ppc64le处理器国产power8服务器CentOS7.2安装mysql数据库
在这里先演示正确安装的截图
安装失败的简述一下
1、按照我之前这篇 https://blog.csdn.net/frdevolcqzyxynjds/article/details/103165742
即 yum 方式安装，报错无法解决，如下所示：
[root@admin soft]# yum list | grep mysql
http://repo.mysql.com/yum/mysql-connectors-community/el/7/ppc64le/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article
https://wiki.centos.org/yum-errors
If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
One of the configured repositories failed (MySQL Connectors Community),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=mysql-connectors-community ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable mysql-connectors-community
or
subscription-manager repos --disable=mysql-connectors-community
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=mysql-connectors-community.skip_if_unavailable=true
failure: repodata/repomd.xml from mysql-connectors-community: [Errno 256] No more mirrors to try.
http://repo.mysql.com/yum/mysql-connectors-community/el/7/ppc64le/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
[root@admin soft]#
[root@admin soft]# yum install mysql
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/ppc64le/metalink | 6.0 kB 00:00:00
* base: mirrors.huaweicloud.com
* epel: mirrors.tuna.tsinghua.edu.cn
* extras: mirrors.huaweicloud.com
* updates: mirrors.huaweicloud.com
base | 3.6 kB 00:00:00
epel | 5.4 kB 00:00:00
extras | 2.9 kB 00:00:00
http://repo.mysql.com/yum/mysql-connectors-community/el/7/ppc64le/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article
https://wiki.centos.org/yum-errors
If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
One of the configured repositories failed (MySQL Connectors Community),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=mysql-connectors-community ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable mysql-connectors-community
or
subscription-manager repos --disable=mysql-connectors-community
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=mysql-connectors-community.skip_if_unavailable=true
failure: repodata/repomd.xml from mysql-connectors-community: [Errno 256] No more mirrors to try.
http://repo.mysql.com/yum/mysql-connectors-community/el/7/ppc64le/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
[root@admin soft]#然后尝试以下两个安装
mysql-boost-5.7.16.tar.gz，boost_1_59_0.tar.gz
这老哥博客写的可以
https://blog.csdn.net/chaigang/article/details/80481588
这老哥的论坛写得也可以
https://bbs.csdn.net/topics/392045603?page=1
---------------------------------------------------------
首先下载 mysql-boost-5.7.16.tar.gz
下载通用linux版本的源代码
包含boost header的版本
mysql-boost-5.7.16.tar.gz
[root@admin soft]# ll
total 59140
-rw-r--r--. 1 root root 60556473 Nov 22 16:09 mysql-boost-5.7.16.tar.gz
[root@admin soft]#
[root@admin soft]#
[root@admin soft]# rpm -qa boost*
[root@admin soft]#
[root@admin soft]# tar zxvf mysql-boost-5.7.16.tar.gz
[root@admin soft]# ll
total 59144
drwxr-xr-x. 36 7161 31415 4096 Sep 29 2016 mysql-5.7.16
-rw-r--r--. 1 root root 60556473 Nov 22 16:09 mysql-boost-5.7.16.tar.gz
[root@admin soft]#
[root@admin soft]# cd /usr/
[root@admin usr]#
[root@admin usr]# ls
bin etc games include java lib lib64 libexec local sbin share src tmp
[root@admin usr]#
[root@admin usr]# mkdir mysql
[root@admin usr]#
[root@admin usr]# ls
bin etc games include java lib lib64 libexec local mysql sbin share src tmp
[root@admin usr]# cd /opt/soft/
[root@admin soft]#
[root@admin soft]# ll
total 59144
drwxr-xr-x. 36 7161 31415 4096 Sep 29 2016 mysql-5.7.16
-rw-r--r--. 1 root root 60556473 Nov 22 16:09 mysql-boost-5.7.16.tar.gz
[root@admin soft]#
[root@admin soft]# mv mysql-5.7.16/ /usr/mysql/
[root@admin soft]#
[root@admin soft]# ll
total 59140
-rw-r--r--. 1 root root 60556473 Nov 22 16:09 mysql-boost-5.7.16.tar.gz
[root@admin soft]#
[root@admin soft]# rm -rf mysql-boost-5.7.16.tar.gz
[root@admin soft]#
[root@admin soft]# ll
total 0
[root@admin soft]#
[root@admin soft]# cd /usr/mysql/
[root@admin mysql]# ll
total 4
drwxr-xr-x. 36 7161 31415 4096 Sep 29 2016 mysql-5.7.16
[root@admin mysql]#
[root@admin mysql]#
[root@admin mysql]# ls
mysql-5.7.16
[root@admin mysql]#
[root@admin mysql]# cd mysql-5.7.16/
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]# ls
boost configure.cmake INSTALL man README support-files
BUILD COPYING libbinlogevents mysql-test regex testclients
client dbug libbinlogstandalone mysys scripts unittest
cmake Docs libevent mysys_ssl sql VERSION
CMakeLists.txt Doxyfile-perfschema libmysql packaging sql-common vio
cmd-line-utils extra libmysqld plugin storage win
config.h.cmake include libservices rapid strings zlib
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]# pwd
/usr/mysql/mysql-5.7.16
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]#
[root@admin ~]# cd /usr
[root@admin usr]# ls
bin etc games include java lib lib64 libexec local mysql sbin share src tmp
[root@admin usr]# cd mysql/
[root@admin mysql]#
[root@admin mysql]# ls
mysql-5.7.16
[root@admin mysql]#
[root@admin mysql]# pwd
/usr/mysql
[root@admin mysql]#
[root@admin mysql]# mkdir data
[root@admin mysql]#
[root@admin mysql]# ll
total 4
drwxr-xr-x. 2 root root 6 Nov 22 16:34 data
drwxr-xr-x. 36 7161 31415 4096 Sep 29 2016 mysql-5.7.16
[root@admin mysql]#
[root@admin mysql]#
[root@admin mysql]# cd mysql-5.7.16/
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]# pwd
/usr/mysql/mysql-5.7.16
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]# ls
boost configure.cmake INSTALL man README support-files
BUILD COPYING libbinlogevents mysql-test regex testclients
client dbug libbinlogstandalone mysys scripts unittest
cmake Docs libevent mysys_ssl sql VERSION
CMakeLists.txt Doxyfile-perfschema libmysql packaging sql-common vio
cmd-line-utils extra libmysqld plugin storage win
config.h.cmake include libservices rapid strings zlib
[root@admin mysql-5.7.16]#
[root@admin mysql-5.7.16]#
--------------------------
安装依赖包之前先加一个yum源
[root@admin ~]# cd /etc/
[root@admin etc]#
[root@admin etc]# ll
......
drwxr-xr-x. 6 root root 100 Oct 24 10:53 yum
-rw-r--r--. 1 root root 970 Aug 8 19:57 yum.conf
[root@admin etc]#
[root@admin etc]# mkdir yum.repos.d
[root@admin etc]#
[root@admin etc]# ll
......
drwxr-xr-x. 6 root root 100 Oct 24 10:53 yum
-rw-r--r--. 1 root root 970 Aug 8 19:57 yum.conf
drwxr-xr-x. 2 root root 6 Nov 22 17:14 yum.repos.d
[root@admin etc]#
[root@admin etc]# cd yum.repos.d/
[root@admin yum.repos.d]#
[root@admin yum.repos.d]# ll
total 0
[root@admin yum.repos.d]#
[root@admin yum.repos.d]#
然后把本地文件上传上去
[root@admin yum.repos.d]#
[root@admin yum.repos.d]# ll
total 28
-rw-r--r--. 1 root root 1565 Nov 22 17:17 CentOS-Base.repo
-rw-r--r--. 1 root root 1384 Nov 22 17:17 CentOS-CR.repo
-rw-r--r--. 1 root root 649 Nov 22 17:17 CentOS-Debuginfo.repo
-rw-r--r--. 1 root root 259 Nov 22 17:17 CentOS-fasttrack.repo
-rw-r--r--. 1 root root 704 Nov 22 17:17 CentOS-Media.repo
-rw-r--r--. 1 root root 1629 Nov 22 17:17 CentOS-Sources.repo
-rw-r--r--. 1 root root 4086 Nov 22 17:17 CentOS-Vault.repo
[root@admin yum.repos.d]#
----------------------------
下面开始安装依赖包
yum -y install make
[root@admin ~]# yum -y install make
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
base | 3.6 kB 00:00:00
Not using downloaded base/repomd.xml because it is older than what we have:
Current : Fri Sep 13 02:49:29 2019
Downloaded: Tue Sep 10 03:00:08 2019
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
(1/2): extras/7/ppc64le/primary_db | 136 kB 00:00:01
(2/2): updates/7/ppc64le/primary_db | 3.7 MB 00:03:19
base/7/ppc64le/primary_db FAILED
http://mirror.centos.org/altarch/7/os/ppc64le/repodata/7fcd43b0eb8c1316bb644d7642c92926cdf9a69528e35062c6e64df0b17ae0da-primary.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article
https://wiki.centos.org/yum-errors
If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
http://mirror.centos.org/altarch/7/os/ppc64le/repodata/7fcd43b0eb8c1316bb644d7642c92926cdf9a69528e35062c6e64df0b17ae0da-primary.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/7fcd43b0eb8c1316bb644d7642c92926cdf9a69528e35062c6e64df0b17ae0da-primary.sqlite.bz2 from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/altarch/7/os/ppc64le/repodata/7fcd43b0eb8c1316bb644d7642c92926cdf9a69528e35062c6e64df0b17ae0da-primary.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
[root@admin ~]#
百度了网上说这是私人仓库
centos7 – 在私人仓库中找不到primary.sqlite.bz2
[root@admin mysql-5.7.16]# cd /etc
[root@admin etc]# ll
......
drwxr-xr-x. 6 root root 100 Oct 24 10:53 yum
-rw-r--r--. 1 root root 970 Aug 8 19:57 yum.conf
drwxr-xr-x. 2 root root 187 Nov 22 17:17 yum.repos.d
[root@admin etc]# cat yum.conf
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=23&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
[root@admin etc]#
网上说
解决方案很简单,避免客户端保留repos的本地缓存.
这可以在/etc/yum.conf客户端文件中完成,包括下一行：
http_caching=none
设置此选项后,每次客户端执行yum updateor yum repolist时,
它都会从存储库服务器下载所有repodata,因此所有文件都在其上一个版本中.
----------------------------------
加上 http_caching=none 这一句
[root@admin etc]# vi yum.conf
[root@admin etc]#
[root@admin etc]# cat yum.conf
[main]
cachedir=/var/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/var/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=23&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
http_caching=none
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
[root@admin etc]#
也不行
等等
[root@admin ~]# yum clean all
Loaded plugins: fastestmirror
Cleaning repos: base extras updates
Cleaning up list of fastest mirrors
[root@admin ~]#
[root@admin ~]# ll /var/cahe/yum
ls: cannot access /var/cahe/yum: No such file or directory
[root@admin ~]#
[root@admin ~]# ll /var/cache/yum
total 0
drwxr-xr-x. 3 root root 15 Oct 24 11:10 ppc64le
[root@admin ~]#
[root@admin ~]# cat ppc64le
cat: ppc64le: No such file or directory
[root@admin ~]#
[root@admin ~]# cd /var/cache/yum
[root@admin yum]#
[root@admin yum]# ll
total 0
drwxr-xr-x. 3 root root 15 Oct 24 11:10 ppc64le
[root@admin yum]#
[root@admin yum]# cd ppc64le/
[root@admin ppc64le]# ll
total 0
drwxr-xr-x. 10 root root 217 Nov 22 17:58 7
[root@admin ppc64le]#
[root@admin ppc64le]# cd 7
[root@admin 7]# ll
total 4
drwxr-xr-x. 4 root root 33 Nov 22 17:58 base
drwxr-xr-x. 4 root root 97 Nov 22 12:23 epel
drwxr-xr-x. 4 root root 33 Nov 22 17:58 extras
drwxr-xr-x. 4 root root 33 Nov 22 12:04 mysql57-community
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql80-community
drwxr-xr-x. 4 root root 33 Nov 22 12:23 mysql-connectors-community
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql-tools-community
-rw-r--r--. 1 root root 37 Nov 22 17:56 timedhosts
drwxr-xr-x. 4 root root 33 Nov 22 17:58 updates
[root@admin 7]#
[root@admin 7]# cd mysql57-community/
[root@admin mysql57-community]# ll
total 0
drwxr-xr-x. 2 root root 6 Nov 22 12:04 gen
drwxr-xr-x. 2 root root 6 Nov 22 12:04 packages
[root@admin mysql57-community]# cd packages/
[root@admin packages]# ls
[root@admin packages]# cd ..
[root@admin mysql57-community]#
[root@admin mysql57-community]# cd ..
[root@admin 7]#
[root@admin 7]# ls
base extras mysql80-community mysql-tools-community updates
epel mysql57-community mysql-connectors-community timedhosts
[root@admin 7]#
[root@admin 7]# ll
total 4
drwxr-xr-x. 4 root root 33 Nov 22 17:58 base
drwxr-xr-x. 4 root root 97 Nov 22 12:23 epel
drwxr-xr-x. 4 root root 33 Nov 22 17:58 extras
drwxr-xr-x. 4 root root 33 Nov 22 12:04 mysql57-community
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql80-community
drwxr-xr-x. 4 root root 33 Nov 22 12:23 mysql-connectors-community
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql-tools-community
-rw-r--r--. 1 root root 37 Nov 22 17:56 timedhosts
drwxr-xr-x. 4 root root 33 Nov 22 17:58 updates
[root@admin 7]#
[root@admin 7]# pwd
/var/cache/yum/ppc64le/7
[root@admin 7]#
[root@admin 7]# rm -rf /var/cache/yum/ppc64le/7/mysql57-community/
[root@admin 7]#
[root@admin 7]# ll
total 4
drwxr-xr-x. 4 root root 33 Nov 22 17:58 base
drwxr-xr-x. 4 root root 97 Nov 22 12:23 epel
drwxr-xr-x. 4 root root 33 Nov 22 17:58 extras
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql80-community
drwxr-xr-x. 4 root root 33 Nov 22 12:23 mysql-connectors-community
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql-tools-community
-rw-r--r--. 1 root root 37 Nov 22 17:56 timedhosts
drwxr-xr-x. 4 root root 33 Nov 22 17:58 updates
[root@admin 7]#
[root@admin 7]#
[root@admin 7]# cd mysql80-community/
[root@admin mysql80-community]# ll
total 0
drwxr-xr-x. 2 root root 6 Nov 22 11:55 gen
drwxr-xr-x. 2 root root 6 Nov 22 11:55 packages
[root@admin mysql80-community]# cd ..
[root@admin 7]# rm -rf /var/cache/yum/ppc64le/7/mysql80-community/
[root@admin 7]# ll
total 4
drwxr-xr-x. 4 root root 33 Nov 22 17:58 base
drwxr-xr-x. 4 root root 97 Nov 22 12:23 epel
drwxr-xr-x. 4 root root 33 Nov 22 17:58 extras
drwxr-xr-x. 4 root root 33 Nov 22 12:23 mysql-connectors-community
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql-tools-community
-rw-r--r--. 1 root root 37 Nov 22 17:56 timedhosts
drwxr-xr-x. 4 root root 33 Nov 22 17:58 updates
[root@admin 7]#
[root@admin 7]# cd mysql-connectors-community/
[root@admin mysql-connectors-community]# ll
total 0
drwxr-xr-x. 2 root root 6 Nov 22 11:55 gen
drwxr-xr-x. 2 root root 6 Nov 22 11:55 packages
[root@admin mysql-connectors-community]#
[root@admin mysql-connectors-community]# cd ..
[root@admin 7]# rm -rf /var/cache/yum/ppc64le/7/mysql-connectors-community/
[root@admin 7]# ll
total 4
drwxr-xr-x. 4 root root 33 Nov 22 17:58 base
drwxr-xr-x. 4 root root 97 Nov 22 12:23 epel
drwxr-xr-x. 4 root root 33 Nov 22 17:58 extras
drwxr-xr-x. 4 root root 33 Nov 22 11:55 mysql-tools-community
-rw-r--r--. 1 root root 37 Nov 22 17:56 timedhosts
drwxr-xr-x. 4 root root 33 Nov 22 17:58 updates
[root@admin 7]#
[root@admin 7]# cd mysql-tools-community/
[root@admin mysql-tools-community]# ll
total 0
drwxr-xr-x. 2 root root 6 Nov 22 11:55 gen
drwxr-xr-x. 2 root root 6 Nov 22 11:55 packages
[root@admin mysql-tools-community]# cd ..
[root@admin 7]# rm -rf /var/cache/yum/ppc64le/7/mysql-tools-community/
[root@admin 7]# ll
total 4
drwxr-xr-x. 4 root root 33 Nov 22 17:58 base
drwxr-xr-x. 4 root root 97 Nov 22 12:23 epel
drwxr-xr-x. 4 root root 33 Nov 22 17:58 extras
-rw-r--r--. 1 root root 37 Nov 22 17:56 timedhosts
drwxr-xr-x. 4 root root 33 Nov 22 17:58 updates
[root@admin 7]#
----------------------------------------
等等
[root@admin ~]# yum clean all
Loaded plugins: fastestmirror
Cleaning repos: base extras updates
[root@admin ~]#
[root@admin ~]# rm -rf /var/cache/yum
[root@admin ~]#
[root@admin ~]#
[root@admin ~]# yum repolist
Loaded plugins: fastestmirror
Determining fastest mirrors
base | 3.6 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
(1/4): extras/7/ppc64le/primary_db | 136 kB 00:00:06
(2/4): base/7/ppc64le/group_gz | 165 kB 00:00:35
(3/4): base/7/ppc64le/primary_db | 4.8 MB 00:02:21
(4/4): updates/7/ppc64le/primary_db | 3.7 MB 00:03:33
repo id repo name status
base/7/ppc64le CentOS-7 - Base 7,516
extras/7/ppc64le CentOS-7 - Extras 278
updates/7/ppc64le CentOS-7 - Updates 595
repolist: 8,389
[root@admin ~]#
[root@admin ~]#
---------------------------
-----------------------------
安装依赖
yum -y install make
yum -y install gcc-c++
yum -y install cmake
yum -y install bison
yum -y install bison-devel
yum -y install perl
yum -y install glibc
yum -y install ncurses
yum -y install ncurses-devel
yum -y install ncurses-libs
yum -y install libaio
yum -y install libaio-devel
yum -y install numactl-devel
yum -y install openssl-devel
yum -y install zlib-devel
--------------------------
------------------------
再尝试
[root@admin ~]#
[root@admin ~]# yum -y install make
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package 1:make-3.82-24.el7.ppc64le already installed and latest version
Nothing to do
[root@admin ~]# yum -y install gcc-c++
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.ppc64le 0:4.8.5-39.el7 will be installed
--> Processing Dependency: libstdc++-devel = 4.8.5-39.el7 for package: gcc-c++-4.8.5-39.el7.ppc64le
--> Processing Dependency: gcc = 4.8.5-39.el7 for package: gcc-c++-4.8.5-39.el7.ppc64le
--> Processing Dependency: libmpfr.so.4()(64bit) for package: gcc-c++-4.8.5-39.el7.ppc64le
--> Processing Dependency: libmpc.so.3()(64bit) for package: gcc-c++-4.8.5-39.el7.ppc64le
--> Running transaction check
---> Package gcc.ppc64le 0:4.8.5-39.el7 will be installed
--> Processing Dependency: cpp = 4.8.5-39.el7 for package: gcc-4.8.5-39.el7.ppc64le
--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.8.5-39.el7.ppc64le
--> Processing Dependency: libatomic.so.1()(64bit) for package: gcc-4.8.5-39.el7.ppc64le
---> Package libmpc.ppc64le 0:1.0.1-3.el7 will be installed
---> Package libstdc++-devel.ppc64le 0:4.8.5-39.el7 will be installed
---> Package mpfr.ppc64le 0:3.1.1-4.el7 will be installed
--> Running transaction check
---> Package cpp.ppc64le 0:4.8.5-39.el7 will be installed
---> Package glibc-devel.ppc64le 0:2.17-292.el7 will be installed
--> Processing Dependency: glibc-headers = 2.17-292.el7 for package: glibc-devel-2.17-292.el7.ppc64le
--> Processing Dependency: glibc-headers for package: glibc-devel-2.17-292.el7.ppc64le
---> Package libatomic.ppc64le 0:4.8.5-39.el7 will be installed
--> Running transaction check
---> Package glibc-headers.ppc64le 0:2.17-292.el7 will be installed
--> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.17-292.el7.ppc64le
--> Processing Dependency: kernel-headers for package: glibc-headers-2.17-292.el7.ppc64le
--> Running transaction check
---> Package kernel-headers.ppc64le 0:3.10.0-1062.4.3.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
====================================================================================================
Package Arch Version Repository Size
====================================================================================================
Installing:
gcc-c++ ppc64le 4.8.5-39.el7 base 8.2 M
Installing for dependencies:
cpp ppc64le 4.8.5-39.el7 base 6.9 M
gcc ppc64le 4.8.5-39.el7 base 15 M
glibc-devel ppc64le 2.17-292.el7 base 1.1 M
glibc-headers ppc64le 2.17-292.el7 base 676 k
kernel-headers ppc64le 3.10.0-1062.4.3.el7 updates 8.7 M
libatomic ppc64le 4.8.5-39.el7 base 50 k
libmpc ppc64le 1.0.1-3.el7 base 51 k
libstdc++-devel ppc64le 4.8.5-39.el7 base 1.5 M
mpfr ppc64le 3.1.1-4.el7 base 210 k
Transaction Summary
====================================================================================================
Install 1 Package (+9 Dependent packages)
Total download size: 42 M
Installed size: 90 M
Downloading packages:
(1/10): cpp-4.8.5-39.el7.ppc64le.rpm 4% [===- ] 33 kB/s | 2.0 MB 0(1/10): cpp-4.8.5-39.el7.ppc64le.rpm 4% [===- ] 32 kB/s | 2.1 MB 0(1/10): cpp-4.8.5-39.el7.ppc64le.rpm | 6.9 MB 00:06:39
(2/10): gcc-4.8.5-39.el7.ppc64le.rpm | 15 MB 00:15:39
(3/10): glibc-devel-2.17-292.el7.ppc64le.rpm | 1.1 MB 00:00:51
(4/10): gcc-c++-4.8.5-39.el7.ppc64le.rpm | 8.2 MB 00:10:10
(5/10): libatomic-4.8.5-39.el7.ppc64le.rpm | 50 kB 00:00:06
(6/10): libmpc-1.0.1-3.el7.ppc64le.rpm | 51 kB 00:00:00
(7/10): glibc-headers-2.17-292.el7.ppc64le.rpm | 676 kB 00:00:40
(8/10): mpfr-3.1.1-4.el7.ppc64le.rpm | 210 kB 00:00:10
(9/10): libstdc++-devel-4.8.5-39.el7.ppc64le.rpm | 1.5 MB 00:01:59
(10/10): kernel-headers-3.10.0-1062.4.3.el7.ppc64le.rpm | 8.7 MB 00:09:50
--------------------------------------------------------------------------------------------------------
Total 27 kB/s | 42 MB 00:26:21
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Warning: RPMDB altered outside of yum.
Installing : mpfr-3.1.1-4.el7.ppc64le 1/10
Installing : libmpc-1.0.1-3.el7.ppc64le 2/10
Installing : cpp-4.8.5-39.el7.ppc64le 3/10
Installing : libatomic-4.8.5-39.el7.ppc64le 4/10
Installing : libstdc++-devel-4.8.5-39.el7.ppc64le 5/10
Installing : kernel-headers-3.10.0-1062.4.3.el7.ppc64le 6/10
Installing : glibc-headers-2.17-292.el7.ppc64le 7/10
Installing : glibc-devel-2.17-292.el7.ppc64le 8/10
Installing : gcc-4.8.5-39.el7.ppc64le 9/10
Installing : gcc-c++-4.8.5-39.el7.ppc64le 10/10
Verifying : cpp-4.8.5-39.el7.ppc64le 1/10
Verifying : kernel-headers-3.10.0-1062.4.3.el7.ppc64le 2/10
Verifying : libstdc++-devel-4.8.5-39.el7.ppc64le 3/10
Verifying : gcc-4.8.5-39.el7.ppc64le 4/10
Verifying : glibc-devel-2.17-292.el7.ppc64le 5/10
Verifying : glibc-headers-2.17-292.el7.ppc64le 6/10
Verifying : libmpc-1.0.1-3.el7.ppc64le 7/10
Verifying : gcc-c++-4.8.5-39.el7.ppc64le 8/10
Verifying : libatomic-4.8.5-39.el7.ppc64le 9/10
Verifying : mpfr-3.1.1-4.el7.ppc64le 10/10
Installed:
gcc-c++.ppc64le 0:4.8.5-39.el7
Dependency Installed:
cpp.ppc64le 0:4.8.5-39.el7 gcc.ppc64le 0:4.8.5-39.el7
glibc-devel.ppc64le 0:2.17-292.el7 glibc-headers.ppc64le 0:2.17-292.el7
kernel-headers.ppc64le 0:3.10.0-1062.4.3.el7 libatomic.ppc64le 0:4.8.5-39.el7
libmpc.ppc64le 0:1.0.1-3.el7 libstdc++-devel.ppc64le 0:4.8.5-39.el7
mpfr.ppc64le 0:3.1.1-4.el7
Complete!
[root@admin ~]#
------------------------------
成功了
yum -y install cmake
[root@admin ~]# yum -y install cmake
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package cmake.ppc64le 0:2.8.12.2-2.el7 will be installed
--> Processing Dependency: libarchive.so.13()(64bit) for package: cmake-2.8.12.2-2.el7.ppc64le
--> Running transaction check
---> Package libarchive.ppc64le 0:3.1.2-12.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
cmake ppc64le 2.8.12.2-2.el7 base 6.9 M
Installing for dependencies:
libarchive ppc64le 3.1.2-12.el7 base 325 k
Transaction Summary
========================================================================================================
Install 1 Package (+1 Dependent package)
Total download size: 7.2 M
Installed size: 30 M
Downloading packages:
(1/2): libarchive-3.1.2-12.el7.ppc64le.rpm | 325 kB 00:00:51
(2/2): cmake-2.8.12.2-2.el7.ppc64le.rpm | 6.9 MB 00:04:40
--------------------------------------------------------------------------------------------------------
Total 26 kB/s | 7.2 MB 00:04:40
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : libarchive-3.1.2-12.el7.ppc64le 1/2
Installing : cmake-2.8.12.2-2.el7.ppc64le 2/2
Verifying : libarchive-3.1.2-12.el7.ppc64le 1/2
Verifying : cmake-2.8.12.2-2.el7.ppc64le 2/2
Installed:
cmake.ppc64le 0:2.8.12.2-2.el7
Dependency Installed:
libarchive.ppc64le 0:3.1.2-12.el7
Complete!
[root@admin ~]#
---------------------------------
安装成功了，下面 yum -y install bison
[root@admin ~]# yum -y install bison
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package bison.ppc64le 0:3.0.4-2.el7 will be installed
--> Processing Dependency: m4 >= 1.4 for package: bison-3.0.4-2.el7.ppc64le
--> Running transaction check
---> Package m4.ppc64le 0:1.4.16-10.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
bison ppc64le 3.0.4-2.el7 base 670 k
Installing for dependencies:
m4 ppc64le 1.4.16-10.el7 base 256 k
Transaction Summary
========================================================================================================
Install 1 Package (+1 Dependent package)
Total download size: 926 k
Installed size: 2.7 M
Downloading packages:
(1/2): m4-1.4.16-10.el7.ppc64le.rpm | 256 kB 00:00:08
(2/2): bison-3.0.4-2.el7.ppc64le.rpm | 670 kB 00:00:56
--------------------------------------------------------------------------------------------------------
Total 16 kB/s | 926 kB 00:00:56
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : m4-1.4.16-10.el7.ppc64le 1/2
Installing : bison-3.0.4-2.el7.ppc64le 2/2
Verifying : bison-3.0.4-2.el7.ppc64le 1/2
Verifying : m4-1.4.16-10.el7.ppc64le 2/2
Installed:
bison.ppc64le 0:3.0.4-2.el7
Dependency Installed:
m4.ppc64le 0:1.4.16-10.el7
Complete!
[root@admin ~]#
-------------------------------
安装
yum -y install bison-devel
[root@admin ~]#
[root@admin ~]# yum -y install bison-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package bison-devel.ppc64le 0:3.0.4-2.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
bison-devel ppc64le 3.0.4-2.el7 base 23 k
Transaction Summary
========================================================================================================
Install 1 Package
Total download size: 23 k
Installed size: 38 k
Downloading packages:
bison-devel-3.0.4-2.el7.ppc64le.rpm | 23 kB 00:00:02
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : bison-devel-3.0.4-2.el7.ppc64le 1/1
Verifying : bison-devel-3.0.4-2.el7.ppc64le 1/1
Installed:
bison-devel.ppc64le 0:3.0.4-2.el7
Complete!
[root@admin ~]#
-----------------------------
安装
yum -y install perl
[root@admin ~]# yum -y install perl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package perl.ppc64le 4:5.16.3-294.el7_6 will be installed
--> Processing Dependency: perl-libs = 4:5.16.3-294.el7_6 for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl-macros for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl-libs for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Getopt::Long) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(File::Temp) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(File::Path) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Exporter) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Processing Dependency: libperl.so()(64bit) for package: 4:perl-5.16.3-294.el7_6.ppc64le
--> Running transaction check
---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
---> Package perl-Filter.ppc64le 0:1.49-3.el7 will be installed
---> Package perl-Getopt-Long.noarch 0:2.40-3.el7 will be installed
--> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-3.el7.noarch
--> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-3.el7.noarch
---> Package perl-PathTools.ppc64le 0:3.40-5.el7 will be installed
---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
--> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
--> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
---> Package perl-Scalar-List-Utils.ppc64le 0:1.27-248.el7 will be installed
---> Package perl-Socket.ppc64le 0:2.010-4.el7 will be installed
---> Package perl-Storable.ppc64le 0:2.45-3.el7 will be installed
---> Package perl-Time-HiRes.ppc64le 4:1.9725-3.el7 will be installed
---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
---> Package perl-libs.ppc64le 4:5.16.3-294.el7_6 will be installed
---> Package perl-macros.ppc64le 4:5.16.3-294.el7_6 will be installed
---> Package perl-threads.ppc64le 0:1.87-4.el7 will be installed
---> Package perl-threads-shared.ppc64le 0:1.43-6.el7 will be installed
--> Running transaction check
---> Package perl-Encode.ppc64le 0:2.51-7.el7 will be installed
---> Package perl-Pod-Escapes.noarch 1:1.04-294.el7_6 will be installed
---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
--> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
--> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
--> Running transaction check
---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
--> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
--> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
--> Running transaction check
---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
perl ppc64le 4:5.16.3-294.el7_6 base 7.9 M
Installing for dependencies:
perl-Carp noarch 1.26-244.el7 base 19 k
perl-Encode ppc64le 2.51-7.el7 base 1.5 M
perl-Exporter noarch 5.68-3.el7 base 28 k
perl-File-Path noarch 2.09-2.el7 base 26 k
perl-File-Temp noarch 0.23.01-3.el7 base 56 k
perl-Filter ppc64le 1.49-3.el7 base 77 k
perl-Getopt-Long noarch 2.40-3.el7 base 56 k
perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
perl-PathTools ppc64le 3.40-5.el7 base 82 k
perl-Pod-Escapes noarch 1:1.04-294.el7_6 base 51 k
perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
perl-Pod-Usage noarch 1.63-3.el7 base 27 k
perl-Scalar-List-Utils ppc64le 1.27-248.el7 base 36 k
perl-Socket ppc64le 2.010-4.el7 base 48 k
perl-Storable ppc64le 2.45-3.el7 base 76 k
perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
perl-Time-HiRes ppc64le 4:1.9725-3.el7 base 45 k
perl-Time-Local noarch 1.2300-2.el7 base 24 k
perl-constant noarch 1.27-2.el7 base 19 k
perl-libs ppc64le 4:5.16.3-294.el7_6 base 679 k
perl-macros ppc64le 4:5.16.3-294.el7_6 base 43 k
perl-parent noarch 1:0.225-244.el7 base 12 k
perl-podlators noarch 2.5.1-3.el7 base 112 k
perl-threads ppc64le 1.87-4.el7 base 49 k
perl-threads-shared ppc64le 1.43-6.el7 base 39 k
Transaction Summary
========================================================================================================
Install 1 Package (+26 Dependent packages)
Total download size: 11 M
Installed size: 39 M
Downloading packages:
(1/27): perl-Carp-1.26-244.el7.noarch.rpm | 19 kB 00:00:01
(2/27): perl-Encode-2.51-7.el7.ppc64le.rpm | 1.5 MB 00:02:38
(3/27): perl-Exporter-5.68-3.el7.noarch.rpm | 28 kB 00:00:03
(4/27): perl-File-Path-2.09-2.el7.noarch.rpm | 26 kB 00:00:04
(5/27): perl-File-Temp-0.23.01-3.el7.noarch.rpm | 56 kB 00:00:09
(6/27): perl-Filter-1.49-3.el7.ppc64le.rpm | 77 kB 00:00:03
(7/27): perl-Getopt-Long-2.40-3.el7.noarch.rpm | 56 kB 00:00:07
(8/27): perl-HTTP-Tiny-0.033-3.el7.noarch.rpm | 38 kB 00:00:03
(9/27): perl-PathTools-3.40-5.el7.ppc64le.rpm | 82 kB 00:00:11
(10/27): perl-Pod-Escapes-1.04-294.el7_6.noarch.rpm | 51 kB 00:00:05
(11/27): perl-Pod-Perldoc-3.20-4.el7.noarch.rpm | 87 kB 00:00:05
(12/27): perl-Pod-Simple-3.28-4.el7.noarch.rpm | 216 kB 00:00:26
(13/27): perl-Pod-Usage-1.63-3.el7.noarch.rpm | 27 kB 00:00:02
(14/27): perl-Scalar-List-Utils-1.27-248.el7.ppc64le.rpm | 36 kB 00:00:03
(15/27): perl-Socket-2.010-4.el7.ppc64le.rpm | 48 kB 00:00:04
(16/27): perl-Storable-2.45-3.el7.ppc64le.rpm | 76 kB 00:00:06
(17/27): perl-Text-ParseWords-3.29-4.el7.noarch.rpm | 14 kB 00:00:00
(18/27): perl-Time-HiRes-1.9725-3.el7.ppc64le.rpm | 45 kB 00:00:02
(19/27): perl-Time-Local-1.2300-2.el7.noarch.rpm | 24 kB 00:00:02
(20/27): perl-constant-1.27-2.el7.noarch.rpm | 19 kB 00:00:03
(21/27): perl-libs-5.16.3-294.el7_6.ppc64le.rpm | 679 kB 00:01:09
(22/27): perl-macros-5.16.3-294.el7_6.ppc64le.rpm | 43 kB 00:00:07
(23/27): perl-parent-0.225-244.el7.noarch.rpm | 12 kB 00:00:04
(24/27): perl-podlators-2.5.1-3.el7.noarch.rpm | 112 kB 00:00:18
(25/27): perl-threads-1.87-4.el7.ppc64le.rpm | 49 kB 00:00:01
(26/27): perl-threads-shared-1.43-6.el7.ppc64le.rpm | 39 kB 00:00:03
(27/27): perl-5.16.3-294.el7_6.ppc64le.rpm | 7.9 MB 00:15:19
--------------------------------------------------------------------------------------------------------
Total 13 kB/s | 11 MB 00:15:19
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : 1:perl-parent-0.225-244.el7.noarch 1/27
Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 2/27
Installing : perl-podlators-2.5.1-3.el7.noarch 3/27
Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 4/27
Installing : 1:perl-Pod-Escapes-1.04-294.el7_6.noarch 5/27
Installing : perl-Encode-2.51-7.el7.ppc64le 6/27
Installing : perl-Text-ParseWords-3.29-4.el7.noarch 7/27
Installing : perl-Pod-Usage-1.63-3.el7.noarch 8/27
Installing : perl-Exporter-5.68-3.el7.noarch 9/27
Installing : perl-constant-1.27-2.el7.noarch 10/27
Installing : perl-Socket-2.010-4.el7.ppc64le 11/27
Installing : perl-PathTools-3.40-5.el7.ppc64le 12/27
Installing : perl-Scalar-List-Utils-1.27-248.el7.ppc64le 13/27
Installing : perl-Storable-2.45-3.el7.ppc64le 14/27
Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 15/27
Installing : perl-Time-Local-1.2300-2.el7.noarch 16/27
Installing : perl-threads-1.87-4.el7.ppc64le 17/27
Installing : perl-Carp-1.26-244.el7.noarch 18/27
Installing : perl-Filter-1.49-3.el7.ppc64le 19/27
Installing : 4:perl-macros-5.16.3-294.el7_6.ppc64le 20/27
Installing : perl-File-Temp-0.23.01-3.el7.noarch 21/27
Installing : perl-File-Path-2.09-2.el7.noarch 22/27
Installing : perl-threads-shared-1.43-6.el7.ppc64le 23/27
Installing : 4:perl-libs-5.16.3-294.el7_6.ppc64le 24/27
Installing : 4:perl-Time-HiRes-1.9725-3.el7.ppc64le 25/27
Installing : perl-Getopt-Long-2.40-3.el7.noarch 26/27
Installing : 4:perl-5.16.3-294.el7_6.ppc64le 27/27
Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/27
Verifying : perl-PathTools-3.40-5.el7.ppc64le 2/27
Verifying : 1:perl-Pod-Escapes-1.04-294.el7_6.noarch 3/27
Verifying : perl-Exporter-5.68-3.el7.noarch 4/27
Verifying : perl-constant-1.27-2.el7.noarch 5/27
Verifying : perl-Encode-2.51-7.el7.ppc64le 6/27
Verifying : perl-Socket-2.010-4.el7.ppc64le 7/27
Verifying : perl-File-Temp-0.23.01-3.el7.noarch 8/27
Verifying : perl-Scalar-List-Utils-1.27-248.el7.ppc64le 9/27
Verifying : 1:perl-parent-0.225-244.el7.noarch 10/27
Verifying : perl-Storable-2.45-3.el7.ppc64le 11/27
Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 12/27
Verifying : perl-Time-Local-1.2300-2.el7.noarch 13/27
Verifying : perl-threads-1.87-4.el7.ppc64le 14/27
Verifying : 4:perl-5.16.3-294.el7_6.ppc64le 15/27
Verifying : perl-Carp-1.26-244.el7.noarch 16/27
Verifying : perl-Filter-1.49-3.el7.ppc64le 17/27
Verifying : 4:perl-macros-5.16.3-294.el7_6.ppc64le 18/27
Verifying : perl-Pod-Usage-1.63-3.el7.noarch 19/27
Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 20/27
Verifying : perl-podlators-2.5.1-3.el7.noarch 21/27
Verifying : perl-File-Path-2.09-2.el7.noarch 22/27
Verifying : perl-threads-shared-1.43-6.el7.ppc64le 23/27
Verifying : 4:perl-libs-5.16.3-294.el7_6.ppc64le 24/27
Verifying : perl-Getopt-Long-2.40-3.el7.noarch 25/27
Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 26/27
Verifying : 4:perl-Time-HiRes-1.9725-3.el7.ppc64le 27/27
Installed:
perl.ppc64le 4:5.16.3-294.el7_6
Dependency Installed:
perl-Carp.noarch 0:1.26-244.el7 perl-Encode.ppc64le 0:2.51-7.el7
perl-Exporter.noarch 0:5.68-3.el7 perl-File-Path.noarch 0:2.09-2.el7
perl-File-Temp.noarch 0:0.23.01-3.el7 perl-Filter.ppc64le 0:1.49-3.el7
perl-Getopt-Long.noarch 0:2.40-3.el7 perl-HTTP-Tiny.noarch 0:0.033-3.el7
perl-PathTools.ppc64le 0:3.40-5.el7 perl-Pod-Escapes.noarch 1:1.04-294.el7_6
perl-Pod-Perldoc.noarch 0:3.20-4.el7 perl-Pod-Simple.noarch 1:3.28-4.el7
perl-Pod-Usage.noarch 0:1.63-3.el7 perl-Scalar-List-Utils.ppc64le 0:1.27-248.el7
perl-Socket.ppc64le 0:2.010-4.el7 perl-Storable.ppc64le 0:2.45-3.el7
perl-Text-ParseWords.noarch 0:3.29-4.el7 perl-Time-HiRes.ppc64le 4:1.9725-3.el7
perl-Time-Local.noarch 0:1.2300-2.el7 perl-constant.noarch 0:1.27-2.el7
perl-libs.ppc64le 4:5.16.3-294.el7_6 perl-macros.ppc64le 4:5.16.3-294.el7_6
perl-parent.noarch 1:0.225-244.el7 perl-podlators.noarch 0:2.5.1-3.el7
perl-threads.ppc64le 0:1.87-4.el7 perl-threads-shared.ppc64le 0:1.43-6.el7
Complete!
[root@admin ~]#
安装成功
----------------------
安装
yum -y install glibc
[root@admin ~]#
[root@admin ~]# yum -y install glibc
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package glibc-2.17-292.el7.ppc64le already installed and latest version
Nothing to do
[root@admin ~]#
安装成功
----------------------
安装
yum -y install ncurses
[root@admin ~]#
[root@admin ~]# yum -y install ncurses
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package ncurses-5.9-14.20130511.el7_4.ppc64le already installed and latest version
Nothing to do
[root@admin ~]#
安装成功
----------------------
安装
yum -y install ncurses-devel
[root@admin ~]#
[root@admin ~]# yum -y install ncurses-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package ncurses-devel.ppc64le 0:5.9-14.20130511.el7_4 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
ncurses-devel ppc64le 5.9-14.20130511.el7_4 base 712 k
Transaction Summary
========================================================================================================
Install 1 Package
Total download size: 712 k
Installed size: 2.1 M
Downloading packages:
ncurses-devel-5.9-14.20130511.el7_4.ppc64le.rpm | 712 kB 00:01:59
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : ncurses-devel-5.9-14.20130511.el7_4.ppc64le 1/1
Verifying : ncurses-devel-5.9-14.20130511.el7_4.ppc64le 1/1
Installed:
ncurses-devel.ppc64le 0:5.9-14.20130511.el7_4
Complete!
[root@admin ~]#
安装成功
----------------------
安装
yum -y install ncurses-libs
[root@admin ~]#
[root@admin ~]# yum -y install ncurses-libs
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package ncurses-libs-5.9-14.20130511.el7_4.ppc64le already installed and latest version
Nothing to do
[root@admin ~]#
成功安装
----------------------
安装
yum -y install libaio
[root@admin ~]#
[root@admin ~]# yum -y install libaio
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package libaio-0.3.109-13.el7.ppc64le already installed and latest version
Nothing to do
[root@admin ~]#
安装成功
----------------------
安装
yum -y install libaio-devel
[root@admin ~]#
[root@admin ~]# yum -y install libaio-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package libaio-devel.ppc64le 0:0.3.109-13.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
libaio-devel ppc64le 0.3.109-13.el7 base 12 k
Transaction Summary
========================================================================================================
Install 1 Package
Total download size: 12 k
Installed size: 7.8 k
Downloading packages:
libaio-devel-0.3.109-13.el7.ppc64le.rpm | 12 kB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : libaio-devel-0.3.109-13.el7.ppc64le 1/1
Verifying : libaio-devel-0.3.109-13.el7.ppc64le 1/1
Installed:
libaio-devel.ppc64le 0:0.3.109-13.el7
Complete!
[root@admin ~]#
安装成功
----------------------
安装
yum -y install numactl-devel
[root@admin ~]#
[root@admin ~]# yum -y install numactl-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package numactl-devel.ppc64le 0:2.0.12-3.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
numactl-devel ppc64le 2.0.12-3.el7 base 23 k
Transaction Summary
========================================================================================================
Install 1 Package
Total download size: 23 k
Installed size: 25 k
Downloading packages:
numactl-devel-2.0.12-3.el7.ppc64le.rpm | 23 kB 00:00:08
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : numactl-devel-2.0.12-3.el7.ppc64le 1/1
Verifying : numactl-devel-2.0.12-3.el7.ppc64le 1/1
Installed:
numactl-devel.ppc64le 0:2.0.12-3.el7
Complete!
[root@admin ~]#
安装成功
----------------------
安装
yum -y install openssl-devel
[root@admin ~]#
[root@admin ~]# yum -y install openssl-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package openssl-devel.ppc64le 1:1.0.2k-19.el7 will be installed
--> Processing Dependency: zlib-devel(ppc-64) for package: 1:openssl-devel-1.0.2k-19.el7.ppc64le
--> Processing Dependency: krb5-devel(ppc-64) for package: 1:openssl-devel-1.0.2k-19.el7.ppc64le
--> Running transaction check
---> Package krb5-devel.ppc64le 0:1.15.1-37.el7_7.2 will be installed
--> Processing Dependency: libkadm5(ppc-64) = 1.15.1-37.el7_7.2 for package: krb5-devel-1.15.1-37.el7_7.2.ppc64le
--> Processing Dependency: krb5-libs(ppc-64) = 1.15.1-37.el7_7.2 for package: krb5-devel-1.15.1-37.el7_7.2.ppc64le
--> Processing Dependency: libverto-devel for package: krb5-devel-1.15.1-37.el7_7.2.ppc64le
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.15.1-37.el7_7.2.ppc64le
--> Processing Dependency: libcom_err-devel for package: krb5-devel-1.15.1-37.el7_7.2.ppc64le
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.15.1-37.el7_7.2.ppc64le
---> Package zlib-devel.ppc64le 0:1.2.7-18.el7 will be installed
--> Running transaction check
---> Package keyutils-libs-devel.ppc64le 0:1.5.8-3.el7 will be installed
---> Package krb5-libs.ppc64le 0:1.15.1-37.el7_6 will be updated
---> Package krb5-libs.ppc64le 0:1.15.1-37.el7_7.2 will be an update
---> Package libcom_err-devel.ppc64le 0:1.42.9-16.el7 will be installed
---> Package libkadm5.ppc64le 0:1.15.1-37.el7_7.2 will be installed
---> Package libselinux-devel.ppc64le 0:2.5-14.1.el7 will be installed
--> Processing Dependency: libsepol-devel(ppc-64) >= 2.5-10 for package: libselinux-devel-2.5-14.1.el7.ppc64le
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.5-14.1.el7.ppc64le
--> Processing Dependency: pkgconfig(libpcre) for package: libselinux-devel-2.5-14.1.el7.ppc64le
---> Package libverto-devel.ppc64le 0:0.2.5-4.el7 will be installed
--> Running transaction check
---> Package libsepol-devel.ppc64le 0:2.5-10.el7 will be installed
---> Package pcre-devel.ppc64le 0:8.32-17.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================
Package Arch Version Repository Size
========================================================================================================
Installing:
openssl-devel ppc64le 1:1.0.2k-19.el7 base 1.5 M
Installing for dependencies:
keyutils-libs-devel ppc64le 1.5.8-3.el7 base 37 k
krb5-devel ppc64le 1.15.1-37.el7_7.2 updates 272 k
libcom_err-devel ppc64le 1.42.9-16.el7 base 31 k
libkadm5 ppc64le 1.15.1-37.el7_7.2 updates 179 k
libselinux-devel ppc64le 2.5-14.1.el7 base 186 k
libsepol-devel ppc64le 2.5-10.el7 base 76 k
libverto-devel ppc64le 0.2.5-4.el7 base 11 k
pcre-devel ppc64le 8.32-17.el7 base 479 k
zlib-devel ppc64le 1.2.7-18.el7 base 49 k
Updating for dependencies:
krb5-libs ppc64le 1.15.1-37.el7_7.2 updates 813 k
Transaction Summary
========================================================================================================
Install 1 Package (+9 Dependent packages)
Upgrade ( 1 Dependent package)
Total download size: 3.6 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
(1/11): libcom_err-devel-1.42.9-16.el7.ppc64le.rpm | 31 kB 00:00:02
(2/11): keyutils-libs-devel-1.5.8-3.el7.ppc64le.rpm | 37 kB 00:00:06
(3/11): krb5-devel-1.15.1-37.el7_7.2.ppc64le.rpm | 272 kB 00:00:51
(4/11): libsepol-devel-2.5-10.el7.ppc64le.rpm | 76 kB 00:00:03
(5/11): libverto-devel-0.2.5-4.el7.ppc64le.rpm | 11 kB 00:00:01
(6/11): libkadm5-1.15.1-37.el7_7.2.ppc64le.rpm | 179 kB 00:00:25
(7/11): libselinux-devel-2.5-14.1.el7.ppc64le.rpm | 186 kB 00:00:34
(8/11): krb5-libs-1.15.1-37.el7_7.2.ppc64le.rpm | 813 kB 00:02:44
(9/11): pcre-devel-8.32-17.el7.ppc64le.rpm | 479 kB 00:01:29
(10/11): zlib-devel-1.2.7-18.el7.ppc64le.rpm | 49 kB 00:00:23
(11/11): openssl-devel-1.0.2k-19.el7.ppc64le.rpm | 1.5 MB 00:03:31
--------------------------------------------------------------------------------------------------------
Total 14 kB/s | 3.6 MB 00:04:27
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : krb5-libs-1.15.1-37.el7_7.2.ppc64le 1/12
Installing : libkadm5-1.15.1-37.el7_7.2.ppc64le 2/12
Installing : keyutils-libs-devel-1.5.8-3.el7.ppc64le 3/12
Installing : libsepol-devel-2.5-10.el7.ppc64le 4/12
Installing : libverto-devel-0.2.5-4.el7.ppc64le 5/12
Installing : libcom_err-devel-1.42.9-16.el7.ppc64le 6/12
Installing : zlib-devel-1.2.7-18.el7.ppc64le 7/12
Installing : pcre-devel-8.32-17.el7.ppc64le 8/12
Installing : libselinux-devel-2.5-14.1.el7.ppc64le 9/12
Installing : krb5-devel-1.15.1-37.el7_7.2.ppc64le 10/12
Installing : 1:openssl-devel-1.0.2k-19.el7.ppc64le 11/12
Cleanup : krb5-libs-1.15.1-37.el7_6.ppc64le 12/12
Verifying : libkadm5-1.15.1-37.el7_7.2.ppc64le 1/12
Verifying : pcre-devel-8.32-17.el7.ppc64le 2/12
Verifying : 1:openssl-devel-1.0.2k-19.el7.ppc64le 3/12
Verifying : zlib-devel-1.2.7-18.el7.ppc64le 4/12
Verifying : libcom_err-devel-1.42.9-16.el7.ppc64le 5/12
Verifying : libverto-devel-0.2.5-4.el7.ppc64le 6/12
Verifying : libselinux-devel-2.5-14.1.el7.ppc64le 7/12
Verifying : krb5-libs-1.15.1-37.el7_7.2.ppc64le 8/12
Verifying : libsepol-devel-2.5-10.el7.ppc64le 9/12
Verifying : krb5-devel-1.15.1-37.el7_7.2.ppc64le 10/12
Verifying : keyutils-libs-devel-1.5.8-3.el7.ppc64le 11/12
Verifying : krb5-libs-1.15.1-37.el7_6.ppc64le 12/12
Installed:
openssl-devel.ppc64le 1:1.0.2k-19.el7
Dependency Installed:
keyutils-libs-devel.ppc64le 0:1.5.8-3.el7 krb5-devel.ppc64le 0:1.15.1-37.el7_7.2
libcom_err-devel.ppc64le 0:1.42.9-16.el7 libkadm5.ppc64le 0:1.15.1-37.el7_7.2
libselinux-devel.ppc64le 0:2.5-14.1.el7 libsepol-devel.ppc64le 0:2.5-10.el7
libverto-devel.ppc64le 0:0.2.5-4.el7 pcre-devel.ppc64le 0:8.32-17.el7
zlib-devel.ppc64le 0:1.2.7-18.el7
Dependency Updated:
krb5-libs.ppc64le 0:1.15.1-37.el7_7.2
Complete!
[root@admin ~]#
安装成功
----------------------
安装
yum -y install zlib-devel
[root@admin ~]#
[root@admin ~]# yum -y install zlib-devel
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package zlib-devel-1.2.7-18.el7.ppc64le already installed and latest version
Nothing to do
[root@admin ~]#
安装成功
------------------------------------------------
/usr/mysql/data
/usr/mysql/mysql-5.7.16
cmake -DCMAKE_INSTALL_PREFIX=/home/mysql -DMYSQL_DATADIR=/home/mysql/data -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DMYSQL_TCP_PORT=3306 -DMYSQL_USER=mysql -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/local/boost
cmake -DCMAKE_INSTALL_PREFIX=/usr/mysql -DMYSQL_DATADIR=/usr/mysql/data -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DMYSQL_TCP_PORT=3306 -DMYSQL_USER=mysql -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/mysql/boost
失败
见下
带boost的mysql源码安装
