【概述】
Ubuntu Server 18.04 中用 netplan 取代了 ifupdown,配置文件在 /etc/netplan/ 目录下,文件格式为 yaml,使配置文件生效的命令为 sudo netplan apply。
~ $ cat /etc/network/interfaces
ifupdown has been replaced by netplan(5) on this system. See
/etc/netplan for current configuration.
To re-enable ifupdown on this system, you can run:
sudo apt install ifupdown
auto dsl-provider
iface dsl-provider inet ppp
pre-up /bin/ip link set enp3s0 up # line maintained by pppoeconf
provider dsl-provider
auto enp3s0
iface enp3s0 inet manual
【检查网卡是否已插入网线】
1 表示有;0 表示没有
$ cat /sys/class/net/enp2s0/carrier
1
【查看网卡状态】
$ sudo mii-tool enp2s0
enp2s0: negotiated 1000baseT-HD flow-control, link ok
【重启指定网卡】
关闭
$ sudo ifconfig enp3s0 down
开启
$ sudo ifconfig enp3s0 up
【典型配置】
/etc/netplan/50-cloud-init.yaml
network:
ethernets:
# 静态IP
enp2s0:
dhcp4: false
addresses:
- 192.168.0.145/24
gateway4: 192.168.0.1
nameservers:
addresses:
- 223.5.5.5
search: []
optional: true
# 动态IP
enp4s0:
dhcp4: true
# 若没有下面这一句
# 向服务器发送的“mac”地址会是类似
# “5de26c1500020000ab1102df86200698a807”
# 的奇怪字符串
# 实际上这是 DUID
dhcp-identifier: mac
optional: true
version: 2
多网卡下静态路由无效(不生效)的一种解决方案:How can I configure default route metric with dhcp and netplan?
示例
network:
ethernets:
enp2s0:
dhcp4: false
addresses:
- 192.168.30.36/24
# gateway4: 192.168.30.1
routes:
- to: 192.168.0.0/16
via: 192.168.30.1
metric: 50
nameservers:
addresses:
- 223.5.5.5
search: []
optional: true
enp3s0:
dhcp4: true
dhcp-identifier: mac
optional: true
version: 2
【DNS】
如果上面配置的 dns 并没有什么卵用(可能是受 iptables 防火墙规则的影响),可以清空 iptables 命令排查,也可以直接修改 /etc/resolv.conf 文件。
nameserver 223.5.5.5
如果修改后又被改回 127.0.0.53,可以停用 systemd-resolved 服务。
sudo systemctl disable systemd-resolved
sudo 很慢?在 /etc/hosts 添加 hostname 到 127.0.0.1 的映射。
清空 iptables 命令
sudo iptables -F
sudo iptables -X
sudo iptables -t nat -F
sudo iptables -t nat -X
sudo iptables -t mangle -F
sudo iptables -t mangle -X
sudo iptables -P INPUT ACCEPT
sudo iptables -P FORWARD ACCEPT
sudo iptables -P OUTPUT ACCEPT
【PPPoE 拨号上网】
安装 pppoeconf
sudo apt install pppoeconf
配置
sudo pppoeconf
手动连接
sudo pon dsl-provider
手动断开
sudo poff dsl-provider
查看状态
sudo plog
查看接口信息
sudo ip addr show ppp0
【查看网络接口信息】
sudo ifconfig -a
or
sudo ip addr show
linux 网卡ppp0与ppp1来回切换、不断重连
ping 不正常工作原因
【路由】
摘自:Linux下路由配置梳理
查看路由
route -n
添加到主机的路由
route add -host 192.168.1.2 dev eth0:0
route add -host 10.20.30.148 gw 10.20.30.40
添加到网络的路由
route add -net 10.20.30.40 netmask 255.255.255.248 eth0
route add -net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
route add -net 192.168.1.0/24 eth1
route add -net 192.168.0.0/16 gw 192.168.30.1
添加默认路由
route add default gw 192.168.1.1
删除路由
route del -host 192.168.1.2 dev eth0:0
route del -host 10.20.30.148 gw 10.20.30.40
route del -net 10.20.30.40 netmask 255.255.255.248 eth0
route del -net 10.20.30.48 netmask 255.255.255.248 gw 10.20.30.41
route del -net 192.168.1.0/24 eth1
route del default gw 192.168.1.1 # route del default 删除所有的默认路由
添加一条默认路由
route add default gw 10.0.0.1 # 默认只在内存中生效
开机自启动可以追加到/etc/rc.local文件里
echo “route add default gw 10.0.0.1” >>/etc/rc.local
添加一条静态路由
route add -net 192.168.2.0/24 gw 192.168.2.254
要永久生效的话要这样做:
echo “any net 192.168.2.0/24 gw 192.168.2.254” >>/etc/sysconfig/static-routes
添加到一台主机的静态路由
route add -host 192.168.2.2 gw 192.168.2.254
要永久生效的话要这样做:
echo "any host 192.168.2.2 gw 192.168.2.254 " >>/etc/sysconfig/static-routes
注:Linux 默认没有这个文件 ,得手动创建一个
添加路由报错 SIOCADDRT: Network is unreachable,是因为出口地址对主机来说广播不可达,具体来说有两种可能情况:1、出口地址与主机不在同一个网段;2、出口地址与主机在同一个网段,但广播路由被无意删除了。广播路由示例(红框内即为广播路由):
15294599881708.png