[Linux]CentOS与终端破墙

来源：https://www.zybuluo.com/ncepuwanghui/note/954160

参考：https://blog.huihut.com/2017/08/25/LinuxInstallConfigShadowsocksClient/

亲测在CentOS-7-x86_64-DVD-1804.iso（KDE）上安装成功

一、安装shadowsocks

安装epel扩展源
采用Python包管理工pip安装

sudo yum -y install epel-release
sudo yum -y install python-pip

由于安装shadowsocks时提示需要jiaja2和pyudev，dnspython的版本要求，所以安装和更新

ipaclient 4.5.4 requires jinja2, which is not installed.
rtslib-fb 2.1.63 has requirement pyudev>=0.16.1, but you'll have pyudev 0.15 which is incompatible.
ipapython 4.5.4 has requirement dnspython>=1.15, but you'll have dnspython 1.12.0 which is incompatible.

安装jiaja2

sudo yum -y install python-jinja2

更新pyudev

git clone https://github.com/lunaryorn/pyudev.git
cd pyudev
sudo python setup.py install

更新dnspython

wget http://www.dnspython.org/kits/1.15.0/dnspython-1.15.0.tar.gz
tar -zxvf dnspython-1.15.0.tar.gz
cd dnspython-1.15.0
sudo python setup.py install

 安装shadowsocks

sudo pip install shadowsocks

如果出现此提示，则按提示更新pip

You are using pip version 8.1.2, however version 10.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.

更新

sudo pip install --upgrade pip

二、配置Shadowsocks

新建设置文件

sudo vi /etc/shadowsocks.json

{
    "local_address": "127.0.0.1",
    "local_port":1080,
    "server":"服务器IP",
    "server_port":服务器端口,
    "password":"服务器密码",
    "timeout":300,
    "method":"aes-256-cfb",
    "fast_open": false,
    "workers": 1
}

2.新建自启动脚本，设置后开机可以自启动（注意路径）

sudo vi /etc/systemd/system/shadowsocks.service

[Unit]
Description=Shadowsocks
[Service]
TimeoutStartSec=0
ExecStart=/usr/bin/sslocal -c /etc/shadowsocks.json
[Install]
WantedBy=multi-user.target

3.启动

systemctl enable shadowsocks.service
systemctl start shadowsocks.service
systemctl status shadowsocks.service

4.测试，成功时返回shadowsocks的设置IP

curl --socks5 127.0.0.1:1080 http://httpbin.org/ip

三、配置火狐

 下载安装FoxyProxy Standard

配置FoxyProxy，填写IP和端口，选择socks5，保存

启用代理

测试

四、安装配置Privoxy

sudo yum -y install privoxy

启动Privoxy

systemctl enable privoxy
systemctl start privoxy
systemctl status privoxy

配置Privoxy（文本较长，建议其他文本编辑器查找）

sudo vi /etc/privoxy/config

确保如下内容没有被注释掉

listen-address 127.0.0.1:8118    #8118是默认端口，不用改
forward-socks5t / 127.0.0.1:1080 .    #转发到本地端口

添加代理

sudo vi /etc/profile

export http_proxy=http://127.0.0.1:8118
export https_proxy=http://127.0.0.1:8118

source /etc/profile

测试

curl www.google.com