HuaWei ❀ 配置RIPng的基本功能

配置RIPng的基本功能

如下图所示，在IPv6网络中使用RIPng使得网络互连；

配置接口IPv6地址：

[r1]ipv6      
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ipv6 enable 
[r1-GigabitEthernet0/0/0]ipv6 address 1001::1/64

配置RIPng：

[r1]ripng 1
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ripng 1 enable 

[r2]ripng 1
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ripng 1 enable 
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ripng 1 enable

[r3]ripng 1
[r3]int g0/0/1
[r3-GigabitEthernet0/0/1]ripng 1 enable

查看配置结果：

[r1]display ipv6 routing-table protocol ripng 
Public Routing Table : RIPng
Summary Count : 1

RIPng Routing Table's Status : < Active >
Summary Count : 1 

 Destination  : 1002::                          PrefixLength : 64
 NextHop      : FE80::2E0:FCFF:FE89:5D4C        Preference   : 100
 Cost         : 1                               Protocol     : RIPng
 RelayNextHop : ::                              TunnelID     : 0x0
 Interface    : GigabitEthernet0/0/0            Flags        : D

RIPng Routing Table's Status : < Inactive >
Summary Count : 0