Nginx服务、主配置文件、web服务的监听、访问统计、Nginx虚拟主机
一、nginx
1.1 nginx是一款高性能、轻量级Web服务软件
稳定性高
系统资源消耗低
对HTTP并发连接的处理能力高
单台物理服务器可支持30000~50000个并发请求
二、编译安装nginx服务
1、关闭防火墙,将安装nginx所需要的软件包拖到/opt目录下
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
nginx-1.12.0.tar.gz nginx-1.12.2.tar.gz
2、安装依赖包
nginx的配置及运行需要pcre、zlib等软件包的支持,因此需要安装这些开发包,以便提供相应的库和头文件
yum -y install pcre-devel zlib-devel gcc gcc-c++ make
3、创建运行用户、组(nginx服务程序默认以nobody身份运行,建议为其下创建专门的用户账号,以便更准确的控制访问权限)
useradd -M -s /sbin/nologin nginx
4、编译安装nginx
cd /opt
tar zxvf nginx-1.12.0.tar.gz -C /opt/
cd nginx-1.12.0/
./configure \
--prefix=/usr/local/nginx \ 指定nginx的安装路径
--user=nginx \ 指定用户名
--group=nginx \ 指定组名
--with-http_stub_status_module 启用http_stub_status_module模块以支持状态统计
make && make install
ln -s /usr/local/nginx/sbin/nginx /usr/local/sbin 让系统识别nginx的操作命令
5、检查、启动、重启、停止、nginx服务
nginx -t 检查配置文件是否配置正确
nginx 启动
cat /usr/local/nginx/logs/nginx.pid 查看nginx的PID号
kill -3 <PID号> 停止
kill -3 -s QUIT <PID号>
killall -3 nginx
killall -3 -s QUIT nginx
kill -l <PID号> 重载
kill -s HUP <PID号>
killall -l nginx
killall -s HUP nginx
日志分隔,重新打开日志文件
kill -USR1 <PID号>
平滑升级
kill -USR2 <PID号>
6、添加nginx系统服务
方法一:
vim /etc/init.d/nginx
#!/bin/bash
#chkconfig: - 99 20
#description:Nginx Service Control Script
COM="/usr/local/nginx/sbin/nginx"
PID="/usr/local/nginx/logs/nginx.pid"
case "$1" in
start)
$COM
;;
STOP)
kill -s QUIT $(cat $PID)
;;
restart)
$0 stop
$0 start
;;
reload)
kill -s HUP $(cat $PID)
;;
*)
echo “Usage: $0 {
start|stop|restart|reload}”
exit 1
esac
exit 0
chmod +x /etc/init.d/nginx
chkconfig --add nginx 添加为系统服务
systemctl stop nginx
systemctl start nginx
方法二:
vim /lib/systend/system/nginx.service
[Unit]
Description=nginx
After=network.target
[Service]
Type=forking
PIDFile=/usr/local/nginx/logs/nginx.pid
ExecStart=/usr/local/nginx/sbin/nginx
ExecrReload=/bin/kill -s HUP $MAINPID
ExecrStop=/bin/kill -s QUIT $MAINPID
PrivateTmp=true
[Install]
WantedBy=multi-user.target
chmod 754 /lib/systemd/system/nginx.service
systemctl start nginx.service
systemctl enable nginx.service
二、认识Nginx服务的主配置文件nginx.conf
vim /usr/local/nginx/conf/nginx.conf
1、全局配置
#user nobody; 运行用户,若编译时未指定则默认为nobody
worker_processes 1;
工作进程数量,可配置成服务器内核数* 2,如果网站访问量不大,一般设为1就够用了
#error_log logs/error.log; 错误日志文件的位置
#pid logs/nginx.pid; PID文件的位置
2、I/0事件配置
events {
use epoll;
使用epoll模型, 2.6及以上版本的系统内核,建议使用epoll模型以提高性能
worker_connections 4096; 每个进程处理4096个连接
}
如提高每个进程的连接数还需执行"ulimit -n 65535"命令临时修改本地每个进程可以同时打开的最大文件数。
在Linux平台上,在进行高并发TCP连接处理时,最高的并发数量都要受到系统对用户单一进程同时可打开文件数量的限制(这是因为系统为每个TCP连接都要创建一个socket句柄,每个socket句柄同时也是一个文件句柄)。
可使用"ulimit -a"命令查看系统允许当前用户进程打开的文件数限制。
3、HTTP配置
http {
文件扩展名与文件类型映射表
include mime.types;
默认文件类型
default_type application/octet-stream;
日志格式设定
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for" ';
访问日志位置
#access_log logs/access.log main;
支持文件发送(下载)
sendfile on;
此选项允许或禁止使用socket的TCP_CORK的选项(发送数据包前先缓存数据) ,此选项仅在使用sendfile的时候使用
#tcp_nopush on;
连接保持超时时间,单位是秒
#keepalive_timeout 0;
keepalive_timeout 65;
gzip模块设置,设置是否开启gzip压缩输出
gzip on;
三、Web服务的监听配置
server {
监听地址及端口
listen 80;
站点域名,可以有多个,用空格隔开
server name www.xyw.com;
网页的默认字符集
charset utf-8;
根目录配置
location / {
网站根目录的位置/usr/local/nginx/html
root html;
默认首页文件名
index index.html index.php;
内部错误的反馈页面
error_page 500 502 503 504 /50x.html;
错误页面配置
location = /50x.html {
root html;
}
}
}
日志格式设定
$remote_addr与$http_x_forwarded_for用以记录客户端的ip地址;
$remote_user:用来记录客户端用户名称;
$time_local:用来记录访问时间与时区;
$request:用来记录请求的url与http协议;
$status:用来记录请求状态;成功是200;
$body_bytes_sent:记录发送给客户端文件主体内容大小;
$http_referer:用来记录从哪个页面链接访问过来的;
$http_user_agent:记录客户浏览器的相关信息;
通常web服务器放在反向代理的后面,这样就不能获取到客户的IP地址了,通过$remote_add拿到的IP地址是反向代理服务器的iP地址。反向代理服务器在转发请求的http头信息中,可以增加x_forwarded_for信息,用以记录原有客户端的IP地址和原来客户端的请求的服务器地址。
location常见配置指令
root、alias、 proxy_pass
root (根路径配置):请求www.xyw.com/test/1. jpg,会返回文件/usr/local/nginx/html/test/1.jpg
alias (别名配置):请求www.xyw.com/test/1.jpg,会返回文件/usr/local/nginx/html/1.jpg
proxy_pass (反向代理配置):
proxy_pass http://127.0.0.1:8080/; 会转发请求到http://127.0.0.1:8080/1.jpg
proxy_pass http://127.0.0.1:8080; 会转发请求到http://127.0.0.1:8080/test/1.jpg
四、访问状态统计配置
1、先使用命令/usr/local/nginx/sbin/nginx -V 查看已安装的 Nginx 是否包含 HTTP_STUB_STATUS模块
2、修改nginx.conf配置文件,指定访问位置并添加stub status配置
cd /usr/local/nginx/conf
cp nginx.conf nginx.conf.bak
vim /usr/local/nginx/conf/nginx.conf
......
http {
.....
server {
listen 80;
server_name www.xyw.com
charset utf-8;
location / {
root html;
index index.html index.php;
}
添加stub_status配置
location /status {
访问位置为/status
stub_status on; 打开状态统计功能
access_log off; 关闭此位置的日志记录
}
}
}
3、重启服务,,访问测试
systemctl restart nginx
浏览器访问
http://192.168.238.20/status
Active connections:表示当前的活动连接数;
server accepts handled requests:表示已经处理的连接信息,三个数字依次表示已处理的连接数、成功的TCP握手次数、已处理的请求数。
五、基于授权的访问控制
1、生成用户密码认证文件
yum install -y httpd-tools
htpasswd -c /usr/local/nginx/passwd.db zhangsan
chown nginx /usr/local/nginx/passwd.db
chmod 400 /usr/local/nginx/passwd.db
2、修改主配置文件相对应目录,添加认证配置项
vim /usr/local/nginx/conf/nginx.conf
......
server {
location / {
......
添加认证配置
auth_basic "secret";
auth_basic_user_file /usr/local/nginx/passwd.db;
}
}
3、重启服务,访问测试
nginx -t
systemctl restart nginx
浏览器访问
http://192.168.238.20
六、基于客户端的访问控制
访问控制规则如下
deny IP/IP段:拒绝某个IP或IP段的客户端访问。
allow IP/IP段:允许某个IP或IP段的客户端访问。
规则从上往下执行,如匹配则停止,不再往下匹配。
vim /usr/local/nginx/conf/nginx.conf
.......
server {
location / {
......
添加控制规则
deny 192.168.238.200; 拒绝访问的客户端IP
allow all; 允许其它IP客户端访问
}
}
systemctl restart nginx
七、基于域名的nginx虚拟主机
1、为虚拟主机提供域名解析
echo "192.168.238.20 www.xyw.com www.benet.com" >> /etc/hosts
2、为虚拟主机准备网页文档
mkdir -p /var/www/html/benet
mkdir -p /var/www/html/xyw
echo "<h1>www.xyw.com<h1>" > /var/www/html/xyw/index.html
echo "<h1>www.benet.com<h1>" > /var/www/html/benet/index.html
3、修改Nginx的配置文件
vim /usr/local/nginx/conf/nginx.conf
.......
http {
......
server {
listen 80;
server_name www.xyw.com; 设置域名www.xyw.com
charset utf-8;
access_log logs/www.xyw.access.log; 设置日志名
location / {
root /var/www/html/xyw; 设置www.xyw.com的工作目录
index index.html index.php
}
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root html;
}
}
server {
listen 80;
server_name www.benet.com; 设置域名www.benet.com
charset utf-8;
access_log logs/www.benet.access.log;
location / {
root /var/www/html/benet;
index index.html index.php;
}
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root html;
}
}
}
systemctl restart nginx
浏览器访问
http://www.xyw.com
http://www.benet.com
八、基于IP的nginx虚拟主机
ifconfig ens33:0 192.168.238.100 netmask 255.255.255.0
vim /usr/local/nginx/conf/nginx.conf
.......
http {
......
server {
listen 192.168.238.20:80;
server_name www.xyw.com; 设置监听地址192.168.238.20
charset utf-8;
access_log logs/www.xyw.access.log; 设置日志名
location / {
root /var/www/html/xyw; 设置www.xyw.com的工作目录
index index.html index.php
}
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root html;
}
}
server {
listen 192.168.238.100:8080; 设置监听地址192.168.238.100
server_name www.benet.com;
charset utf-8;
access_log logs/www.benet.access.log;
location / {
root /var/www/html/benet;
index index.html index.php;
}
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root html;
}
}
}
systemctl restart nginx
浏览器访问
http://192.168.238.20
http://192.168.238.100:8080
九、基于端口的虚拟主机
vim /usr/local/nginx/conf/nginx.conf
.......
http {
......
server {
listen 192.168.238.20:8080; 设置监听8080端口
server_name www.xyw.com; 设置域名www.xyw.com
charset utf-8;
access_log logs/www.xyw.access.log; 设置日志名
location / {
root /var/www/html/xyw; 设置www.xyw.com的工作目录
index index.html index.php
}
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root html;
}
}
server {
listen 192.168.238.20:8888; 设置监听8888端口
server_name www.benet.com; 设置域名www.benet.com
charset utf-8;
access_log logs/www.benet.access.log;
location / {
root /var/www/html/benet;
index index.html index.php;
}
error_page 500 502 503 504 /50x.html;
location = 50x.html {
root html;
}
}
}
systemctl restart nginx
浏览器访问
http://192.168.238.20:8080
http://192.168.238.20:8888