sublime运行C/C++

版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/Magic_Ninja/article/details/83021001

准备环境

为了快捷起见，建议安装Dev-C++，去里面找到MinGW64
然后配置环境变量一直到MinGW64\bin下
然后通过cmd测试

这样则表示把C和C++编译器环境加入系统环境

配置sublime

接下来我们配置sublime，打开sublime，点击Tools→Build System→New Build System，接下来把里面的东西都删掉~粘贴以下代码

{
	"cmd": ["g++","-Wall", "${file}", "-o", "${file_path}/${file_base_name}"],
	"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
	"working_dir": "${file_path}",
	"selector": "source.c, source.c++",
	"encoding":"cp936",
	"variants":
	[
		{
		"name": "Run",
		"cmd": ["cmd", "/c", "g++", "-Wall","${file}", "-o", "${file_path}/${file_base_name}", "&&", "cmd", "/c", "${file_path}/${file_base_name}"]
		},
		{
			"name": "RunInCommand",
			"cmd": ["cmd", "/c", "g++", "-Wall","${file}", "-o", "${file_path}/${file_base_name}", "&&", "start", "cmd", "/c", "${file_path}/${file_base_name} & echo.&pause"]
		}
	]
}

配置快捷启动键

点击Perferences→Key Bindings - User，删除所有东西，粘贴如下代码：

[
	{
		"keys": ["f9"], 
		"command": "build", 
		"args": {"variant": "RunInCommand"}
		}
] 

注意不要有多余的东西哦，然后同样Ctrl+S直接保存即可。如果想改成F5或者F6或者其它，把代码里面的f9改一下就好啦。

敲代码，Ctrl+S保存代码，F9运行，启动cmd运行！完美。