How to install Raspbian Buster on the Raspberry Pi 4
With the new Raspberry Pi 4 motherboards come out, learn how to use Raspbian Buster set up your operating system.
Your new Pi 4 to the mailbox, you have set the desk, you are ready to install the operating system.
For beginners and experienced users who, Raspbian to Pi manufacturing provides excellent desktop experience and the perfect starting point for business. The most important thing is, Raspbian Buster is created for Pi 4. Considering these factors, we will mi flash memory card croSD on this operating system, install it on the new Pi.
If this is your first time using the Raspberry Pi, consider using NOOBS start.
Download Raspbian Buster
First, visit Raspbian download page, download the latest version Raspbian Buster image file (.img).
Desktop + recommended software version comes with everything needed to start processing most of the projects, so I recommended for beginners. If you do not need more than simple desktop, the second option is the best. If you plan to run your Pi headless settings, you might not even need a desktop, you should download a third option.
After downloading the operating system, you can continue to the next step.
Flashing SD card
For this step, you will need to download the OS etched software. Although Pi FoundA Raspberry Ti ON recommended Etcher, but I recommend using Win32DiskImager for Windows users. The latest version of Etcher my mess a few SD card, support team does not help.
When downloading etching OS software, please continue to unzip your downloaded Raspbian version. You will find a .img file inside. After extracting the file, copy its position, because the next step will require it.
Win32DiskImager, SD card as the selected device
Open your preferred disk image, and then select your SD card. By carefully check the drive name in the File Explorer, verify that it is your microSD card instead of the other drives.
Note: If you accidentally select the wrong drive, you lose a lot of data.
Once you have confidence in the selection, location please .img file and paste into the program. If you have not copy the address, Win32DiskImager allows you to browse the file. Click the "write", and then wait for the process to complete. It should take less than two minutes, it is free to get up in the meantime. Once this is done, you should receive a "successfully written" message as shown below.
You can now safely eject the microSD card and continue to the final step.
Start Pi 4
The bottom of the flash memory card into the SD slot using the appropriate Pi 4. the USB -C cable insertion Pi, and then connect the monitor and keyboard. You should start to see the colorful splash screen, and then when you first start of Pi, the top right of the screen will display several Raspberry Pi logo.
Raspbian boot significantly faster than NOOBS, because NOOBS more powerful, deliberately delayed start, to provide you with greater choice and installation of replacement windows operating system. After startup, you should see the beautiful default wallpaper and Raspberry Pi setup wizard. Simply follow the instructions on the screen to set the language, location, and network settings.
Congratulations! You have successfully installed the Raspberry Pi 4 a shiny new operating system! If you decide to continue using Raspbian, please read some other operating system is recommended.