ICMAX wireless router WAN port should resolve how to set

In terms of broadband household, they are from the film ah intercepted strip cable into the computer or wireless router, wireless router connected to fiber optic cats method is how to do, what is the difference between cat-and routers, the following ICMAX gave you under the bar.

Fiber Cat proximity wireless router Method
1. First, a bar light cat any cable interface of the access to the wireless router WAN interface.
2. Subject always cat-default IP address is 192.168.1.1, so the wireless router's LAN interface IP needs of other segments of the Peugeot. Configuration: the first landing wireless router interface, the IP set to 192.168.2.1 Subnet Mask: 255.255.255.0 then save, then open the IE browser to log IP192.168.2.1 address input just assigned.

3. The next step is to set the WAN port. We open the network parameters selected by the wireless router's WAN port settings and then click on the WAN connection type, select a static IP address, and then changed to the following numbers: IP set 192.168.1.X this form (It should be set and cat-to the same network segment, but can not be set or 192.168.1.1 192.168.1.255).

subnet Mask: 255.255.255.0
gateway: set to the IP address 192.168.1.1 light cat
packet the MTU: for the 1500-DNS
server : cats set to light the IP address 192.168.1.1.
4. After the above three modifications, the wireless router can properly online. Finally, set up the wireless router parameters, SSID number is the name of the wireless router, select "WPA-PSK / WPA2-PSK " encryption set up their own wireless wifi password, click Save
5. After saving is complete, click to restart the router, which allows fiber cat then the wireless router connected, wired and wireless access to the Internet can be normal.
What is the difference with the router light cat
a different principle
1, light cat is a modem, which is the Ethernet optical signal is converted into equipment that we do accept dogs Internet signal, urgently computer can only dial by light cat.
2, the wireless router is a network can assign it to a network cable above a few computers, and the device has radio function.
Second, the different ports
1, wireless network router usually has four interfaces, and an antenna as its significant signs.
2, light cat usually only two ports connected to a telephone line, a network cable connection.
Third, different connector
1, connected to an end of cat-telephone line or a wireless router and computer.
2, the wireless router is connected to one end of the light cat, may have the other end connected to the computer through a cable or wireless wifi.
Fourth, set a different
one, the basic need to set the cat-
2, wireless router, you need to log 192.168.1.1 set, a bit complicated.

Summary: The above is connected to a wireless router on the fiber cat cat-difference method and router related presentations. We now installed broadband fiber transmission are basically oriented, its speed is very fast, now basically broadband fiber networks, however, need to have a fiber optical modem will transmit its signal conversion. Cat-scale integrated chip device, the optical signal into the process, DDR functions as storing data, ICMAX DDR can support higher operating frequency, bring about excellent data storage, read faster, conversion more quickly, and can withstand rigorous testing.
Now Wang-Wang Zhongxing Semiconductor ICMAX and reached a depth of cooperation in the field of optical cats, and work to bring better quality of light cat market.