"Cold crying" is the latest hot word. This year is a cold winter, and there are waves of cold waves in various places. With the use of various heating facilities in winter, social electricity consumption is large, and the current has increased a lot compared to the past, which causes the wire clamp to be prone to overheating, triggering discharge and causing wire breakage and other faults.
In addition, due to the rapid increase in electricity consumption in society, some areas have also experienced a shortage of electricity consumption. The continuous installation of new lines can solve the problem, but now that land resources are limited, it is not wise to continue this plan; it is now based on the size and The proportional relationship of temperature, using the method of "dynamic wire capacity increase", can tap the potential of power transmission while the original transmission line remains unchanged.
To sum up, do a good job in the normal management of wire temperature measurement, establish and improve the line temperature measurement management system, and scientifically grasp the online temperature measurement skills, so that abnormal defects and hidden dangers of power facilities can be discovered in time, and possible accidents can be eliminated in the bud. Status; at the same time, real-time and regular temperature measurement and return of relevant sections of high-load operation, providing the power supply company with temperature data after current changes, and providing data assistance for the scientific "dynamic capacity increase" of subsequent lines, which can improve transmission lines Transmission capacity, alleviating the shortage of electricity in related areas.
Compared with the traditional human-made temperature measurement special patrol, the TLKS-PMG-100D type **transmission line online monitoring (temperature measurement device)** is more accurate. The equipment uses the attached temperature sensor to detect the temperature of the line wire and the temperature of the easy-to-heat fittings. , Environment temperature and humidity and other data are collected, and transmitted back to the monitoring center through 4G/GPRS/WIFI wireless network in real time and regularly. The monitoring center personnel can use mobile phones and computers to view the data numbers and graphs generated by the system.
Finally, through effective temperature measurement operations, the hidden danger of overheating of the transmission line equipment is removed in time, and the temperature measurement data escorts the "dynamic capacity increase" at the same time. (Editor/Teli Kang Xiaohuang)