This blog is mainly about uploading local disk files to the project corresponding to the code cloud network through the TortoiseGit tool. For the Github open source community, use the TortoiseGit tool to upload local files to the corresponding project in Github. For specific steps, you can also refer to this blog.
1. "Clone" and download the corresponding project on the code cloud network, as shown in Figure 1, Figure 2 and Figure 3 below
Figure 1
Figure II
Figure 3
2. Put the files to be uploaded into the corresponding directory of the project downloaded from the code cloud network, as shown in Figure 4.
Figure 4
3. Perform the "Git Commit" operation on the files to be uploaded, as shown in Figure 5, Figure 6, and Figure 7.
Figure 5
Figure 6
Figure 7
4. Perform the "TortoiseGit ---> Pull" operation on the files to be uploaded, as shown in Figure 8, Figure 9, and Figure 10.
Figure 8
Figure 9
Figure 10
5. Perform the "TortoiseGit ---> Push" operation on the files to be uploaded, as shown in Figures 11, 12, 13, and 14.
Figure 11
Figure 12
Figure 13
Figure 14
6. You can see that the local file is successfully uploaded to the code cloud network, as shown in Figure 15.
Figure 15