https://blog.csdn.net/zzw5945/article/details/72784355
This series of index blog posts: Index documents of AD series tutorials
1. Open DXP, click the menu file, then click new, and see the framed place in the picture below. If there is no frame, we will not use it. Those are AD extensions.
2. First click project, add a project, and select the pcb project as the first step
2 in the figure is the project name, and 3 is the path where the project is saved. This is set according to your actual situation. Then click Finish to display the following interface.
3. Create a new schematic file and a pcb file in turn. In fact, the way to add pcb files here, you can also perform corresponding operations through the files button in the lower left corner, where you can set the size of the pcb, but I generally don't use it, and finally I cut out the appropriate size through the shape. For details, see the 8th blog PCB outline cutting.
Then create a corresponding library file for drawing the component package library.
Finally, use Ctrl+S to save.
So far, an empty project has been established. For knowledge of component packaging library, please refer to the fifth blog.