Netty系列-netty的初体验

一、前言

   最近看了netty源码，打算写个博客记下来，方便后面再复习，同时希望也能方便看到的人，在研究netty的时候，多少能方便点。

二、环境搭建

   git clone netty的代码下来，或者可以fork到自己的git 仓库，然后git clone下来。

  后面的版本统一用

<dependency>
    <groupId>io.netty</groupId>
    <artifactId>netty-all</artifactId>
    <version>4.1.6.Final</version>
</dependency>

三、例子研究

如下是服务端标准的代码案例，bossgroup主要是用来接收连接请求的，workergroup主要是用来处理读写请求的

 1    EventLoopGroup bossGroup = new NioEventLoopGroup(1);
 2         EventLoopGroup workerGroup = new NioEventLoopGroup();
 3         final EchoServerHandler serverHandler = new EchoServerHandler();
 4         try {
 5             ServerBootstrap b = new ServerBootstrap();
 6             b.group(bossGroup, workerGroup)
 7              .channel(NioServerSocketChannel.class)
 8              .option(ChannelOption.SO_BACKLOG, 100)
 9              .handler(new LoggingHandler(LogLevel.INFO))
10              .childHandler(new ChannelInitializer<SocketChannel>() {
11                  @Override
12                  public void initChannel(SocketChannel ch) throws Exception {
13                      ChannelPipeline p = ch.pipeline();
14                      if (sslCtx != null) {
15                          p.addLast(sslCtx.newHandler(ch.alloc()));
16                      }
17                      //p.addLast(new LoggingHandler(LogLevel.INFO));
18                      p.addLast(serverHandler);
19                  }
20              });
21 
22             // Start the server.
23             ChannelFuture f = b.bind(PORT).sync();

前面5-20都是初始化，我们先看23行，bind方法，一路跟下去，分为三部分

 1 private ChannelFuture doBind(final SocketAddress localAddress) {
 2         final ChannelFuture regFuture = initAndRegister();
 3         final Channel channel = regFuture.channel();
 4         if (regFuture.cause() != null) {
 5             return regFuture;
 6         }
 7 
 8         if (regFuture.isDone()) {
 9             // At this point we know that the registration was complete and successful.
10             ChannelPromise promise = channel.newPromise();
11             doBind0(regFuture, channel, localAddress, promise);
12             return promise;
13         } else {
14             // Registration future is almost always fulfilled already, but just in case it's not.
15             final PendingRegistrationPromise promise = new PendingRegistrationPromise(channel);
16             regFuture.addListener(new ChannelFutureListener() {
17                 @Override
18                 public void operationComplete(ChannelFuture future) throws Exception {
19                     Throwable cause = future.cause();
20                     if (cause != null) {
21                         // Registration on the EventLoop failed so fail the ChannelPromise directly to not cause an
22                         // IllegalStateException once we try to access the EventLoop of the Channel.
23                         promise.setFailure(cause);
24                     } else {
25                         // Registration was successful, so set the correct executor to use.
26                         // See https://github.com/netty/netty/issues/2586
27                         promise.registered();
28 
29                         doBind0(regFuture, channel, localAddress, promise);
30                     }
31                 }
32             });
33             return promise;
34         }
35     }

第一是 initAndRegister方法

 在这里，channelFactory啥时候初始化的？我们回到标准案例那里

 跟进去看看

public B channel(Class<? extends C> channelClass) {
        if (channelClass == null) {
            throw new NullPointerException("channelClass");
        }
        return channelFactory(new ReflectiveChannelFactory<C>(channelClass));
    }

跟到底会发现下面这段

public B channelFactory(ChannelFactory<? extends C> channelFactory) {
        if (channelFactory == null) {
            throw new NullPointerException("channelFactory");
        }
        if (this.channelFactory != null) {
            throw new IllegalStateException("channelFactory set already");
        }
        //初始化cannelFactory
        this.channelFactory = channelFactory;
        return self();
    }

所以很明显，cannelFactory是ReflectiveChannelFactory，我们继续看ReflectiveChannelFactory的newChannel方法

 public T newChannel() {
        try {
            return clazz.getConstructor().newInstance();
        } catch (Throwable t) {
            throw new ChannelException("Unable to create Channel from class " + clazz, t);
        }
    }

这就可以看出，channel的创建是通过工厂模式，反射创建无参构造函数的，实例就是我们初始化传进去的 NioServerSocketChannel，我们把channel的创建看完，继续跟它的构造函数

private static final SelectorProvider DEFAULT_SELECTOR_PROVIDER = SelectorProvider.provider();

public NioServerSocketChannel() {
        this(newSocket(DEFAULT_SELECTOR_PROVIDER));
    }

DEFAULT_SELECTOR_PROVIDER 是根据操作系统选择的provider，而newSocket其实就是根据provider到jdk底层去获取对应的serversockerchannel，我们继续this，

public NioServerSocketChannel(ServerSocketChannel channel) {
        super(null, channel, SelectionKey.OP_ACCEPT);
        config = new NioServerSocketChannelConfig(this, javaChannel().socket());
    }

调用父类的构造方法，注意参数 SelectionKey.OP_ACCEPT，继续

protected AbstractNioChannel(Channel parent, SelectableChannel ch, int readInterestOp) {
        super(parent);
        this.ch = ch;
        this.readInterestOp = readInterestOp;
        try {
            ch.configureBlocking(false);
        } catch (IOException e) {
            try {
                ch.close();
            } catch (IOException e2) {
                if (logger.isWarnEnabled()) {
                    logger.warn(
                            "Failed to close a partially initialized socket.", e2);
                }
            }

            throw new ChannelException("Failed to enter non-blocking mode.", e);
        }
    }

这个构造函数就是把前面生成的channel和accept事件保存起来，并设置该channel为非阻塞模式，是不是就是nio的代码方式，我们继续看super

protected AbstractChannel(Channel parent) {
        this.parent = parent;
        id = newId();
        unsafe = newUnsafe();
        pipeline = newChannelPipeline();
    }

id我们暂时不管，这里会生成一个unsafe 来操作bytebuffer的，还生成了pipeline，这个主要是为了执行我们初始化设定的一些handdler，我们后面分析；到这里把channel的初始化分析完了，回到之前的initAndRegister方法，我们继续往下看有个init方法，它有两个实现，一个是客户端的BootStrap，一个是服务端的ServerBootStrap，做的事情都差不多，我们看下ServerBootStrap的，

@Override
    void init(Channel channel) throws Exception {
        // 把代码启动的时候设置的参数放到它该有的位置上
        final Map<ChannelOption<?>, Object> options = options0();
        synchronized (options) {
             // options设置到channel上
            setChannelOptions(channel, options, logger);
        }

        final Map<AttributeKey<?>, Object> attrs = attrs0();
        synchronized (attrs) {
            // 遍历attr事件，设置到channel上
            for (Entry<AttributeKey<?>, Object> e: attrs.entrySet()) {
                @SuppressWarnings("unchecked")
                AttributeKey<Object> key = (AttributeKey<Object>) e.getKey();
                channel.attr(key).set(e.getValue());
            }
        }

        ChannelPipeline p = channel.pipeline();
            ......

        // 把所有handler组装成pipeline
        p.addLast(new ChannelInitializer<Channel>() {
            @Override
            public void initChannel(final Channel ch) throws Exception {
                final ChannelPipeline pipeline = ch.pipeline();
                ChannelHandler handler = config.handler();
                if (handler != null) {
                    pipeline.addLast(handler);
                }

                ch.eventLoop().execute(new Runnable() {
                    @Override
                    public void run() {
                        pipeline.addLast(new ServerBootstrapAcceptor(
                                ch, currentChildGroup, currentChildHandler, currentChildOptions, currentChildAttrs));
                    }
                });
            }
        });
    }            

省略了些代码，主要还是把之前一开始初始化保存的对象绑到对应的channel上，然后放到一个 inboundhandler类型-ServerBootstrapAcceptor对象上，并给放到pipeline 链上。

我们继续看initAndRegister的另一行代码

ChannelFuture regFuture = config().group().register(channel);

 config().group()，在这里是 NioEventLoopGroup，register执行的是它的父类 MultithreadEventLoopGroup

public ChannelFuture register(Channel channel) {
        return next().register(channel);
    }

next方法有两种实现，在NioEventLoopGroup初始化的时候会调用它的父类构造函数，如果线程数是2的次方就实例化 PowerOfTwoEventExecutorChooser，否则就是GenericEventExecutorChooser，我们看看两个实现的有啥区别

PowerOfTwoEventExecutorChooser：
public EventExecutor next() {
            return executors[idx.getAndIncrement() & executors.length - 1];
        }


GenericEventExecutorChooser：
public EventExecutor next() {
            return executors[Math.abs(idx.getAndIncrement() % executors.length)];
        }

一个按位与，一个是取模运算，明显按位与快一点，所以推荐设置2的n次方

讲完chooser选择后，继续看register，因为我们是 NioEventLoop，它继承于 SingleThreadEventLoop，所以我们看它的register

public ChannelFuture register(final ChannelPromise promise) {
        ObjectUtil.checkNotNull(promise, "promise");
        promise.channel().unsafe().register(this, promise);
        return promise;
    }

从DefaultChannelPromise 拿到niosocketchannel，拿到对应的unsafe，而 AbstractUnsafe 是 AbstractChannel的内部类，

public final void register(EventLoop eventLoop, final ChannelPromise promise) {
           ......
            AbstractChannel.this.eventLoop = eventLoop;

            if (eventLoop.inEventLoop()) {
                register0(promise);
            } else {
                try {
                    eventLoop.execute(new Runnable() {
                        @Override
                        public void run() {
                            register0(promise);
                        }
                    });
                } 
            }
        }

继续看 register0

private void register0(ChannelPromise promise) {
               .......
                doRegister();
               .......
                // Ensure we call handlerAdded(...) before we actually notify the promise. This is needed as the
                // user may already fire events through the pipeline in the ChannelFutureListener.
                pipeline.invokeHandlerAddedIfNeeded();

                safeSetSuccess(promise);
                pipeline.fireChannelRegistered();
                // Only fire a channelActive if the channel has never been registered. This prevents firing
                // multiple channel actives if the channel is deregistered and re-registered.
               .......
        }

继续 doRegister

protected void doRegister() throws Exception {
        boolean selected = false;
        for (;;) {
            try {
                selectionKey = javaChannel().register(eventLoop().unwrappedSelector(), 0, this);
                return;
            }
        }
    }

调用底层的jdk channel来注册selector，拿到一个selectionKey，initAndRegister方法算是结束了，主要是初始化channel和注册selector的，接下来看看 doBind0 方法，

private static void doBind0(
            final ChannelFuture regFuture, final Channel channel,
            final SocketAddress localAddress, final ChannelPromise promise) {

        // This method is invoked before channelRegistered() is triggered.  Give user handlers a chance to set up
        // the pipeline in its channelRegistered() implementation.
        channel.eventLoop().execute(new Runnable() {
            @Override
            public void run() {
                if (regFuture.isSuccess()) {
                    // 通过pipeline 从tail到head节点执行，最终在对应的NioServerSocketChannel执行bind方法
                    channel.bind(localAddress, promise).addListener(ChannelFutureListener.CLOSE_ON_FAILURE);
                } else {
                    promise.setFailure(regFuture.cause());
                }
            }
        });
    }

我们继续往下跟会发现，扔给线程池的任务异步执行，从AbstractChannel开始做bind操作，通过每个channel对应的 DefaultChannelPipeline 来执行bind，最终会通过 pipeline 从tail执行到head节点，最终跑到NioServerSocketChannel 类

protected void doBind(SocketAddress localAddress) throws Exception {
        // 最终执行到jdk底层的 bind方法
        if (PlatformDependent.javaVersion() >= 7) {
            javaChannel().bind(localAddress, config.getBacklog());
        } else {
            javaChannel().socket().bind(localAddress, config.getBacklog());
        }
    }

最终bind 方法执行完毕。