Linear and nonlinear difference detection chamber

　　Chamber of the discrete system is detected in the whole process means, in the working condition of equipment in a certain period of time set in advance the error of the inside, and the raised temperature drop speed than the speed of the thermal transition. National requirements discrete system for detecting a mean value of raised temperature or decreasing calorific value, such as: it requires the time to three minutes, but the equipment can be done sometimes raised temperature value required in three minutes or heat reduction value and sometimes can not do the situation, this situation also shows that it is time to operate in all the work in a different length of time, often due to the detection of the test is not the same as change. Linear systems and discrete manufacturing technical ling first chamber of industry trends fashion.

　　Chamber of linear discrete systems detect not only the time required qualified values ​​are different, and they have to natural environmental regulations are not the same. Linear systems and discrete manufacturing technical ling first chamber of industry trends fashion.

　　Linear and nonlinear difference detection chamber.

　　Chamber of linear and discrete systems in the conduct of bridge inspection, with a big gap, the following is a detailed description of the equipment and the discrete linear detection system:

　　Refers to a linear detection equipment in the work chamber in the entire process, at a certain period of time set in advance inside, and the error rate of temperature drop mention hot speed ratio does not change the situation. National norms is the mean of three minutes each, such as: at a certain time period, if the equipment can be done in three minutes put the required temperature value or lower heating value, then it's your job to operate in all the time the time is in the range of three minutes, and will be fixed and do not change. Simple point, that is the same as the original rate of temperature temperatures time. Linear systems and discrete manufacturing technical ling first chamber of industry trends fashion.