转-----Linux LVM分区之VG扩容、LV扩容、LV缩减、LVM快照

转 https://www.dwhd.org/20150521_225146.html

摘要

LVM是 Logical Volume Manager（逻辑卷管理）的简写，它是Linux环境下对磁盘分区进行管理的一种机制，它由Heinz Mauelshagen在Linux 2.4内核上实现，于1998年发布到Linux社区中，它允许你在Linux系统上用简单的命令行管理一个完整的逻辑卷管理环境。

一、简介
LVM是 Logical Volume Manager（逻辑卷管理）的简写，它是Linux环境下对磁盘分区进行管理的一种机制，它由Heinz Mauelshagen在Linux 2.4内核上实现，于1998年发布到Linux社区中，它允许你在Linux系统上用简单的命令行管理一个完整的逻辑卷管理环境。

二、版本
LVM1 最初的LVM与1998年发布，只在Linux内核2.4版本上可用，它提供最基本的逻辑卷管理。
LVM2 LVM-1的更新版本，在Linux内核2.6中才可用，它在标准的LVM-1功能外还提供了额外的功能。
查看：（测试机CentOS 6.6 X86_64）

[root@ZhongH100 ~]# rpm -qa | grep lvm

mesa-private-llvm-3.4-3.el6.x86_64

lvm2-libs-2.02.111-2.el6_6.2.x86_64

lvm2-2.02.111-2.el6_6.2.x86_64

[root@ZhongH100 ~]# cat /etc/centos-release

CentOS release 6.6 (Final)

[root@ZhongH100 ~]# uname -a

Linux ZhongH100.wxjr.com.cn 2.6.32-504.16.2.el6.centos.plus.x86_64 #1 SMP Wed Apr 22 00:59:31 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

[root@ZhongH100 ~]# getconf LONG_BIT

64

三、LVM 模块
Physical volume (PV)、Volume group (VG)、Logical volume(LV)、 Physical extent (PE)，下面我们用一个简单的图来说明下物理卷、卷组、逻辑卷他们之间的关系(此图只是个人理解，仅供参考)
LVM 详解
简而言之：
逻辑卷的创建，就是将多块硬盘创建物理卷，而将这些物理卷以逻辑的形式总成一个容器，然后从这个容器里面创建大小不同的分区文件，而这个容器就是所谓的逻辑卷，而从这个容器里创建大小不同的分区文件，这个分区文件就叫做逻辑卷。嘿嘿，你懂了吗？ ^_^ ……

四、具体操作
1. 分区（本实验环境使用的是一块新磁盘/dev/sdb）

[root@ZhongH100 ~]# fdisk -l /dev/sd[a-z]

Disk /dev/sda: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0006c656

Device Boot Start End Blocks Id System

/dev/sda1 * 1 64 512000 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 64 6591 52428800 8e Linux LVM

Disk /dev/sdb: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

[root@ZhongH100 ~]#

001

002

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

018

019

020

021

022

023

024

025

026

027

028

029

030

031

032

033

034

035

036

037

038

039

040

041

042

043

044

045

046

047

048

049

050

051

052

053

054

055

056

057

058

059

060

061

062

063

064

065

066

067

068

069

070

071

072

073

074

075

076

077

078

079

080

081

082

083

084

085

086

087

088

089

090

091

092

093

094

095

096

097

098

099

100

101

102

[root@ZhongH100 ~]# fdisk /dev/sdb #试用fdisk命令来管理磁盘分区

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xfb1f25cf.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help): p #输入p来打印当前磁盘上的分区

Disk /dev/sdb: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xfb1f25cf

Device Boot Start End Blocks Id System

Command (m for help): n #输入n 新建分区

Command action

e extended

p primary partition (1-4)

p #输入p 选择分区类型为主分区

Partition number (1-4): 1 #输入1 选择为第一个主分区

First cylinder (1-7832, default 1): #直接回车选择分区起始块为1

Using default value 1

Last cylinder, +cylinders or +size{K,M,G} (1-7832, default 7832): +10G #输入+10G 为新分区大小为10G

Command (m for help): n #输入n 在当前磁盘上再次新建一个分区

Command action

e extended

p primary partition (1-4)

p #输入p 选择分区类型为主分区

Partition number (1-4): 2 #输入2 选择为第二个主分区

First cylinder (1307-7832, default 1307): #直接回车选择分区起始块为1307

Using default value 1307

Last cylinder, +cylinders or +size{K,M,G} (1307-7832, default 7832): +10G #输入+10G 为新分区大小为10G

Command (m for help): n #输入n 在当前磁盘上再次新建一个分区

Command action

e extended

p primary partition (1-4)

p #输入p 选择分区类型为主分区

Partition number (1-4): 3 #输入3 选择为第三个主分区

First cylinder (2613-7832, default 2613): #直接回车选择分区起始块为2613

Using default value 2613

Last cylinder, +cylinders or +size{K,M,G} (2613-7832, default 7832): +10G #输入+10G 为新分区大小为10G

Command (m for help): p #输入p来打印当前磁盘上的分区

Disk /dev/sdb: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xfb1f25cf

Device Boot Start End Blocks Id System

/dev/sdb1 1 1306 10490413+ 83 Linux

/dev/sdb2 1307 2612 10490445 83 Linux

/dev/sdb3 2613 3918 10490445 83 Linux

Command (m for help): t #输入t 来改变分区类型

Partition number (1-4): 1 #输入1 来选择改变分区类型的分区号为1

Hex code (type L to list codes): 8e #输入8e 改变分区类型为LVM

Changed system type of partition 1 to 8e (Linux LVM)

Command (m for help): t #输入t 来改变分区类型

Partition number (1-4): 2 #输入2 来选择改变分区类型的分区号为2

Hex code (type L to list codes): 8e #输入8e 改变分区类型为LVM

Changed system type of partition 2 to 8e (Linux LVM)

Command (m for help): t #输入t 来改变分区类型

Partition number (1-4): 3 #输入3 来选择改变分区类型的分区号为3

Hex code (type L to list codes): 8e #输入8e 改变分区类型为LVM

Changed system type of partition 3 to 8e (Linux LVM)

Command (m for help): p #输入p来打印当前磁盘上的分区

Disk /dev/sdb: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xfb1f25cf

Device Boot Start End Blocks Id System

/dev/sdb1 1 1306 10490413+ 8e Linux LVM

/dev/sdb2 1307 2612 10490445 8e Linux LVM

/dev/sdb3 2613 3918 10490445 8e Linux LVM

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

[root@ZhongH100 ~]#

新分区完毕后我们需要让内核重新载入,如果执行一次不能载入所有分区那么就多执行几次，直至全部能识别到，我们的sdb上有3个分区，下面的命令已经显示全部识别了

[root@ZhongH100 ~]# partx -a /dev/sdb

BLKPG: Device or resource busy

error adding partition 1

BLKPG: Device or resource busy

error adding partition 2

BLKPG: Device or resource busy

error adding partition 3

2. 将物理分区与硬盘创建为物理卷(pvcreate)

[root@ZhongH100 ~]# pvcreate /dev/sdb1 /dev/sdb2 /dev/sdb3 #这是正常的命令写法也可以使用下面那种扩展写法^C

[root@ZhongH100 ~]# pvcreate /dev/sdb{1,2,3}

Physical volume "/dev/sdb1" successfully created

Physical volume "/dev/sdb2" successfully created

Physical volume "/dev/sdb3" successfully created

[root@ZhongH100 ~]# pvs #使用pvs来查看当前系统上所有的pv

PV VG Fmt Attr PSize PFree

/dev/sdb1 lvm2 --- 10.00g 10.00g

/dev/sdb2 lvm2 --- 10.00g 10.00g

/dev/sdb3 lvm2 --- 10.00g 10.00g

[root@ZhongH100 ~]#

3. 将物理卷(pv)创建为卷组(vgcreate)，名为VGtest

[root@ZhongH100 ~]# vgcreate VGtest /dev/sdb{1,2,3}

Volume group "VGtest" successfully created

[root@ZhongH100 ~]# vgs

VG #PV #LV #SN Attr VSize VFree

VGtest 3 0 0 wz--n- 30.00g 30.00g

[root@ZhongH100 ~]# vgdisplay

--- Volume group ---

VG Name VGtest #卷组名是VGtest

System ID

Format lvm2

Metadata Areas 3

Metadata Sequence No 1

VG Access read/write

VG Status resizable

MAX LV 0

Cur LV 0

Open LV 0

Max PV 0

Cur PV 3

Act PV 3

VG Size 30.00 GiB #新的VG大小是30G 3个10G分区组成的

PE Size 4.00 MiB #物理盘的基本单位：默认4MB

Total PE 7680

Alloc PE / Size 0 / 0

Free PE / Size 7680 / 30.00 GiB

VG UUID W8fYiw-Zh46-53lr-qWuf-hqLR-Rqla-x1mFQH

[root@ZhongH100 ~]#

4. 在卷组里创建逻辑卷并格式化、挂载使用

[root@ZhongH100 ~]# lvcreate -L 2G -n LVtest1 VGtest #在名为VGtest的VG上创建一个名为LVtest1 大小为2G的逻辑卷

Logical volume "LVtest1" created

[root@ZhongH100 ~]# lvs #查看系统上的LV逻辑卷

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

LVtest1 VGtest -wi-a----- 2.00g

[root@ZhongH100 ~]# mke2fs -t ext4 /dev/VGtest/LVtest1 #格式化新建的LVtest1逻辑卷为ext4格式

mke2fs 1.41.12 (17-May-2010)

文件系统标签=

操作系统:Linux

块大小=4096 (log=2)

分块大小=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

131072 inodes, 524288 blocks

26214 blocks (5.00%) reserved for the super user

第一个数据块=0

Maximum filesystem blocks=536870912

16 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912

正在写入inode表: 完成

Creating journal (16384 blocks): 完成

Writing superblocks and filesystem accounting information: 完成

This filesystem will be automatically checked every 25 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

[root@ZhongH100 ~]# mkdir /LVtest1 #创建一个LVtest1的目录

[root@ZhongH100 ~]# mount /dev/VGtest/LVtest1 /LVtest1 #将/dev/VGtest/LVtest1这个逻辑卷挂载到 /LVtest1目录上

[root@ZhongH100 ~]# mount #查看挂载情况

/dev/mapper/vgzhongH-root on / type ext4 (rw,acl)

proc on /proc type proc (rw)

sysfs on /sys type sysfs (rw)

devpts on /dev/pts type devpts (rw,gid=5,mode=620)

tmpfs on /dev/shm type tmpfs (rw)

/dev/sda1 on /boot type ext4 (rw)

/dev/mapper/vgzhongH-data on /data type ext4 (rw,acl)

none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

/dev/mapper/VGtest-LVtest1 on /LVtest1 type ext4 (rw) #挂载成功分区格式是ext4 可读写

[root@ZhongH100 ~]# df -hP #查看系统上的分区情况

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/vgzhongH-root 30G 3.3G 25G 12% /

tmpfs 932M 0 932M 0% /dev/shm

/dev/sda1 477M 34M 418M 8% /boot

/dev/mapper/vgzhongH-data 4.8G 10M 4.6G 1% /data

/dev/mapper/VGtest-LVtest1 2.0G 3.0M 1.9G 1% /LVtest1 #LVtest1逻辑卷分区正常

[root@ZhongH100 ~]#

5. 发现卷组pv空间不够，我们需要扩大卷组空间
 现在系统上新增了一块20G的硬盘/dev/sdc

[root@ZhongH100 ~]# fdisk -l /dev/sd[a-z]

Disk /dev/sda: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0006c656

Device Boot Start End Blocks Id System

/dev/sda1 * 1 64 512000 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 64 6591 52428800 8e Linux LVM

Disk /dev/sdb: 64.4 GB, 64424509440 bytes

255 heads, 63 sectors/track, 7832 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xfb1f25cf

Device Boot Start End Blocks Id System

/dev/sdb1 1 1306 10490413+ 8e Linux LVM

/dev/sdb2 1307 2612 10490445 8e Linux LVM

/dev/sdb3 2613 3918 10490445 8e Linux LVM

Disk /dev/sdc: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

[root@ZhongH100 ~]# pvcreate /dev/sdc #将新硬盘/sdc加入物理卷上

Physical volume "/dev/sdc" successfully created

[root@ZhongH100 ~]# pvs #查看物理卷

PV VG Fmt Attr PSize PFree

/dev/sdb1 VGtest lvm2 a-- 10.00g 8.00g

/dev/sdb2 VGtest lvm2 a-- 10.00g 10.00g

/dev/sdb3 VGtest lvm2 a-- 10.00g 10.00g

/dev/sdc lvm2 --- 20.00g 20.00g

[root@ZhongH100 ~]# vgextend VGtest /dev/sdc #扩展卷组

Volume group "VGtest" successfully extended

[root@ZhongH100 ~]# vgs #查看卷组

VG #PV #LV #SN Attr VSize VFree

VGtest 4 1 0 wz--n- 50.00g 48.00g #从大小可以看出我们已经扩容成功

6. 扩展逻辑卷 (支持在线扩展)
 在线将/dev/VGtest/LVtest1 扩展到4G，并且要求数据可以正常访问

[root@ZhongH100 ~]# cd /LVtest1/

[root@ZhongH100 LVtest1]# echo "this is a test for LVM" > lvtest #穿件个lvtest的文件并写入内容

[root@ZhongH100 LVtest1]# cat lvtest

this is a test for LVM

[root@ZhongH100 LVtest1]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

LVtest1 VGtest -wi-ao---- 2.00g

[root@ZhongH100 LVtest1]# lvextend -L +2G /dev/VGtest/LVtest1

Size of logical volume VGtest/LVtest1 changed from 2.00 GiB (512 extents) to 4.00 GiB (1024 extents).

Logical volume LVtest1 successfully resized

[root@ZhongH100 LVtest1]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

LVtest1 VGtest -wi-ao---- 4.00g #逻辑卷空间已经增加

[root@ZhongH100 LVtest1]# e2fsck -f /dev/VGtest/LVtest1

[root@ZhongH100 LVtest1]# resize2fs -p /dev/VGtest/LVtest1 #通过 resize2fs 将文件系统的容量确实添加

resize2fs 1.41.12 (17-May-2010)

Filesystem at /dev/VGtest/LVtest1 is mounted on /LVtest1; on-line resizing required

old desc_blocks = 1, new_desc_blocks = 1

Performing an on-line resize of /dev/VGtest/LVtest1 to 1048576 (4k) blocks.

The filesystem on /dev/VGtest/LVtest1 is now 1048576 blocks long.

[root@ZhongH100 LVtest1]# cat l

lost+found/ lvtest

[root@ZhongH100 LVtest1]# cat lvtest #文件没有受损

this is a test for LVM

[root@ZhongH100 LVtest1]# df -hP

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/vgzhongH-root 30G 3.3G 25G 12% /

tmpfs 932M 0 932M 0% /dev/shm

/dev/sda1 477M 34M 418M 8% /boot

/dev/mapper/vgzhongH-data 4.8G 10M 4.6G 1% /data

/dev/mapper/VGtest-LVtest1 3.9G 4.0M 3.7G 1% /LVtest1 #挂载的分区空间已经增加

[root@ZhongH100 LVtest1]#

如果是xfs文件系统话上面这种扩容方法就不行了，需要用下面的方法,
参考：https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/xfsgrow.html
http://oss.sgi.com/archives/xfs/2001-05/msg03189.html

[root@www ~]# pvs

PV VG Fmt Attr PSize PFree

/dev/xvda2 LBVG lvm2 a-- 14.51g 0

/dev/xvda3 LBVG lvm2 a-- 135.00g 85.01g

[root@www ~]# vgs

VG #PV #LV #SN Attr VSize VFree

LBVG 2 2 0 wz--n- 149.51g 85.01g

[root@www ~]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

root LBVG -wi-ao---- 62.00g

swap LBVG -wi-ao---- 2.50g

[root@www ~]# lvcreate -L 10G -n data LBVG

Logical volume "data" created.

[root@www ~]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

data LBVG -wi-a----- 10.00g

root LBVG -wi-ao---- 62.00g

swap LBVG -wi-ao---- 2.50g

[root@www ~]# mkfs.xfs /dev/LBVG/data

meta-data=/dev/LBVG/data isize=512 agcount=4, agsize=655360 blks

= sectsz=512 attr=2, projid32bit=1

= crc=1 finobt=1, sparse=0

data = bsize=4096 blocks=2621440, imaxpct=25

= sunit=0 swidth=0 blks

naming =version 2 bsize=4096 ascii-ci=0 ftype=1

log =internal log bsize=4096 blocks=2560, version=2

= sectsz=512 sunit=0 blks, lazy-count=1

realtime =none extsz=4096 blocks=0, rtextents=0

[root@www ~]# lvextend -L +5G /dev/LBVG/data

Size of logical volume LBVG/data changed from 10.00 GiB (2560 extents) to 15.00 GiB (3840 extents).

Logical volume data successfully resized.

[root@www ~]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

data LBVG -wi-a----- 15.00g

root LBVG -wi-ao---- 62.00g

swap LBVG -wi-ao---- 2.50g

[root@www ~]# e2fsck -f /dev/LBVG/data

e2fsck 1.42.13 (17-May-2015)

ext2fs_open2: Bad magic number in super-block

e2fsck: 超级块无效, trying backup blocks...

e2fsck: Bad magic number in super-block 当尝试打开 /dev/LBVG/data 时

The 超级块 could not be read or does not describe a valid ext2/ext3/ext4

文件系统. If the 设备 is valid and it really contains an ext2/ext3/ext4

文件系统 (and not swap or ufs or something else), then the 超级块

is corrupt, and you might try running e2fsck with an alternate 超级块:

e2fsck -b 8193 <设备>

or

e2fsck -b 32768 <设备>

[root@www ~]# mkdir /data

[root@www ~]# mount /dev/LBVG/data /data

[root@www ~]# df -hP|grep /data

文件系统容量已用可用已用% 挂载点

/dev/mapper/LBVG-data 10G 33M 10G 1% /data

[root@www ~]# xfs_growfs /dev/LBVG/data

meta-data=/dev/mapper/LBVG-data isize=512 agcount=4, agsize=655360 blks

= sectsz=512 attr=2, projid32bit=1

= crc=1 finobt=1 spinodes=0

data = bsize=4096 blocks=2621440, imaxpct=25

= sunit=0 swidth=0 blks

naming =version 2 bsize=4096 ascii-ci=0 ftype=1

log =internal bsize=4096 blocks=2560, version=2

= sectsz=512 sunit=0 blks, lazy-count=1

realtime =none extsz=4096 blocks=0, rtextents=0

data blocks changed from 2621440 to 3932160

[root@www ~]# df -hP|grep /data

文件系统容量已用可用已用% 挂载点

/dev/mapper/LBVG-data 15G 33M 15G 1% /data

[root@www ~]#

7. 缩减逻辑卷
 查看逻辑卷使用空间状况
 不能在线缩减，得先卸载 切记
 确保缩减后的空间大小依然能存储原有的所有数据
 在缩减之前应该先强行检查文件，以确保文件系统处于一至性状态

[root@ZhongH100 ~]# umount /dev/VGtest/LVtest1 #卸载/dev/VGtest/LVtest1

[root@ZhongH100 ~]# e2fsck -f /dev/VGtest/LVtest1 #强制检查文件系统

e2fsck 1.41.12 (17-May-2010)

第一步: 检查inode,块,和大小

第二步: 检查目录结构

第3步: 检查目录连接性

Pass 4: Checking reference counts

第5步: 检查簇概要信息

/dev/VGtest/LVtest1: 12/262144 files (0.0% non-contiguous), 33871/1048576 blocks

[root@ZhongH100 ~]# resize2fs /dev/VGtest/LVtest1 1G #缩减逻辑大小到1G

resize2fs 1.41.12 (17-May-2010)

Resizing the filesystem on /dev/VGtest/LVtest1 to 262144 (4k) blocks.

The filesystem on /dev/VGtest/LVtest1 is now 262144 blocks long.

[root@ZhongH100 ~]# lvreduce -L 1G /dev/VGtest/LVtest1

WARNING: Reducing active logical volume to 1.00 GiB

THIS MAY DESTROY YOUR DATA (filesystem etc.)

Do you really want to reduce LVtest1? [y/n]: y #输入y 同意裁剪

Size of logical volume VGtest/LVtest1 changed from 4.00 GiB (1024 extents) to 1.00 GiB (256 extents).

Logical volume LVtest1 successfully resized

[root@ZhongH100 ~]# lvs #查看逻辑卷

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert

LVtest1 VGtest -wi-a----- 1.00g

[root@ZhongH100 ~]# mount /dev/VGtest/LVtest1 /LVtest1/ #挂载逻辑卷/dev/VGtest/LVtest1

[root@ZhongH100 ~]# df -hP #查看系统分区详情

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/vgzhongH-root 30G 3.3G 25G 12% /

tmpfs 932M 0 932M 0% /dev/shm

/dev/sda1 477M 34M 418M 8% /boot

/dev/mapper/vgzhongH-data 4.8G 10M 4.6G 1% /data

/dev/mapper/VGtest-LVtest1 944M 2.6M 891M 1% /LVtest1 #已经缩减成功

[root@ZhongH100 ~]# cat /LVtest1/lvtest #查看缩减前文件是否受损

this is a test for LVM

[root@ZhongH100 ~]#

8. 缩减磁盘空间
 发现物理磁盘空间使用不足，将其中一块硬盘或分区拿掉
 pvmove /dev/sdb1 #将/dev/sdb1上存储的数据移到其它物理卷中
 vgreduce VGtest /dev/sdb1 #将/dev/sdb1从VGtest卷组中移除
 pvremove /dev/sdb1 #将/dev/sdb1从物理卷上移除

[root@ZhongH100 ~]# pvs

PV VG Fmt Attr PSize PFree

/dev/sdb1 VGtest lvm2 a-- 10.00g 9.00g

/dev/sdb2 VGtest lvm2 a-- 10.00g 10.00g

/dev/sdb3 VGtest lvm2 a-- 10.00g 10.00g

/dev/sdc VGtest lvm2 a-- 20.00g 20.00g

[root@ZhongH100 ~]# pvmove /dev/sdb1

/dev/sdb1: Moved: 2.3%

/dev/sdb1: Moved: 86.3%

/dev/sdb1: Moved: 100.0%

[root@ZhongH100 ~]# vgreduce VGtest /dev/sdb1

Removed "/dev/sdb1" from volume group "VGtest"

[root@ZhongH100 ~]# pvremove /dev/sdb1

Labels on physical volume "/dev/sdb1" successfully wiped

[root@ZhongH100 ~]# pvs

PV VG Fmt Attr PSize PFree

/dev/sdb2 VGtest lvm2 a-- 10.00g 9.00g

/dev/sdb3 VGtest lvm2 a-- 10.00g 10.00g

/dev/sdc VGtest lvm2 a-- 20.00g 20.00g

[root@ZhongH100 ~]#

9. 实现快照，进行备份还原
 在/mnt/lvm目录上，我们将原始的目录文件进行快照，然后将/LVtets1目录中的内容清空，并进行还原

[root@ZhongH100 ~]# cat /LVtest1/lvtest

this is a test for LVM

[root@ZhongH100 ~]# lvcreate -L 30M -n backup -s -p r /dev/VGtest/LVtest1

Rounding up size to full physical extent 32.00 MiB

Logical volume "backup" created

[root@ZhongH100 ~]# mkdir /tmp/backup/

[root@ZhongH100 ~]# mount /dev/VGtest/backup /tmp/backup/

mount: block device /dev/mapper/VGtest-backup is write-protected, mounting read-only

[root@ZhongH100 ~]# cat /tmp/backup/lvtest

this is a test for LVM

[root@ZhongH100 ~]# rm -rf /LVtest1/*

You are going to execute "/bin/rm -rf /LVtest1/lost+found /LVtest1/lvtest",please confirm (yes or no):yes

[root@ZhongH100 ~]# cd /LVtest1/

[root@ZhongH100 LVtest1]# ls -l

总用量 0

[root@ZhongH100 LVtest1]# tar xf /tmp/sandy.tar.bz2

[root@ZhongH100 LVtest1]# ls -l

总用量 8

drwx------ 2 root root 4096 5月 21 23:33 lost+found

-rw-r--r-- 1 root root 23 5月 21 23:53 lvtest

[root@ZhongH100 LVtest1]# cat lvtest

this is a test for LVM

[root@ZhongH100 LVtest1]# df -hP

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/vgzhongH-root 30G 3.3G 25G 12% /

tmpfs 932M 0 932M 0% /dev/shm

/dev/sda1 477M 34M 418M 8% /boot

/dev/mapper/vgzhongH-data 4.8G 10M 4.6G 1% /data

/dev/mapper/VGtest-LVtest1 944M 2.5M 891M 1% /LVtest1

/dev/mapper/VGtest-backup 944M 2.6M 891M 1% /tmp/backup

[root@ZhongH100 LVtest1]#

转-----Linux LVM分区之VG扩容、LV扩容、LV缩减、LVM快照

猜你喜欢