Драйвер чипа серии Ralink RT2070 RT3070 RT2870 перенесен на демонстрационную плату LPC3250, решение проблемы ifconfig ra0 up ~~

Платформа:

Модуль Wi-Fi: Ralink RT2070 (чип фактически тот же, что и у 3070, но удалена функция 802.11n)

Ядро Linux: Linux 2.6.27

Пользовательский интерфейс: Android 1,5

МК: NXP LPC3250

 

вопрос:

Скачиваем с официального сайта последнюю версию драйвера Ralink3070.После компиляции загрузка rt3070sta.k идет нормально, но появляется при включении ifconfig ra0.

 / # ifconfig ra0 up ifconfig: page allocation failure. order:6, mode:0x0 [<c002e12c>] (dump_stack+0x0/0x14) from [<c006f5f4>] (__alloc_pages_internal+0x3e8/0x400) [<c006f20c>] (__alloc_pages_internal+0x0/0x400) from [<c002f988>] (__dma_alloc+0x160/0x3b0) [<c002f828>] (__dma_alloc+0x0/0x3b0) from [<c002fc60>] (dma_alloc_coherent+0x58/0x64) [<c002fc08>] (dma_alloc_coherent+0x0/0x64) from [<c02002d0>] (hcd_buffer_alloc+0x9c/0xa4) r7:00000000 r6:c4861000 r5:c033559c r4:00000020 [<c0200234>] (hcd_buffer_alloc+0x0/0xa4) from [<c01f45f4>] (usb_buffer_alloc+0x24/0x30) r5:c48610d8 r4:00000003 [<c01f45d0>] (usb_buffer_alloc+0x0/0x30) from [<bf0496bc>] (NICInitTransmit+0xf0/0x7a4 [rt3070sta]) [<bf0495cc>] (NICInitTransmit+0x0/0x7a4 [rt3070sta]) from [<bf049f10>] (RTMPAllocTxRxRingMemory+0x40/0xac [rt3070sta]) [<bf049ed0>] (RTMPAllocTxRxRingMemory+0x0/0xac [rt3070sta]) from [<bf03b8bc>] (rt28xx_init+0xc0/0x3dc [rt3070sta]) r5:c4861000 r4:00000000 [<bf03b7fc>] (rt28xx_init+0x0/0x3dc [rt3070sta]) from [<bf048504>] (rt28xx_open+0x50/0xcc [rt3070sta]) [<bf0484b4>] (rt28xx_open+0x0/0xcc [rt3070sta]) from [<bf0487b4>] (MainVirtualIF_open+0x30/0x130 [rt3070sta]) r5:c3c84800 r4:c4861000 [<bf048784>] (MainVirtualIF_open+0x0/0x130 [rt3070sta]) from [<c0242f00>] (dev_open+0xa0/0x104) r5:c3c8482c r4:c3c84800 [<c0242e60>] (dev_open+0x0/0x104) from [<c0241f94>] (dev_change_flags+0x98/0x170) r5:00000001 r4:c3c84800 [<c0241efc>] (dev_change_flags+0x0/0x170) from [<c0286720>] (devinet_ioctl+0x374/0x790) r7:c3949ec0 r6:00000001 r5:00000000 r4:00008914 [<c02863ac>] (devinet_ioctl+0x0/0x790) from [<c028709c>] (inet_ioctl+0xcc/0xfc) [<c0286fd0>] (inet_ioctl+0x0/0xfc) from [<c0234fe8>] (sock_ioctl+0x1e8/0x240) [<c0234e00>] (sock_ioctl+0x0/0x240) from [<c009872c>] (vfs_ioctl+0x34/0x78) r6:00008914 r5:00008914 r4:be8abb2c [<c00986f8>] (vfs_ioctl+0x0/0x78) from [<c00989dc>] (do_vfs_ioctl+0x26c/0x28c) r5:be8abb2c r4:c1c386e0 [<c0098770>] (do_vfs_ioctl+0x0/0x28c) from [<c0098a3c>] (sys_ioctl+0x40/0x64) r7:c1c386e0 r6:00008914 r5:be8abb2c r4:00000003 [<c00989fc>] (sys_ioctl+0x0/0x64) from [<c0029c40>] (ret_fast_syscall+0x0/0x2c) r7:00000036 r6:00000003 r5:00019388 r4:be8abb2c Mem-info: DMA per-cpu: CPU 0: hi: 18, btch: 3 usd: 16 Active:11398 inactive:1429 dirty:0 writeback:0 unstable:0 free:377 slab:543 mapped:5270 pagetables:526 bounce:0 DMA free:1508kB min:1016kB low:1268kB high:1524kB active:45592kB inactive:5716kB present:65024kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 DMA: 291*4kB 7*8kB 4*16kB 1*32kB 1*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048k B 0*4096kB = 1508kB 7089 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 16384 pages of RAM 559 free pages 1486 reserved pages 543 slab pages 25361 pages shared 0 pages swap cached <-- ERROR in Alloc TX TxContext[3] HTTX_BUFFER !! <-- RTMPAllocTxRxRingMemory, Status=3 ERROR!!! RTMPAllocDMAMemory failed, Status[=0x00000003] !!! rt28xx Initialized fail !!! error: SIOCSIFFLAGS (Operation not permitted)

ошибка.

причина:

В драйвере 3070 HTTX_BUFFER.field.WirelessPacket[MAX_TXBULK_SIZE] и MAX_TXBULK_SIZE слишком велики.

[включить/чип/mac_usb.h:169]

typedef struct __HTTX_BUFFER{ union{ UCHAR WirelessPacket[MAX_TXBULK_SIZE]; HEADER_802_11 NullFrame; PSPOLL_FRAME PsPollPacket; RTS_FRAME RTSFrame; }field; UCHAR Aggregation[4]; //Buffer for save Aggregation size. } HTTX_BUFFER, *PHTTX_BUFFER;

 

MAX_TXBULK_SIZE определяется в include/iface/rtmp_usb.h.

#define MAX_TXBULK_SIZE (LOCAL_TXBUF_SIZE*BULKAGGRE_SIZE)

 

LOCAL_TXBUF_SIZE=2048, просто измените BULKAGGRE_SIZE со 100 по умолчанию на 60.

BULKAGGRE_SIZE определяется в include/os/rt_linux.h.

 

Подобные сообщения об ошибках, другие причины:

1、http://blog.chinaunix.net/u3/109825/showart_2143279.html

2、http://ubuntuforums.org/showthread.php?p=5888081