description
Recently many of my friends have started the camera webcast, you need to video ordinary security cameras to the public network streaming media server, the public network streaming media server and then provides streaming format conversion, conversion to RTMP, HTTP-FLV, HLS, etc. can direct broadcast format Web, micro-letters. Currently the most common variety of cameras is through access protocol GB28181. The protocol is the camera, the NVR, or other video platforms and other equipment terminal active register to higher and keep-alive, and therefore the device side may not require device in a network environment fixed public network IP, LAN devices, 4G networks are available through GB28181 initiative registered on the public network server. LiveGBS paper with the public network streaming service, which is free to the privatization of streaming media software deployment, support for Windows and Linux systems. LiveGBS end of the device can take the video to the video recording history through GB28181 protocol, a series of operations gripping snapshot, PTZ control, warning messages and the like.
LiveGBS deployment
LiveGBS deployment can refer https://blog.csdn.net/jinlong0603/article/details/87906950 description.
common problem
- After LiveCMS and LiveSMS deploy up your browser and enter ip: 10000 port open LiveCMS page. This is generally LiveCMS 10000 port is occupied by another program that led to. You can uninstall LiveCMS, livecms.ini open the file, change the http port 10000 100002 or from other ports, and then reinstall LiveCMS.
- When you modify the service IP, you have to modify LiveCMS and LiveSMS configuration pages inside IP, can not only modify LiveCMS, otherwise the problem but can not be played online equipment may occur.
- When the probability of the emergence timeout or video, Caton and other issues when playing video, the device is generally due to the server-side video transmission network can not keep up cause, you can configure the device side of the page, to reduce the bit rate of the video. The general public to play if the proposed rate is set between 256-1024kbps. If the code rate is too high, the device is likely to keep up with an end upstream bandwidth.
- If LiveCMS, LiveSMS normal deployment, IP settings are correct. But when playing video always prompt "media server not found", the problem may be the configuration of the public network IP, but LiveCMS the machine can not access their LiveSMS directly through the public network IP. This situation is relatively small, if they are, then you need to uninstall LiveSMS service, and then modify livesms.ini file, the host at the [sip] Replace paragraph 127.0.0.1, before wan_ip set to public network ip, then use_wan_ip_recv_stream = 1, and then reinstall LiveSMS.
For more information
Live Streaming Internet Security -QQ exchange group: 615 081 503
GB GB28181 no plug-ins LiveGBS-QQ exchange group: 947 137 753
WEB：www.liveqing.com
Tel: 189-5515-0114 (the same micro-channel)
Copyright © LiveQing.com 2016-2019