Oracle异机恢复处理

Oracle异机恢复处理

 

在平时工作中，我们可能会或多或少遇到数据迁移问题，比如：数据库之前在windows机器上，然后我们由于更换新服务器，想把数据迁移到新服务器上，新服务器安装的是linux系统。由于系统不同，目录结构肯定也不一样，所以在备份恢复数据时，我们就遇到很多问题。下面分享下我处理这种问题的恢复方法。

 

环境：SUSE linux10（由于资源有限，源库和目标库都在此服务器上，但不影响操作方法，源库和目标库的文件位置不同，这个是重点，因为异构系统的文件存放路径肯定不一致，比如上面提到windows系统的库恢复到linux系统上）。

源库：db_name：ceshidb，instance_name： ceshidb

目标库：db_name： ceshidb,instance_name： oric

测试版本：10.2.0.5

几点说明：

（1） RMAN 恢复的时候，db_name必须相同。如果说要想改成其他的数据库名，可以在恢复成功后，用nid 命令修改。数据库名的信息会记录到控制文件里，所以如果在恢复的时候，如果db_name不一致，恢复的时候会报错。

（2） 如果恢复的路径和源库不一致，就需要在restore时用set 命令指定新位置。 并且使用switch datafile all将信息更新的到控制文件。

 

开始实战操作

一：备份源库数据

先做全库备份（可以把归档备份和控制文件备份写到一个run里面，我是分开备份的，目的在于说明下备份顺序，全库备份-归档日志备份-控制文件备份，建议大家采用这样的顺序来备份数据，因为一般都没有配置catalog库，所以备份的信息存储在控制文件中，当还原数据时，首先还原控制文件，控制文件记录了你的备份信息，如果先备份控制文件，那么在备份的控制文件之后做的备份信息，就没有记录在此备份的控制文件中，请大家注意哈）

 

全库备份

oracle@nwsj:/u01/oracle/oradata> rman target /

 

Recovery Manager: Release 10.2.0.5.0 - Production on Thu Jan 21 18:49:522016

 

Copyright (c) 1982, 2007, Oracle. All rights reserved.

 

connected to target database: CESHIDB (DBID=2027504492)

 

RMAN> run {

allocate channel d1 type disk;

allocate channel d2 type disk;

backup database format '/u01/backup_full_%U';

release channel d1;

release channel d2;

}

allocate channel d1 type disk;

allocate channel d2 type disk;

Starting backup at 21-JAN-16

allocated channel: ORA_DISK_1

channel ORA_DISK_1: sid=142 devtype=DISK

channel ORA_DISK_1: starting full datafile backupset

channel ORA_DISK_1: specifying datafile(s) in backupset

input datafile fno=00009 name=/u01/oracle/oradata/ceshiku/cs_dir03.dbf

input datafile fno=00004 name=/u01/oracle/oradata/ceshiku/users01.dbf

input datafile fno=00002 name=/u01/oracle/oradata/ceshiku/undotbs01.dbf

input datafile fno=00001 name=/u01/oracle/oradata/ceshiku/system01.dbf

input datafile fno=00003 name=/u01/oracle/oradata/ceshiku/sysaux01.dbf

input datafile fno=00006 name=/u01/oracle/oradata/ceshiku/CS_DIR02.dbf

input datafile fno=00007 name=/u01/oracle/oradata/ceshiku/aa01.dbf

input datafile fno=00005 name=/u01/oracle/oradata/ceshiku/cs_dir01.dbf

input datafile fno=00010 name=/u01/oracle/oradata/ceshiku/b02.dbf

input datafile fno=00008 name=/u01/oracle/oradata/ceshiku/b01.dbf

channel ORA_DISK_1: starting piece 1 at 21-JAN-16

channel ORA_DISK_1: finished piece 1 at 21-JAN-16

piece handle=/u01/backup_full_01qrurnv_1_1 tag=TAG20160121T185039comment=NONE

channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15

channel ORA_DISK_1: starting full datafile backupset

channel ORA_DISK_1: specifying datafile(s) in backupset

including current control file in backupset

including current SPFILE in backupset

channel ORA_DISK_1: starting piece 1 at 21-JAN-16

channel ORA_DISK_1: finished piece 1 at 21-JAN-16

piece handle=/u01/backup_full_02qruroe_1_1 tag=TAG20160121T185039comment=NONE

channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01

released channel: d1

 

released channel: d2

Finished backup at 21-JAN-16

   

切换下日志

RMAN> sql 'alter system switch logfile';

 

sql statement: alter system switch logfile

 

RMAN> sql 'alter system switch logfile';

 

sql statement: alter system switch logfile

 

归档日志备份

RMAN> backup archivelog all format '/u01/backup_arch_%U';

 

Starting backup at 21-JAN-16

current log archived

using channel ORA_DISK_1

channel ORA_DISK_1: starting archive log backupset

channel ORA_DISK_1: specifying archive log(s) in backup set

input archive log thread=1 sequence=1 recid=1 stamp=901738168

input archive log thread=1 sequence=2 recid=2 stamp=901738171

input archive log thread=1 sequence=3 recid=3 stamp=901738174

input archive log thread=1 sequence=4 recid=4 stamp=901738276

input archive log thread=1 sequence=5 recid=5 stamp=901738282

input archive log thread=1 sequence=6 recid=6 stamp=901738288

input archive log thread=1 sequence=7 recid=7 stamp=901738309

channel ORA_DISK_1: starting piece 1 at 21-JAN-16

channel ORA_DISK_1: finished piece 1 at 21-JAN-16

piece handle=/u01/backup_arch_03qrurq5_1_1 tag=TAG20160121T185149comment=NONE

channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02

Finished backup at 21-JAN-16

 

控制文件备份

RMAN> backup current controlfile format'/u01/backup_con_%U';

 

Starting backup at 21-JAN-16

using channel ORA_DISK_1

channel ORA_DISK_1: starting full datafilebackupset

channel ORA_DISK_1: specifying datafile(s)in backupset

including current control file in backupset

channel ORA_DISK_1: starting piece 1 at21-JAN-16

channel ORA_DISK_1: finished piece 1 at21-JAN-16

piece handle=/u01/backup_con_04qrurr1_1_1tag=TAG20160121T185217 comment=NONE

channel ORA_DISK_1: backup set complete,elapsed time: 00:00:01

Finished backup at 21-JAN-16

然后关闭源库ceshidb（因为我是在同一台服务器上做的，所以需要修改下源库的db_name，否则在目标库恢复了控制文件后，不能mount的，会提示：cannot mount database inEXCLUSIVE mode，因为在$ORACLE_HOME/dbs下面的lkceshidb文件存在，进程在运行中，所以会有这个提示。如果是不同的服务器，则不需要此操作，顺便练习下nid方式来修改数据库名）

oracle@nwsj:/u01/oracle> nid target=/dbname=ceshiku

 

DBNEWID: Release 10.2.0.5.0 - Production onThu Jan 21 18:53:52 2016

 

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

 

Connected to database CESHIDB(DBID=2027504492)

 

Connected to server version 10.2.0

 

Control Files in database:

   /u01/oracle/oradata/ceshiku/control01.ctl

   /u01/oracle/oradata/ceshiku/control02.ctl

   /u01/oracle/oradata/ceshiku/control03.ctl

 

Change database ID and database nameCESHIDB to CESHIKU? (Y/[N]) => y

 

Proceeding with operation

Changing database ID from 2027504492 to429152512

Changing database name from CESHIDB toCESHIKU

   Control File /u01/oracle/oradata/ceshiku/control01.ctl - modified

   Control File /u01/oracle/oradata/ceshiku/control02.ctl - modified

    Control File/u01/oracle/oradata/ceshiku/control03.ctl - modified

   Datafile /u01/oracle/oradata/ceshiku/system01.dbf - dbid changed, wrotenew name

   Datafile /u01/oracle/oradata/ceshiku/undotbs01.dbf - dbid changed, wrotenew name

   Datafile /u01/oracle/oradata/ceshiku/sysaux01.dbf - dbid changed, wrotenew name

   Datafile /u01/oracle/oradata/ceshiku/users01.dbf - dbid changed, wrotenew name

   Datafile /u01/oracle/oradata/ceshiku/cs_dir01.dbf - dbid changed, wrotenew name

   Datafile /u01/oracle/oradata/ceshiku/CS_DIR02.dbf - dbid changed, wrotenew name

   Datafile /u01/oracle/oradata/ceshiku/aa01.dbf - dbid changed, wrote newname

   Datafile /u01/oracle/oradata/ceshiku/b01.dbf - dbid changed, wrote newname

   Datafile /u01/oracle/oradata/ceshiku/cs_dir03.dbf  - dbid changed, wrote new name

   Datafile /u01/oracle/oradata/ceshiku/b02.dbf - dbid changed, wrote newname

   Control File /u01/oracle/oradata/ceshiku/control01.ctl - dbid changed,wrote new name

   Control File /u01/oracle/oradata/ceshiku/control02.ctl - dbid changed,wrote new name

   Control File /u01/oracle/oradata/ceshiku/control03.ctl - dbid changed,wrote new name

   Instance shut down

 

Database name changed to CESHIKU.

Modify parameter file and generate a newpassword file before restarting.

Database ID for database CESHIKU changed to429152512.

All previous backups and archived redo logsfor this database are unusable.

Database is not aware of previous backupsand archived logs in Recovery Area.

Database has been shutdown, open databasewith RESETLOGS option.

Succesfully changed database name and ID.

DBNEWID - Completed succesfully.

oracle@nwsj:/u01/oracle> sqlplus / assysdba

 

SQL*Plus: Release 10.2.0.5.0 - Productionon Thu Jan 21 18:54:03 2016

 

Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.

 

Connected to an idle instance.

SQL> alter system set db_name='ceshiku'scope=spfile;

 

System altered.

SQL> shutdown immediate;

ORA-01109: database not open

 

Database dismounted.

ORACLE instance shut down.

SQL> startup;

ORACLE instance started.

 

Total System Global Area 2147483648 bytes

Fixed Size                  2097624 bytes

Variable Size             939527720 bytes

Database Buffers         1174405120 bytes

Redo Buffers               31453184 bytes

Database mounted.

ORA-01589: must use RESETLOGS orNORESETLOGS option for database open

 

 

SQL> alter database open resetlogs;

 

Database altered.

Ok，至此，源库修改db_name完成。

二：在目标库恢复

创建目标库需要的目录，此处省略…………

创建目标库的口令文件

oracle@nwsj:/u01/oracle> orapwd file=?/dbs/orapwdoric password=oracle

创建初始化参数文件

将源库的pfile文件拷贝过来，修改里面的实例名和路径，然后 启动oric实例到nomount状态

oracle@nwsj:/u01/oracle>export ORACLE_SID=oric

SQL> create spflie from pfile=’/home/oracle/initoric.pfile’;

 

spfile created.

SQL> STARTUP NOMOUNT;

ORACLE instance started.

Total System Global Area 1073741824 bytes

Fixed Size                  2101608 bytes

Variable Size             260050584 bytes

Database Buffers          788529152 bytes

Redo Buffers               23060480 bytes

RMAN恢复控制文件并启动数据库到mount

oracle@nwsj:/u01/oracle/product/10.2.0/db_1/dbs>$ORACLE_HOME/bin/rman target /

 

Recovery Manager: Release 10.2.0.5.0 -Production on Thu Jan 21 19:33:34 2016

 

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

 

connected to target database: ceshidb (notmounted)

RMAN> restore controlfile from'/u01/backup_con_04qrurr1_1_1';

 

Starting restore at 21-JAN-16

using target database control file insteadof recovery catalog

allocated channel: ORA_DISK_1

channel ORA_DISK_1: sid=152 devtype=DISK

 

channel ORA_DISK_1: restoring control file

channel ORA_DISK_1: restore complete,elapsed time: 00:00:01

outputfilename=/u01/oracle/oradata/oric/control01.ctl

outputfilename=/u01/oracle/oradata/oric/control02.ctl

outputfilename=/u01/oracle/oradata/oric/control03.ctl

Finished restore at 21-JAN-16

 

RMAN> alter database mount;

 

database mounted

released channel: ORA_DISK_1

RMAN恢复数据文件

RMAN> run

2> {

3> allocate channel d1 type disk;

4> allocate channel d2 type disk;

5> set newname for datafile'/u01/oracle/oradata/ceshiku/system01.dbf' to '/u01/oracle/oradata/oric/system01.dbf';

6> set newname for datafile'/u01/oracle/oradata/ceshiku/undotbs01.dbf' to'/u01/oracle/oradata/oric/undotbs01.dbf';

7> set newname for datafile'/u01/oracle/oradata/ceshiku/sysaux01.dbf' to '/u01/oracle/oradata/oric/sysaux01.dbf';

8> set newname for datafile'/u01/oracle/oradata/ceshiku/users01.dbf' to'/u01/oracle/oradata/oric/users01.dbf';

9> set newname for datafile'/u01/oracle/oradata/ceshiku/cs_dir01.dbf' to'/u01/oracle/oradata/oric/cs_dir01.dbf';

10> set newname for datafile'/u01/oracle/oradata/ceshiku/CS_DIR02.dbf' to'/u01/oracle/oradata/oric/CS_DIR02.dbf';

11> set newname for datafile'/u01/oracle/oradata/ceshiku/aa01.dbf' to '/u01/oracle/oradata/oric/aa01.dbf';

12> set newname for datafile '/u01/oracle/oradata/ceshiku/b01.dbf'to '/u01/oracle/oradata/oric/b01.dbf';

13> set newname for datafile'/u01/oracle/oradata/ceshiku/cs_dir03.dbf ' to'/u01/oracle/oradata/oric/cs_dir03.dbf ';

14> set newname for datafile'/u01/oracle/oradata/ceshiku/b02.dbf' to '/u01/oracle/oradata/oric/b02.dbf';

15> restore database;

16> switch datafile all;

17> release channel d1;

18> release channel d2;

19> }

 

allocated channel: d1

channel d1: sid=152 devtype=DISK

 

allocated channel: d2

channel d2: sid=151 devtype=DISK

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

executing command: SET NEWNAME

 

Starting restore at 21-JAN-16

Starting implicit crosscheck backup at21-JAN-16

Crosschecked 3 objects

Finished implicit crosscheck backup at21-JAN-16

 

Starting implicit crosscheck copy at 21-JAN-16

Finished implicit crosscheck copy at21-JAN-16

 

searching for all files in the recoveryarea

cataloging files...

no files cataloged

 

 

channel d1: starting datafile backupsetrestore

channel d1: specifying datafile(s) torestore from backup set

restoring datafile 00001 to/u01/oracle/oradata/oric/system01.dbf

restoring datafile 00002 to/u01/oracle/oradata/oric/undotbs01.dbf

restoring datafile 00003 to/u01/oracle/oradata/oric/sysaux01.dbf

restoring datafile 00004 to/u01/oracle/oradata/oric/users01.dbf

restoring datafile 00005 to/u01/oracle/oradata/oric/cs_dir01.dbf

restoring datafile 00006 to/u01/oracle/oradata/oric/CS_DIR02.dbf

restoring datafile 00007 to/u01/oracle/oradata/oric/aa01.dbf

restoring datafile 00008 to/u01/oracle/oradata/oric/b01.dbf

restoring datafile 00009 to/u01/oracle/oradata/oric/cs_dir03.dbf

restoring datafile 00010 to/u01/oracle/oradata/oric/b02.dbf

channel d1: reading from backup piece/u01/backup_full_01qrurnv_1_1

channel d1: restored backup piece 1

piece handle=/u01/backup_full_01qrurnv_1_1tag=TAG20160121T185039

channel d1: restore complete, elapsed time:00:01:05

Finished restore at 21-JAN-16

 

datafile 1 switched to datafile copy

input datafile copy recid=11 stamp=901740940filename=/u01/oracle/oradata/oric/system01.dbf

datafile 2 switched to datafile copy

input datafile copy recid=12stamp=901740940 filename=/u01/oracle/oradata/oric/undotbs01.dbf

datafile 3 switched to datafile copy

input datafile copy recid=13 stamp=901740940filename=/u01/oracle/oradata/oric/sysaux01.dbf

datafile 4 switched to datafile copy

input datafile copy recid=14stamp=901740940 filename=/u01/oracle/oradata/oric/users01.dbf

datafile 5 switched to datafile copy

input datafile copy recid=15stamp=901740940 filename=/u01/oracle/oradata/oric/cs_dir01.dbf

datafile 6 switched to datafile copy

input datafile copy recid=16stamp=901740940 filename=/u01/oracle/oradata/oric/CS_DIR02.dbf

datafile 7 switched to datafile copy

input datafile copy recid=17stamp=901740940 filename=/u01/oracle/oradata/oric/aa01.dbf

datafile 8 switched to datafile copy

input datafile copy recid=18stamp=901740940 filename=/u01/oracle/oradata/oric/b01.dbf

datafile 9 switched to datafile copy

input datafile copy recid=19stamp=901740940 filename=/u01/oracle/oradata/oric/cs_dir03.dbf

datafile 10 switched to datafile copy

input datafile copy recid=20stamp=901740940 filename=/u01/oracle/oradata/oric/b02.dbf

 

released channel: d1

 

released channel: d2

（注意，因为我们的路径不同，所以我们需要使用set 命令转换一下路径。

还需要switch datafile all，是用来更新控制文件里的信息。因为数据文件的路径信息等存在控制文件中）

 

RECOVER DB

RMAN> recover database;

 

Starting recover at 21-JAN-16

using target database control file instead of recovery catalog

allocated channel: ORA_DISK_1

channel ORA_DISK_1: sid=153 devtype=DISK

 

starting media recovery

 

archive log thread 1 sequence 4 is already on disk as file/u01/backup/ceshiku/archivelog/1_4_901735878.dbf

archive log thread 1 sequence 5 is already on disk as file/u01/backup/ceshiku/archivelog/1_5_901735878.dbf

archive log thread 1 sequence 6 is already on disk as file/u01/backup/ceshiku/archivelog/1_6_901735878.dbf

archive log thread 1 sequence 7 is already on disk as file/u01/backup/ceshiku/archivelog/1_7_901735878.dbf

archive log filename=/u01/backup/ceshiku/archivelog/1_4_901735878.dbfthread=1 sequence=4

archive log filename=/u01/backup/ceshiku/archivelog/1_5_901735878.dbfthread=1 sequence=5

archive log filename=/u01/backup/ceshiku/archivelog/1_6_901735878.dbfthread=1 sequence=6

archive log filename=/u01/backup/ceshiku/archivelog/1_7_901735878.dbfthread=1 sequence=7

unable to find archive log

archive log thread=1 sequence=8

RMAN-00571: ===========================================================

RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============

RMAN-00571: ===========================================================

RMAN-03002: failure of recover command at 01/21/2016 19:41:13

RMAN-06054: media recovery requesting unknown log: thread 1 seq 8 lowscn9671019808993

因为缺少online redolog，所以提示找不到thread 1 seq 8日志组，我们可以在recover database时候，通过set until scn或者setuntil time命令设置恢复到的scn号或时间。就可以避免这个错误。

 

查询下v$datafile_header记录的scn和v$datafile记录的scn，以及系统scn，还有数据文件终止scn，如下：

SQL> selectname,to_char(checkpoint_change#) from v$datafile_header;

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/system01.dbf

9671019808993

 

/u01/oracle/oradata/oric/undotbs01.dbf

9671019808993

 

/u01/oracle/oradata/oric/sysaux01.dbf

9671019808993

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/users01.dbf

9671019808993

 

/u01/oracle/oradata/oric/cs_dir01.dbf

9671019808993

 

/u01/oracle/oradata/oric/CS_DIR02.dbf

9671019808993

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/aa01.dbf

9671019808993

 

/u01/oracle/oradata/oric/b01.dbf

9671019808993

 

/u01/oracle/oradata/oric/cs_dir03.dbf

9671019808993

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/b02.dbf

9671019808993

 

10 rows selected.

SQL> selectname,to_char(checkpoint_change#) from v$datafile;

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/system01.dbf

9671019808993

 

/u01/oracle/oradata/oric/undotbs01.dbf

9671019808993

 

/u01/oracle/oradata/oric/sysaux01.dbf

9671019808993

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/users01.dbf

9671019808993

 

/u01/oracle/oradata/oric/cs_dir01.dbf

9671019808993

 

/u01/oracle/oradata/oric/CS_DIR02.dbf

9671019808993

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/aa01.dbf

9671019808993

 

/u01/oracle/oradata/oric/b01.dbf

9671019808993

 

/u01/oracle/oradata/oric/cs_dir03.dbf

9671019808993

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/b02.dbf

9671019808993

 

10 rows selected.

SQL> selectto_char(checkpoint_change#) from v$database;

 

TO_CHAR(CHECKPOINT_CHANGE#)

----------------------------------------

9671019808993

SQL> selectname,to_char(last_change#) from v$datafile;

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(LAST_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/system01.dbf

 

/u01/oracle/oradata/oric/undotbs01.dbf

 

/u01/oracle/oradata/oric/sysaux01.dbf

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(LAST_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/users01.dbf

 

/u01/oracle/oradata/oric/cs_dir01.dbf

 

/u01/oracle/oradata/oric/CS_DIR02.dbf

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(LAST_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/aa01.dbf

 

/u01/oracle/oradata/oric/b01.dbf

 

/u01/oracle/oradata/oric/cs_dir03.dbf

 

NAME

--------------------------------------------------------------------------------

TO_CHAR(LAST_CHANGE#)

----------------------------------------

/u01/oracle/oradata/oric/b02.dbf

 

10 rows selected.

数据库重新启动的时候，Oracle将文件头中的那个启动scn（v$datafile_header中记录的scn）与数据库文件检查点scn进行比较，如果这两个值相互匹配，oracle接下来还要比较数据文件头中的启动scn和控制文件中数据文件的终止scn。如果这两个值也一致，就意味着所有数据块多已经提交，所有对数据库的修改都没有在关闭数据库的过程中丢失，因此这次启动数据库的过程也不需要任何恢复操作，此时数据库就可以打开了。当所有的数据库都打开之后，存储在控制文件中的数据文件终止scn的值再次被更改为null，这表示数据文件已经打开并能够正常使用了。如果数据库是异常关闭或者通过不完全恢复过来的，那么终止scn会是null，所以启动数据库时，就需要做实例恢复，利用online redolog来恢复数据库，这也就是实例启动时，SMON进程会去利用redolog做恢复，俗称‘前滚‘数据库。

通过查询上述SCN号，我们可以看到，我们做了不完全恢复，需要以open resetlogs方式打开数据库。

 

尝试openresetlogs启动数据库

SQL> alter database openresetlogs;

alter database open resetlogs

*

ERROR at line 1:

ORA-00344: unable to re-createonline log

'/u01/oracle/oradata/ceshiku/redo01.log'

ORA-27040: file create error,unable to create file

Linux-x86_64 Error: 2: No suchfile or directory

发现启动不了的，提示不能创建redo01.log，没有此目录（我是把/u01/oracle/oradata/ceshiku这个目录改名了，异构系统的话，也不会存在源库这样的目录，比如windows到linux）

 

接下来我们查询日志文件信息，如下：

SQL> select * fromv$logfile;

    GROUP# STATUS  TYPE

---------- ------- -------

MEMBER

--------------------------------------------------------------------------------

IS_

---

         2         ONLINE

/u01/oracle/oradata/ceshiku/redo02.log

NO

         1         ONLINE

/u01/oracle/oradata/ceshiku/redo01.log

NO

    GROUP# STATUS  TYPE

---------- ------- -------

MEMBER

--------------------------------------------------------------------------------

IS_

---

         3         ONLINE

/u01/oracle/oradata/ceshiku/redo03.log

NO

可以看到控制文件记录的日志信息还是源库的，查询v$log视图

SQL> select sequence#,group#,status from v$log;

 SEQUENCE#     GROUP# STATUS
---------- ---------- ----------------
        8          1 CURRENT
        9          2 INACTIVE
        10          3 INACTIVE

可以看到日志8处于current，那么想通过新增日志组，删除8,9,10日志组是不行的，因为current日志组是不能删掉的。

 

我们虽然不能删除8这个日志组，但是可以新增日志组文件，然后重建控制文件，清除控制文件保留的日志信息，然后以open resetlogs方式打开数据库。具体操作如下：

SQL> alter database addlogfile group 4'/u01/oracle/oradata/oric/redo04.dbf' size 50M;

 

Database altered.

 

SQL> alter database addlogfile group 5 '/u01/oracle/oradata/oric/redo05.dbf' size 50M;

 

Database altered.

 

SQL> alter database addlogfile group 6 '/u01/oracle/oradata/oric/redo06.dbf' size 50M;

 

Database altered.

 

备份控制文件到trace文件

SQL> alter database backupcontrolfile to trace as '/home/oracle/aaa.ctl';

 

Database altered.

然后打开这个trace文件，摘出里面重建控制文件，制作脚本。

关闭数据库，重新启动到nomount，然后重建控制文件。（注意，以resetlogs方式重建控制文件）

SQL> shutdown immediate;

ORA-01109: database not open

 

 

Database dismounted.

ORACLE instance shut down.

SQL> STARTUP NOMOUNT;

ORACLE instance started.

 

Total System Global Area1073741824 bytes

Fixed Size                  2101608 bytes

Variable Size             260050584 bytes

Database Buffers          788529152 bytes

Redo Buffers               23060480 bytes

SQL> CREATE CONTROLFILE REUSEDATABASE "CESHIDB" RESETLOGS ARCHIVELOG
 2  MAXLOGFILES 16
 3  MAXLOGMEMBERS 3
 4  MAXDATAFILES 100
 5  MAXINSTANCES 8
 6  MAXLOGHISTORY 292
 7  LOGFILE
 8  GROUP 4 '/u01/oracle/oradata/oric/redo04.dbf'  SIZE 50M,
 9  GROUP 5'/u01/oracle/oradata/oric/redo05.dbf' SIZE 50M,
 10 GROUP 6 '/u01/oracle/oradata/oric/redo06.dbf'  SIZE 50M
 11  --STANDBY LOGFILE
 12 DATAFILE
 13 '/u01/oracle/oradata/oric/system01.dbf',
 14 '/u01/oracle/oradata/oric/undotbs01.dbf',
 15 '/u01/oracle/oradata/oric/sysaux01.dbf',
 16 '/u01/oracle/oradata/oric/users01.dbf',
 17 '/u01/oracle/oradata/oric/cs_dir01.dbf',
 18 '/u01/oracle/oradata/oric/CS_DIR02.dbf',
 19 '/u01/oracle/oradata/oric/aa01.dbf',
 20 '/u01/oracle/oradata/oric/b01.dbf',

 21 '/u01/oracle/oradata/oric/cs_dir03.dbf ',

 22 '/u01/oracle/oradata/oric/b02.dbf'

 23 CHARACTER SET ZHS16GBK;

 

Control file created.

 然后以open resetlogs方式打开库。
SQL> alter database openresetlogs;
 Database altered.

完成后，还需要善后工作，重建temp表空间

SQL> create temporary tablespace TEMP1 TEMPFILE '/u01/oracle/oradata/oric/temp01.DBF'SIZE 512M REUSE AUTOEXTEND ON NEXT 1M MAXSIZE UNLIMITED;

 至此所有工作顺利完毕。

后记：之前看过很多人写的异机恢复数据库，目录结构也不同，在做完recover database，就以open resetlogs方式打开库了，然后才去处理online redolog和temp表空间，可是仔细想下下此问题，包括我上面的实验，可以看到，实际上是不能直接open resetlogs，因为控制文件属于源库的，还原到目标库上，在restoredatabase时，通过set new name for的方式把数据文件恢复到了新的目录上，通过switch datafile all，把数据文件的路径信息更新到控制文件中，但是onlineredolog的信息一点都没有变化的，所以在尝试直接open resetlogs启动数据库时，会报错的。除非你可以创建一个和源库一样的目录，来记录online redolog，然后open resetlogs后，在添加日志组，删除之前旧的日志组。（如果是异构系统，比如windows到linux，是创建不了这样的目录的，所以异构系统，建议采用上述方式来处理）
————————————————
版权声明：本文为CSDN博主「renhui1234」的原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接及本声明。
原文链接：https://blog.csdn.net/qq_22935429/java/article/details/50558321