Go directly to the code:
The first is that the pom file needs to be added:
<!-- 定时器相关包 -->
<dependency>
<groupId>org.quartz-scheduler</groupId>
<artifactId>quartz</artifactId>
<version>2.3.0</version>
</dependency>
Then the configuration file needs to be added:
xmlns:task="http://www.springframework.org/schema/task"
http://www.springframework.org/schema/task
http://www.springframework.org/schema/task/spring-task-3.1.xsd
Then turn on the timer annotation:
<!-- 开启定时器注解 -->
<task:annotation-driven/>
Then there is the use in the code:
/**
*@description
*@auth panmingshuai
*@time 2018年4月2日下午10:29:09
*
*/
@Component
public class PanTask {
@Autowired
private NothingService nothingService;
// 每五秒执行一次
@Scheduled(cron = "0/5 * * * * ?")
public void TaskJob() {
System.out.println(nothingService.getStr());
}
/**
* cron表达式:
*
* corn从左到右(用空格隔开):秒 分 小时 月份中的日期 月份 星期中的日期 年份
*
* 字段 允许值 允许的特殊字符
* 秒(Seconds) 0~59的整数 , - * /
* 分(Minutes) 0~59的整数 , - * /
* 小时(Hours) 0~23的整数 , - * /
* 日期(DayofMonth) 1~31的整数(但是你需要考虑你月的天数) , - * ? / L W C
* 月份(Month) 1~12的整数或者 JAN-DEC , - * /
* 星期(DayofWeek) 1~7的整数或者 SUN-SAT (注:1=SUN) , - * ? / L C #
* 年(可选,留空)(Year) 1970~2099 , - * /
* (注:星期的值可为:1~7 1=SUN 或 SUN,MON,TUE,WED,THU,FRI,SAT)
*
*
* 每一个域都使用数字,但还可以出现如下特殊字符,它们的含义是:
* (1)*:表示匹配该域的任意值。假如在Minutes域使用*, 即表示每分钟都会触发事件。
* (2)?:只能用在DayofMonth和DayofWeek两个域。它也匹配域的任意值,但实际不会。
* 因为DayofMonth和DayofWeek会相互影响。例如想在每月的20日触发调度,不管20日到底是星期几,
* 则只能使用如下写法: 13 13 15 20 * ?, 其中最后一位只能用?,而不能使用*,
* 如果使用*表示不管星期几都会触发,实际上并不是这样。
* (3)-:表示范围。例如在Minutes域使用5-20,表示从5分到20分钟每分钟触发一次
* (4)/:表示起始时间开始触发,然后每隔固定时间触发一次。例如在Minutes域使用5/20,则意味着5分钟触发一次,而25,45等分别触发一次.
* (5),:表示列出枚举值。例如:在Minutes域使用5,20,则意味着在5和20分每分钟触发一次。
* (6)L:表示最后,只能出现在DayofWeek和DayofMonth域。如果在DayofWeek域使用5L,意味着在最后的一个星期四触发。
* (7)W:表示有效工作日(周一到周五),只能出现在DayofMonth域,系统将在离指定日期的最近的有效工作日触发事件。
* 例如:在 DayofMonth使用5W,如果5日是星期六,则将在最近的工作日:星期五,即4日触发。如果5日是星期天,
* 则在6日(周一)触发;如果5日在星期一到星期五中的一天,则就在5日触发。另外一点,W的最近寻找不会跨过月份 。
* (8)LW:这两个字符可以连用,表示在某个月最后一个工作日,即最后一个星期五。
* (9)#:用于确定每个月第几个星期几,只能出现在DayofMonth域。例如在4#2,表示某月的第二个星期三。
*
*
* 三、常用表达式例子
* (1)0 0 2 1 * ? * 表示在每月的1日的凌晨2点调整任务
* (2)0 15 10 ? * MON-FRI 表示周一到周五每天上午10:15执行作业
* (3)0 15 10 ? * 6L 2002-2006 表示2002-2006年的每个月的最后一个星期五上午10:15执行作
* (4)0 0 10,14,16 * * ? 每天上午10点,下午2点,4点
* (5)0 0/30 9-17 * * ? 朝九晚五工作时间内每半小时
* (6)0 0 12 ? * WED 表示每个星期三中午12点
* (7)0 0 12 * * ? 每天中午12点触发
* (8)0 15 10 ? * * 每天上午10:15触发
* (9)0 15 10 * * ? 每天上午10:15触发
* (10)0 15 10 * * ? * 每天上午10:15触发
* (11)0 15 10 * * ? 2005 2005年的每天上午10:15触发
* (12)0 * 14 * * ? 在每天下午2点到下午2:59期间的每1分钟触发
* (13)0 0/5 14 * * ? 在每天下午2点到下午2:55期间的每5分钟触发
* (14)0 0/5 14,18 * * ? 在每天下午2点到2:55期间和下午6点到6:55期间的每5分钟触发
* (15)0 0-5 14 * * ? 在每天下午2点到下午2:05期间的每1分钟触发
* (16)0 10,44 14 ? 3 WED 每年三月的星期三的下午2:10和2:44触发
* (17)0 15 10 ? * MON-FRI 周一至周五的上午10:15触发
* (18)0 15 10 15 * ? 每月15日上午10:15触发
* (19)0 15 10 L * ? 每月最后一日的上午10:15触发
* (20)0 15 10 ? * 6L 每月的最后一个星期五上午10:15触发
* (21)0 15 10 ? * 6L 2002-2005 2002年至2005年的每月的最后一个星期五上午10:15触发
* (22)0 15 10 ? * 6#3 每月的第三个星期五上午10:15触发
*/
}
The comments on the writing of cron expressions are very detailed. After the project starts, you can see that the task is executed every 5 seconds. nothingService is as follows:
/**
* @author panmingshuai
* @description
* @Time 2018年3月13日 下午4:53:25
*
*/
public interface NothingService {
String getStr();
}
/**
* @author panmingshuai
* @description
* @Time 2018年3月13日 下午4:54:55
*
*/
@Service
public class NothingServiceImpl implements NothingService {
@Override
public String getStr() {
return "123456gdf";
}
}
complete