① Ruler: CTRL + M do not scale: Shift + C
② define the origin: Reference-Edit-SET LOCATION
③Q: Unit switch
④ node: first electrically. Consumers node
⑤ compilation: the PC
⑥ introduced PCB: Design-the UP
⑦ block segmentation: Place-Drain-Line
⑧ automatic numbering: tools-anootate schematics-retall ----- Update Changes List,
increasing the PCB layout area: PKT- purple line selected regions - and design -
⑨ When prompted the Accept Changes -------- ------- [Excute the OK Changes ------- Board selected Objects from DEFINE-Sharp
9. the setting altium designer pcb default line width
in the design rule is set directly in front of the wiring: design-rules-routing-width , modifications to the inside of the Preferred width, may be further provided in different layers Min, Max, Preferred width.
2. The routing process modified pcb width
selection Place-Line (shortcut PL), press the TAB key, display the dialog box shown in the figure, and may be modified Line Width Current Layer.
3. Bulk editing completing the wiring width
(1) in the blank right-click Find Same Objects, cross line is selected to modify line (right or directly on the line).
(2) such as changing the same width and the same network, it will be Net and right of the Width changed to Same, click OK, select which line you want the good.
(3) Enter the desired Width in the PCB Inspector point then enter.
4. simple modification of a network line width
can click to select the line you want to modify, hold down Shift while selecting multiple lines, hold down Shift, double-click the selected line, the pop-up dialog box, change the line width. Or shortcuts SP, select a network, but you want to hold Shift while, remove the choice of pads. Ibid then change line width.
5. After editing the line width of the wiring of all
open sidebar interface PCB Filter the lower right corner of the PCB-PCB Filter, Iswire enter the transport, i.e., select all the lines, the space about the click, and then press the F11 in Width change the line width you want.
Cutting board 10: keep-out-layer layer, the upper right corner of the first row of the first ruler - selected in the line, Ctrl A Select -Design-Board Sharp ---- Define from select Objects
displayed mm: Double-digital board size - Format selection
11 standard board size: Top Overlay layer -Dimension ----- Place Linear ----
12 is deleted all the post route: Tools- unRoute-all operations performed in the AD9.4. Performing Route-unRoute-all operation in the high version AD17
13. Select Auto Route - ALL. FIG wiring of the entire PCB. Then right corner "Route All" automatic wiring
14. The right and left element (level) is inverted with the mouse click on the selected element, and hold, press X button on the keyboard.
Of the element down (vertical) flip element is selected with a mouse click, and hold press Y key on the keyboard.
That the element is rotated 90 ° counterclockwise with the mouse click on the selected element, and hold press the spacebar.
15. The single-page or multi-page modify part number: 1 Click Tools / Annotate the Schematics.
2. All Click the Reset
3. Click Update Changes List, after prompt [OK]
4. Then we click Excute Changes in new window
161. English input method is switched to state
2. the device is selected, hold the left mouse button and hold element, the mouse cross shape, the device is a movable state.
3. The X or Y on your keyboard to, X is flipped about a horizontal; Y is inverted vertically down
17. install hole
1 is placed on the pad
2. Then uncheck "gilt", click the OK button
18. The first: a display component label: select the components - Right Find Similar Objects ----- Lock String ----- Same ---- Show name ----- true
second: show Component label: Double-click a component ---- the middle column of the hide to remove the check mark - right-label has been displayed - Find Similar Objects ----- String type -same ----- hide --- -true
will hide label components: check the label - right Similar Objects ----- String of the type the Find -same hide ---- ----- false
19. the, PCB board DRC: TOOLS ----- DRC
Note that the error for each prefix, then Design ---- Rules, find the corresponding prefix scope to the minimum value
20. check PCB there drain lines: open PCB, click Report - "Board Information ..., click Report - check the "routing Information" and then click the "Report" button for a moment to show the results of wiring
on the cloth, the following operations if there is no line display there:
this time we go back to the drawing interface PCB, PCB in the lower right corner tab, click on the PCB.
Pop-up screen, click it. This time will come out a lot of the net name.
This time will come out a lot of the net name. We watched Un-Rout ... this column, look for the option value is not zero with the mouse wheel.
Then we all PCB content in the network will be grayed out. We just amplified a little bit to check on it found.
After a few seconds of search, found a location on the site is not connected.
Once connected, we can cancel the check Net, restitution.
Then check the wiring again. This is when you can see all the connections have been completed.
21. After drawing the PCB copper: clicking Select TOP Layer shaded layer next to A, net options selected connected to ground, the mouse cursor changes to a cross, to select the copper cladding region, right complete exit, near the screw hole It does not require copper.
22. Hide copper: Press ctrl + D,
Delete copper: click grounded top layer layer of copper layer. Del right choice, the switching layer to bottom layer,
right click del, or
23. derived silkscreen: Print smart ----- current Document ----- ok ------ other through the TOP overlay layer, other layers Double-click instead hide the full
export schematic and pcb traces: File-smart PDF ---- Top Layer right ----- Properties-Polygons-off ---- color , and finally remove the back of a check mark.
24. Re-add in the new PCB library package: PCB into the library, right-right New arbitrary components
add 25 components in a project library to another library project, first click on the need to copy the library CTRL to select the desired Yuan devices, copy right, then back to the library project now select paste
26. The multi-interface schematic drawings of the construction general plan, to build a schematic.
------ Sheet from hseet the Create Design or H
27. The project was to add other projects pcb library, first add a project, and then add the library project from the inside.
28. PCB pads are not defined re-add a new definition:
Design ----- ---- Nelist the Add-Edit Nets, own a custom line
