Debian 9.x "stretch" 解决 /etc/rc.local 开机启动问题

由于某些软件并没有增加开启启动的服务,很多时候需要手工添加,一般我们都是推荐添加命令到 /etc/rc.local 文件,但是 Debian 9 默认不带 /etc/rc.local 文件,而 rc.local 服务却还是自带的

复制代码
root@debian9 ~ # cat /lib/systemd/system/rc.local.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # This unit gets pulled automatically into multi-user.target by # systemd-rc-local-generator if /etc/rc.local is executable. [Unit] Description=/etc/rc.local Compatibility ConditionFileIsExecutable=/etc/rc.local After=network.target [Service] Type=forking ExecStart=/etc/rc.local start TimeoutSec=0 RemainAfterExit=yes GuessMainPID=no
复制代码

并且默认情况下这个服务还是关闭的状态

复制代码
root@debian9 ~ # systemctl status rc-local
● rc-local.service - /etc/rc.local Compatibility
   Loaded: loaded (/lib/systemd/system/rc-local.service; static; vendor preset: enabled)
  Drop-In: /lib/systemd/system/rc-local.service.d └─debian.conf Active: inactive (dead)
复制代码

为了解决这个问题,我们需要手工添加一个 /etc/rc.local 文件

复制代码
cat <<EOF >/etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. exit 0 EOF
复制代码

然后赋予权限

chmod +x /etc/rc.local

接着启动 rc-local 服务

systemctl start rc-local

再次查看状态

复制代码
root@debian9 ~ # systemctl status rc-local
● rc-local.service - /etc/rc.local Compatibility
   Loaded: loaded (/lib/systemd/system/rc-local.service; static; vendor preset: enabled)
  Drop-In: /lib/systemd/system/rc-local.service.d └─debian.conf Active: active (exited) since Thu 2017-08-03 09:41:18 UTC; 14s ago Process: 20901 ExecStart=/etc/rc.local start (code=exited, status=0/SUCCESS) Aug 03 09:41:18 xtom-proxy systemd[1]: Starting /etc/rc.local Compatibility... Aug 03 09:41:18 xtom-proxy systemd[1]: Started /etc/rc.local Compatibility.
复制代码

然后你就可以把需要开机启动的命令添加到 /etc/rc.local 文件,丢在 exit 0 前面即可,并尝试重启以后试试是否生效了

由于某些软件并没有增加开启启动的服务,很多时候需要手工添加,一般我们都是推荐添加命令到 /etc/rc.local 文件,但是 Debian 9 默认不带 /etc/rc.local 文件,而 rc.local 服务却还是自带的

复制代码
root@debian9 ~ # cat /lib/systemd/system/rc.local.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # This unit gets pulled automatically into multi-user.target by # systemd-rc-local-generator if /etc/rc.local is executable. [Unit] Description=/etc/rc.local Compatibility ConditionFileIsExecutable=/etc/rc.local After=network.target [Service] Type=forking ExecStart=/etc/rc.local start TimeoutSec=0 RemainAfterExit=yes GuessMainPID=no
复制代码

并且默认情况下这个服务还是关闭的状态

复制代码
root@debian9 ~ # systemctl status rc-local
● rc-local.service - /etc/rc.local Compatibility
   Loaded: loaded (/lib/systemd/system/rc-local.service; static; vendor preset: enabled)
  Drop-In: /lib/systemd/system/rc-local.service.d └─debian.conf Active: inactive (dead)
复制代码

为了解决这个问题,我们需要手工添加一个 /etc/rc.local 文件

复制代码
cat <<EOF >/etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. exit 0 EOF
复制代码

然后赋予权限

chmod +x /etc/rc.local

接着启动 rc-local 服务

systemctl start rc-local

再次查看状态

复制代码
root@debian9 ~ # systemctl status rc-local
● rc-local.service - /etc/rc.local Compatibility
   Loaded: loaded (/lib/systemd/system/rc-local.service; static; vendor preset: enabled)
  Drop-In: /lib/systemd/system/rc-local.service.d └─debian.conf Active: active (exited) since Thu 2017-08-03 09:41:18 UTC; 14s ago Process: 20901 ExecStart=/etc/rc.local start (code=exited, status=0/SUCCESS) Aug 03 09:41:18 xtom-proxy systemd[1]: Starting /etc/rc.local Compatibility... Aug 03 09:41:18 xtom-proxy systemd[1]: Started /etc/rc.local Compatibility.
复制代码

然后你就可以把需要开机启动的命令添加到 /etc/rc.local 文件,丢在 exit 0 前面即可,并尝试重启以后试试是否生效了

猜你喜欢

转载自www.cnblogs.com/chdiablo/p/9828886.html