怎样登陆OLT的串口?
安装octopus
DOStopus -p udp -n 172.17.14.236 -i 其中"172.17.14.236"是FX OAM的IP地址
user:shell
password:nt
怎样创建clearcase的view
cleartool mkview –stgloc default -tag xxx
cleartool setview xxx
cleartool edcs
修改config_spec以后,在/view路径可以看到自己的view
怎样build package
vi /vobs/gpon/sw/bcm963xx/targets/fs.src/etc/sw_version 更新版本号,需要check out
cd /vobs/gpon/sw/cpe/build
make BUILD=TARGET_GMGNCBdo
怎样download包到OLT
登陆串口以后,运行tapi enable write /ONT, 打开/ONT的写权限
把build好的包通过tftp传到FX上
在windows cmd窗口:tftp -i 135.251.197.162 put c:\workspace\TWDMPON007 /ONT/TWDMPON007 注意tftp client已经开启
在串口上 cd /ONT; dir看一下是否有要下载的文件
OLT下载文件到ONU
configure equipment ont interface 1/1/3/2/1 sw-ver-pland TWDMPON007
下载完成后ONU后自动重启
通过串口或者网口更新ONU的软件
在ONU启动后,会有一个3S的autoboot中断时间,输入:SUGAR2A041,进入CFE界面
如果要通过网口,启动TFTP Server,然后在CFE中输入: f verion_number,然后TFTP下载就会开始。更新完成后,ONU会重新启动
如果是串口,在CFE中输入:f xmodem,然后使用超级终端或SecureCRT,通过xmodem把文件发送过去
OLT上的debug命令
eqpt displayasm:显示7360的板卡信息
login board 1105:登陆到1105板卡
dbg spo module on:打开debug
dbg spt -l 0 -m LTP:打开LTP的trace
ltp:进入ltp
1 log mode absoulte:显示绝对的行号
1 log dispcnt 200
1 log g 9999: goto line 9999
1 log f xx
1 log b xx: forward/backward