Many companies are now carried out and the management server through the network monitoring software to monitor the status of the server, mostly via SNMP protocol (SNMP) monitoring the time, then we need to turn this on the server side service, and a simple setup.
The following are open and arrangement of windows2008 SNMP service
First, start the service:
After entering the system, go to Control Panel, click on <Programs and Features>.
Click on the left <to open or close the windows function>
In <Server Manager> page, click on the left <feature> Options
Click on the right <add functionality>
In the pop-up <Add Features Wizard> find <SNMP service> and checked, click <Next>
Click <Install>, windows will install the service
Wait a moment, after the installation is complete, click <Close> button; The SNMP service installation has been completed.
Want to use SNMP Service SNMP service you will need to do some configuration.
Two, SNMP service configuration
In <Server Manager> Click on the left side of the <configuration> and click <service>, then it will show all windows in the middle of the list of services to find something <SNMP Service>;
After installation will start automatically by default, If you do not leave this service is <started> status and startup type to <Auto>
Right-click the service, the pop-up menu, select <property>
In the pop-up <SNMP Service properties> dialog box, select the <Security> tab <add> in <accepted community name> area click the button to add a community name
In the pop-up <SNMP Service Configuration> dialog box, select the group permission to <read-only>
Note:
Read-only access: Monitoring software can only read operation on device information (usually just open the read-only access to)
read and write permissions: monitoring software can not only read, you can also change the relevant information and configuration devices
Set community name is <public> (this can be any name, be noted that monitoring client community name when monitoring the equipment used must match the community name on the device, or can not communicate)
Cancel <Send authentication trap> Options; When you select <Accept SNMP packets from any host> Click <OK>
NOTE:
<accept SNMP packets from any host>: groups all devices within the network matching device can be monitored using the SNMP protocol;
<accept SNMP packets from these host>: Only the device in the list by You can add the host name or IP address of the monitoring device after the device group that matches the device can be monitored via SNMP protocol, devices other than the list are not monitored, click <add> to the list.
The SNMP Service Configuration success! Monitoring can be carried out at the end of a certain degree of monitoring of the device via SNMP protocol.