illustrate:
In this article:
The image used is windows server2016.
The server used is DELLEMC R740.
The original system is Centos.
Make a boot disk
1. Download the Rufus disk burning tool
The download address is as follows
Baidu network disk download address:
Link: https://pan.baidu.com/s/1K9o65F8hK05xxsDQZ0k0mw?pwd=nexs
Extraction code: nexs
2. Prepare Windows server image
The official website download address is as follows:
Windows Server 2022 | Microsoft Evaluation Center
3. Start making a boot disk
First insert the U disk into the computer
Then follow the steps in the figure below
The following will appear next, just click OK
Then this interface appears
just wait
The boot disk is created as follows
Start to install the system
1. Boot
Explain that the power button is in the upper right corner of the DELL server
2. Check whether the hard disk is inserted properly. If it is plugged in, there should be a green light on. (Must definitely check it out)
The boot interface will appear next, just wait here for a while.
The following interface appears.
3. Turn on the BIOS mode (if you do not perform the following Ctrl+R, there will be no response)
Press F11 to enter Boot Manager
Press ESC to save and return and restart automatically
4. Configure RAID
After restarting, press Ctrl+R to enter the virtual hard disk configuration interface
(Since there is only one hard disk, only one row is shown)
Move to No Configuration Present! That's OK. Press F2 to display the following.
Press Enter to enter Create New Up
Tap key to move left and right
Spacebar to select all
Finally choose OK
Return to the interface below
Navigate to ID: 0, 278.875GB, press F2
Press Esc to confirm exit
Restart as required
after reboot
Press F11 to enter Boot Manager
Select One-shot UEFI Boot Menu, enter the following interface
Select USB, press Enter, and wait for the following interface to appear
5. Officially install windows server
Next step (hint: Tap can move the cursor)
install now
The key interface below can be skipped (search online if necessary)
Note below to select the desktop experience version (otherwise you will not have a graphical interface)
This will restart your server countless times, don't try to change its configuration in the meantime.
The custom setting password needs to contain
Letter case + number + symbol
after finishing
The installation is complete
Restore the boot disk to a normal U disk
in Explorer. Right-click on the inserted startup disk in the left column.