Buy VPS
VPS (Virtual Private Server, Virtual Private Server);
××× is the United States of a VPS provider, I recommend the registration link: https://www.vultr.com/?ref=7780837 (registered by this link you can get $ 50 coupon, of course, will give me $ 25 coupons);
After completing the registration, you will receive a verification message, you need to verify (here must be verified, not verified will not be able to purchase VPS oh);
Verified before recharge, the first charge of the knife 10, using Alipay, see below
Recharge when you see that knife 50 voucher, and the balance of 60 top-10 knife knife, and then you can choose to buy a VPS;
I purchased a Silicon Valley VPS, chose the knife monthly CentOS 3.5 system configuration, try to choose the West Coast region of the United States, after all, a short distance away from us, according to legend good signal! Haha ~ (Note, do not buy a monthly 2.5 knife, that only supports IPv6, and this purchase is not directly deductions, you will use to generate traffic fee)
Shadowsocks connection VPS & installation service
after the purchase is completed you can see the IP and login password information VPS, and then download a free gadget putty.exe used to connect to your VPS;
Use Putty tool may experience connection failures when connecting VPS, if a connection failure occurs, it will delete the VPS service (destroy Server Destroy) a re-buy until the next chart representation occurs can be used (or above sentence purchase / destroy not deductions, it may be due to an extremely small number of VPS initialization flow);
Here you have to connect your VPS, will see the login command window, and then completed according to your VPS information log on it (the command window, stand-alone right to paste the clipboard, right-click and then copy the password after press enter, only need to right click once, nothing is displayed here, in fact, is already entered);
After a successful login, wait until "[root @ host ~] #", copy the following script commands in Article 1, hit Enter:
wget --no-check-certificate https://freed.ga/github/shadowsocksR.sh; bash shadowsocksR.sh
若提示：wget :command not found请执行：yum install wget -y 后再重新执行第1条指令
然后安装shadowsocks服务过程基本都有中文提示，根据提示设置端口和密码就可以了，端口可以使用默认8989端口；
安装完成之后会出现 " 祝贺！ ***R 已经配置成功! "等信息，包括IP，端口，连接密码，加密方式等，这个信息请妥善保存！
安装锐速加速
其实到上一步，你已经完成SS服务器的搭建了，可以使用shadowsocks.exe配置使用了，但是感觉不加个速对不起这一番折腾；
安装锐速前需要为VPS更换内核，同样，使用Putty连接VPS后在命令窗口执行以下脚本：
wget -N --no-check-certificate https://freed.ga/kernel/ruisu.sh && bash ruisu.sh
-- 脚本安装需要1-3分钟，耐心等待服务器重启，服务器重启之后，重新连接继续安装锐速就行了。
以上脚本执行完成之后VPS服务器会自动重启，等上个几分钟，然后重新使用putty连接，执行锐速安装脚本：Check--N --no-wget Certificate https://github.com/91yun/serverspeeder/raw/master/serverspeeder.sh && the bash serverspeeder.sh
if unsuccessful can use a backup scriptwget -N --no-check-certificate https://raw.githubusercontent.com/91yun/serverspeeder/master/serverspeeder-all.sh && bash serverspeeder-all.sh
Appears next figure shows the installation was successful.
Use
then use ***. Exe appropriate information on the configuration and you're done! Simply fill in the server address, port, password, encryption, notes to others by default, configured and enabled you will be able to experience "an affair to" the ~