Experimental topology
Experimental tool
GNS3
Experimental Procedure
1. Construction apparatus according to the corresponding virtual good topology
2. Enter R1, an interface IP, configuration default route
3. Enter R2, configure the interface IP, configure a static route
4. Turn on the OSPF protocol, provided router ID, direct injection and a static route network segments
5. Go to R3, an interface IP, configuration default route
6. Open the OSPF protocol provided router ID, the default route injection
7. Enter R4, the IP interfaces configuration, the RIP and OSPF open and inject RIP OSPF, RIP, OSPF is injected
8. Enter R5, configure the interface IP, turn the RIP
9. Go to R6, an interface IP, configure static routes
10 are provided to the IP PC1-4
11. Verify the entire network interoperability
