1.实验拓扑:
2.实验要求:
3.实验代码:
1.GW:
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys GW
[GW]int g0/0/1
[GW-GigabitEthernet0/0/1]ip ad
[GW-GigabitEthernet0/0/1]ip address 192.168.1.254 24
Mar 30 2023 16:21:59-08:00 GW %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[GW-GigabitEthernet0/0/1]int g0/0/2
[GW-GigabitEthernet0/0/2]ip ad
[GW-GigabitEthernet0/0/2]ip address 192.168.2.254 24
Mar 30 2023 16:22:13-08:00 GW %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[GW-GigabitEthernet0/0/2]int g0/0/0
[GW-GigabitEthernet0/0/0]ip ad
[GW-GigabitEthernet0/0/0]ip address 12.1.1.1 30
Mar 30 2023 16:22:31-08:00 GW %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[GW-GigabitEthernet0/0/0]acl
[GW-GigabitEthernet0/0/0]aclq
^
Error: Unrecognized command found at '^' position.
[GW-GigabitEthernet0/0/0]q
[GW]ac
[GW]access-user
[GW]acl 3000
[GW-acl-adv-3000]rou
[GW-acl-adv-3000]r
[GW-acl-adv-3000]u
[GW-acl-adv-3000]ru
[GW-acl-adv-3000]rule 5 de
[GW-acl-adv-3000]rule 5 deny ip
[GW-acl-adv-3000]rule 5 deny ip sou
[GW-acl-adv-3000]rule 5 deny ip source 192.168.1.1 0 de
[GW-acl-adv-3000]rule 5 deny ip source 192.168.1.1 0 destination 192.168.2.1 0
[GW-acl-adv-3000]int g0/0/1
[GW-GigabitEthernet0/0/1]tr
[GW-GigabitEthernet0/0/1]tracert
[GW-GigabitEthernet0/0/1]traffic-filter in
[GW-GigabitEthernet0/0/1]traffic-filter inbound aacl
[GW-GigabitEthernet0/0/1]traffic-filter inbound acl
[GW-GigabitEthernet0/0/1]traffic-filter inbound acl 3000
[GW-GigabitEthernet0/0/1]q
[GW]acl
[GW]acl 2000
[GW-acl-basic-2000]ru
[GW-acl-basic-2000]rule 5 pe
[GW-acl-basic-2000]rule 5 permit sou
[GW-acl-basic-2000]rule 5 permit source 192.168.1.0 0.0.0.255
[GW-acl-basic-2000]int g0/0/0
[GW-GigabitEthernet0/0/0]ip
[GW-GigabitEthernet0/0/0]ip ad
[GW-GigabitEthernet0/0/0]ip address 12.1.1.1 30
Error: The address already exists.
[GW-GigabitEthernet0/0/0]ip address 12.1.1.1 30
Error: The address already exists.
[GW-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<GW>
<GW>sys
Enter system view, return user view with Ctrl+Z.
[GW]cal
[GW]acl
[GW]acl 2000
[GW-acl-basic-2000]q
[GW]int g0/0/0
[GW-GigabitEthernet0/0/0]ip ad
[GW-GigabitEthernet0/0/0]ip address 12.1.1.1 30
Error: The address already exists.
[GW-GigabitEthernet0/0/0]ip address 12.1.1.1 24
[GW-GigabitEthernet0/0/0]na
[GW-GigabitEthernet0/0/0]nat ou
[GW-GigabitEthernet0/0/0]nat outbound 2000
[GW-GigabitEthernet0/0/0]na
[GW-GigabitEthernet0/0/0]nat st
[GW-GigabitEthernet0/0/0]nat static gl
[GW-GigabitEthernet0/0/0]nat static global 100.1.1.1 in
[GW-GigabitEthernet0/0/0]nat static global 100.1.1.1 inside 192.168.2.1
[GW-GigabitEthernet0/0/0]ip rou
[GW-GigabitEthernet0/0/0]ip route
[GW-GigabitEthernet0/0/0]q
[GW]ip
[GW]ip rou
[GW]ip route-static 0.0.0.0 0.0.0.0 12.1.1.2
[GW]
<GW>ISP:
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys ISP
[ISP]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip ad
[ISP-GigabitEthernet0/0/0]ip address 12.1.1.2 30
Mar 30 2023 16:22:44-08:00 ISP %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[ISP-GigabitEthernet0/0/0]int l
[ISP-GigabitEthernet0/0/0]int l
[ISP-GigabitEthernet0/0/0]q
[ISP]int l
[ISP]int LoopBack 0
[ISP-LoopBack0]ip ad
[ISP-LoopBack0]ip address 2.2.2.2 32
[ISP-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<ISP>
<ISP>sys
Enter system view, return user view with Ctrl+Z.
[ISP]ip rou
[ISP]ip route
[ISP]ip route-static 100.1.1.2 24
^
Error:Incomplete command found at '^' position.
[ISP]ip route-static 100.1.1.1 255.255.255.255 12.1.1.1
[ISP]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip ad
[ISP-GigabitEthernet0/0/0]ip address 12.1.1.2 24
[ISP-GigabitEthernet0/0/0]
[ISP-GigabitEthernet0/0/0]
[ISP-GigabitEthernet0/0/0]4.实验结果:
