ofctl add-flow s1 in_port=2,actions=output:1,3
实验结果显示
或者：我们直接添加下面流表也可以实现上面操作
mininet> dpctl add-flow in_port=1,actions=output:2,3 mininet> dpctl add-flow in_port=2,actions=output:1,3 mininet> dpctl add-flow in_port=3,actions=output:1,2
5.为交换机2添加丢弃流表，使得两个交换机不可通信（在前面互通基础上实现）
mininet> sh ovs-ofctl del-flows s2 in_port=1 删除原有流表 mininet> sh ovs-ofctl add-flow s2 in_port=1,actions=drop 添加丢弃流表
