Experimental environment Introduction:
52LAB experimental operating environment and requirements of independent experiments designed to facilitate the learning and systematic experimental operation CCNP learners and improve learning efficiency and reduce the cost of learning.
Experimental requirements:
1, according to the configuration information on the topology diagram shows the host name and IP address to each router;
2, full Router is configured to use a static routing protocol;
3,52LAB-1 configuration to the next hop network 35.1.1.0/24 addresses 52LAB-3 E0 / 1 interface IP address, the next hop to use other networks 52LAB-2 E0 / 0 interface IP address can;
4, test a: if 52LAB-1 destined for any other network can ping;
test b: 52LAB-1 deleted Flights 23.1.1.0/24 routing entries, to see if there is destined 35.1.1.0/24 route entry (record test results) 52LAB-1 routing table;
. 5, in. 4-52LAB configuration loopback0: 172.16.1.1/16,52LAB-5 configuration Loopback0: 172.16.1.2/24;
6,52LAB-172.16.0.0/16. 3 and are disposed to the static route 172.16.1.0/24;
7, test c: 52LAB-3 ping 172.16.1.1 and 172.16.1.2 respectively (record the test results);
8, according to the principle of correlation analysis of the results of the test ac (For details, refer to "theory").
Environmental download: Download page learning
lab environment to deploy or have any questions can consult the additive group: 563,732,595
