Tip: After the article is written, the table of contents can be automatically generated. How to generate it can refer to the help document on the right
Article directory
- foreword
- 1. Materials/tools
- Second, install the VMware virtual machine
-
- 1. Download the VMware virtual machine
- 2. After the download is successful, double-click to open, click Next, as shown in the following figure:
- 3. Click the check mark of I accept the terms (A) in the license agreement, and click Next, as shown in the figure:
- 4. Select the installation location of VMware, select the disk location, and click Next, as shown in the figure below:
- 5. Remove the check mark and click Next, as shown in the figure below:
- 6. After clicking Next, the installation will pop up, just click it, as shown in the following figure:
- 7. About 10 minutes, you can install successfully, as shown in the following figure:
- 8. Enter the license and VMware can use it. As shown below:
- 3. Configure the VMware virtual machine
-
- 1. Open VMware and click to create a new virtual machine. As shown below:
- 2. Select Custom (Advanced), click Next, as shown in the figure:
- 3. Click Next directly, as shown in the figure below:
- 4. Browse the hard drive and select the installer CD image file. As shown below:
- 5. Easy installation information. Enter personalized Linux, user name, password, and click Next, as shown in the figure below:
- 6. Name the virtual machine. Click Next directly, as shown in the figure:
- 7. Processor configuration. Select 2 for the number of processors and 1 for the number of cores per processor. As shown below:
- 8. For the memory configuration of this virtual machine, click Next directly. As shown below:
- 9. Network type. Select Use Bridged Networking (R). As shown below:
- 10. Select the I/O controller type. Just click Next. As shown below:
- 11. Select the disk type. Just click Next. as the picture shows:
- 12. Select the disk and click Next directly. as the picture shows:
- 13. Specify the disk capacity. Select Store the virtual disk as a single file (O) and click Next. As shown below:
- 14. Specify the disk file. Click Next directly, as shown in the figure:
- 15. Click Finish, and the virtual machine will be created. As shown below:
- 4. Unbutu installation
-
- 1. After the virtual machine is set up, the following window will pop up. Select Chinese and click Continue. As shown below:
- 2. Click Continue directly. As shown below:
- 3. Click Install Now directly. As shown below:
- 4. The following window pops up, click Continue.
- 5. Select a location on the map and click Continue.
- 6. Enter the user name and password, and click Continue.
- 7. About 20 minutes, Unbutu can be installed. As shown below.
- 8. Click Restart Now to enter the Linux system. Click Skip in the upper right corner.
- 9. Select No, don't send system info. Click Next in the upper right corner.
- 10. Click Next in the upper right corner.
- 11. Click Done in the upper right corner.
- 12. You can enter the Linux desktop.
- Summarize
foreword
VMWare virtual machine software is a "virtual PC" software that allows you to run two or more Windows, DOS, and LINUX systems on one machine at the same time. Compared with the "multi-boot" system, VMWare adopts a completely different concept. A multi-boot system can only run one system at a time, and the machine needs to be restarted when the system is switched. Now let's install Unbutu.
1. Materials/tools
Window10
VMware virtual machine
download address
Unbutu
download address
Second, install the VMware virtual machine
1. Download the VMware virtual machine
Enter VMware official website: https://www.vmware.com/cn.html, click Download Now in the navigation bar below, and then click Workstation Pro marked in the picture, as shown in the picture below:
Download address:
https://www. vmware.com/products/workstation-pro/workstation-pro-evaluation.html
2. After the download is successful, double-click to open, click Next, as shown in the following figure:
3. Click the check mark of I accept the terms (A) in the license agreement, and click Next, as shown in the figure:
4. Select the installation location of VMware, select the disk location, and click Next, as shown in the figure below:
5. Remove the check mark and click Next, as shown in the figure below:
6. After clicking Next, the installation will pop up, just click it, as shown in the following figure:
7. About 10 minutes, you can install successfully, as shown in the following figure:
8. Enter the license and VMware can use it. As shown below:
3. Configure the VMware virtual machine
1. Open VMware and click to create a new virtual machine. As shown below:
2. Select Custom (Advanced), click Next, as shown in the figure:
3. Click Next directly, as shown in the figure below:
4. Browse the hard drive and select the installer CD image file. As shown below:
5. Easy installation information. Enter personalized Linux, user name, password, and click Next, as shown in the figure below:
6. Name the virtual machine. Click Next directly, as shown in the figure:
7. Processor configuration. Select 2 for the number of processors and 1 for the number of cores per processor. As shown below:
8. For the memory configuration of this virtual machine, click Next directly. As shown below:
9. Network type. Select Use Bridged Networking®. As shown below:
10. Select the I/O controller type. Just click Next. As shown below:
11. Select the disk type. Just click Next. as the picture shows:
12. Select the disk and click Next directly. as the picture shows:
13. Specify the disk capacity. Select Store the virtual disk as a single file (O) and click Next. As shown below:
14. Specify the disk file. Click Next directly, as shown in the figure:
15. Click Finish, and the virtual machine will be created. As shown below:
4. Unbutu installation
1. After the virtual machine is set up, the following window will pop up. Select Chinese and click Continue. As shown below:
2. Click Continue directly. As shown below:
3. Click Install Now directly. As shown below:
4. The following window pops up, click Continue.
5. Select a location on the map and click Continue.
6. Enter the user name and password, and click Continue.
7. About 20 minutes, Unbutu can be installed. As shown below.
8. Click Restart Now to enter the Linux system. Click Skip in the upper right corner.
9. Select No, don't send system info. Click Next in the upper right corner.
10. Click Next in the upper right corner.
11. Click Done in the upper right corner.
12. You can enter the Linux desktop.
## 13. Test network. Open the Firefox browser in the upper left corner and open the webpage. If you can access the Internet normally, Unbutu can be used.
Summarize
So far, the Unbutu system has been installed and set up, and it can be used normally.
The overall feeling of the Unbutu system is relatively smooth, the program is opened quickly, and the style is a bit like a mobile phone operating system. However, the problem is that the ease of use is poor, and it is very troublesome to install the software. It is more suitable for professional programmers, but not for the general public. Friends who are interested can experience it.