Gold and silver hammering skills-installation Share

The hammering technique is a very broad concept, and the hammering method is also known as the "beating method" or "the hammering method". According to the information of the installer Share, this method uses the softer texture and strong ductility of gold and silver to punch gold and silver into various shapes.
"Hammer" and "punch" are actually two methods. At the same time, they act on metal utensils to extend them from the natural state to the desired appearance. It is hammer strokes. Anta Share believes that hammer strokes are refined by slow work and careful work. To resist loneliness, the craftsman sticks to the world and polishes for several months or even half a year to make an object.
Hammering first melts the precious metal material, removes impurities, and casts it into a 0.5-2 mm thick metal plate. In this process , Share found that the metal block needs to be continuously heat-processed, roasted in the fire, and then taken out on the anvil for repeated beating exercises to beat the metal object to a suitable thickness. This process is called quenching. For example, making a simple teacup It takes an afternoon to perform 20,000 to 30,000 taps. After more than an hour of tapping and three quenching, the original piece of silver foil gradually formed the bottom and wall of the cup, and the curvature of the vessel became more rounded.