H3C HCL 堆叠 链路聚合项目模拟

项目要求，不同的IRF中的同一vlan可以相互访问
设计堆叠和链路聚合

图中有13个设备，1-6 是交换机，7-13是PC机，
目的：13号设备可以访问10号设备具体如下

组网图,按下图连线组网

1. 左边管理交换机
划分member,优先级
交换机1和2使用双线40g光口堆叠，并划分vlan 100 300
设置链路聚合端口 1 ，并涵盖1/0/1 2/0/1 端口
vlan 100 : 2/0/3 , vlan 300 :1/0/2 2/0/2
设置 pc13 /192.168.1.13 /vlan 100
pc11 /192,168.3.11 /vlan 300
pc12 /192.168.3.12 /vlan 300
2. 右边业务交换机
划分member,优先级
交换机3-6 ，使用单线40g光口堆叠，并划分vlan 100 200
设置链路聚合口 3/0/1 5/0/1 ,trunk permit all vlan
vlan 100 :3/0/2 4/0/2 ;vlan 200 :5/0/2 6/0/2
设置pc7 :192.168.2.7 , pc8 :192.168.2.8
pc9:192.168.1.9 ,pc10:192.168.1.10

一 左边 1和2 号交换机堆叠
1号交换机

<H3C>sys
[H3C]irf member 1 priority 10
[H3C]interface FortyGigE 1/0/53
[H3C-FortyGigE1/0/53]shutdown
[H3C-FortyGigE1/0/53]interface FortyGigE 1/0/54
[H3C-FortyGigE1/0/54]shutdown
[H3C-FortyGigE1/0/54]quit
[H3C]irf-port 1/2
[H3C-irf-port1/2]port group interface FortyGigE 1/0/53
[H3C-irf-port1/2]port group interface FortyGigE 1/0/54
[H3C-irf-port1/2]quit
[H3C]interface FortyGigE 1/0/53
[H3C-FortyGigE1/0/53]undo shutdown
[H3C-FortyGigE1/0/53]interface FortyGigE 1/0/54
[H3C-FortyGigE1/0/54]undo shutdown
[H3C-FortyGigE1/0/54]quit
[H3C]save
[H3C]irf-port-configuration active
[H3C]dis irf
MemberID    Role    Priority  CPU-Mac         Description
 *+1        Master  10        2ecd-6f6b-0104  ---
--------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in.

2号交换机

<H3C>sys
[H3C]irf member 1 renumber 2
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
[H3C]quit
<H3C>reboot
Press ENTER to get started.
<H3C>sys
[H3C]display irf
MemberID    Role    Priority  CPU-Mac         Description
 *+2        Master  1         28be-3dcf-0204  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in
[H3C]interface FortyGigE 2/0/53
[H3C-FortyGigE2/0/53]shutdown
[H3C-FortyGigE2/0/53]interface FortyGigE 2/0/54
[H3C-FortyGigE2/0/54]shutdown
[H3C-FortyGigE2/0/54]quit
[H3C]irf-port 2/1
[H3C-irf-port2/1]port group interface FortyGigE 2/0/53
[H3C-irf-port2/1]port group interface FortyGigE 2/0/54
[H3C-irf-port2/1]quit
[H3C]interface FortyGigE 2/0/53
[H3C-FortyGigE2/0/53]undo shutdown
[H3C-FortyGigE2/0/53]interface FortyGigE 2/0/54
[H3C-FortyGigE2/0/54]undo shutdown
[H3C-FortyGigE2/0/54]quit
[H3C]save
[H3C]irf-port-configuration active
[H3C]dis irf
MemberID    Role    Priority  CPU-Mac         Description
 *+2        Master  1         28be-3dcf-0204  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in

设置好之后，进入1号交换机查询堆叠结果。

[H3C]dis irf link
Member 1
 IRF Port  Interface                             Status
 1         disable                               --
 2         FortyGigE1/0/53                       UP
           FortyGigE1/0/54                       UP
Member 2
 IRF Port  Interface                             Status
 1         FortyGigE2/0/53                       UP
           FortyGigE2/0/54                       UP
 2         disable                               --

二 右边3 4 5 6 四个交换机堆叠
先把四个交换机的member priority 改了 重启
交换机3 设置优先级最高 10

<H3C>sys
[H3C]irf member 1 renumber 3
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
[H3C]quit
<H3C>reboot
Press ENTER to get started.
<H3C>sys
[H3C]irf member 1 priority 10
[H3C]interface FortyGigE 3/0/53
[H3C-FortyGigE3/0/53]shutdown
[H3C-FortyGigE3/0/53]interface FortyGigE 3/0/54
[H3C-FortyGigE3/0/54]shutdown
[H3C-FortyGigE3/0/54]quit
[H3C]irf-port 3/1
[H3C-irf-port3/1]port group interface FortyGigE 3/0/53
[H3C-irf-port3/1]quit
[H3C]irf-port3/2
[H3C-irf-port3/2]port group interface FortyGigE 3/0/54
[H3C-irf-port3/2]quit
[H3C]interface FortyGigE 3/0/53
[H3C-FortyGigE3/0/53]undo shutdown
[H3C-FortyGigE3/0/53]interface FortyGigE 3/0/54
[H3C-FortyGigE3/0/54]undo shutdown
[H3C-FortyGigE3/0/54]quit
[H3C]save
[H3C]irf-port-configuration active

4 5 6 三个交换机和3号设置一样，需要修改member 为 4 5 6 ，优先级不设置，四个全部设置好后，随便登录一个交换机查证

[H3C]dis irf
MemberID    Role    Priority  CPU-Mac         Description
 *+3        Master  10        2ecd-834f-0304  ---
   4        Standby 1         2ecd-889c-0404  ---
   5        Standby 1         2ecd-8ed5-0504  ---
   6        Standby 1         2ecd-9264-0604  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in.

 The bridge MAC of the IRF is: 2ecd-834f-0300
 Auto upgrade                : yes
 Mac persistent              : 6 min
 Domain ID                   : 0

三 ，堆叠完成后，测试同一IRF中的vlan划分，先把PC 设备 7 8 9 10 11 12 按图中部署好
1. 左边
划分vlan 100 300
vlan 100 : 2/0/3 , vlan 300 :1/0/2 2/0/2
设置 pc13 /192.168.1.13 /vlan 100
pc11 /192,168.3.11 /vlan 300
pc12 /192.168.3.12 /vlan 300

启动交换机1终端

sys
System View: return to User View with Ctrl+Z.
[H3C]vlan 100
[H3C-vlan100]port GigabitEthernet 2/0/3
[H3C-vlan100]quit
[H3C]vlan 300
[H3C-vlan300]port GigabitEthernet 1/0/2
[H3C-vlan300]port GigabitEthernet 2/0/2
[H3C-vlan300]quit
[H3C]save
设置好后，使用PC机11终端就可以和12终端通信了，没有分配vlan之前是不可以的。

2. 右边
堆叠后，进入任意一个交换机终端，并划分vlan 100 200
vlan 100 :3/0/2 4/0/2 ;vlan 200 :5/0/2 6/0/2
设置pc7 :192.168.2.7 , pc8 :192.168.2.8
pc9:192.168.1.9 ,pc10:192.168.1.10

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]vlan 100
[H3C-vlan100]port GigabitEthernet 3/0/2
[H3C-vlan100]port GigabitEthernet 4/0/2
[H3C-vlan100]quit
[H3C]vlan 200
[H3C-vlan200]port GigabitEthernet 5/0/2
[H3C-vlan200]port GigabitEthernet 6/0/2
[H3C-vlan200]quit
[H3C]save

经过配置vlan之后，同一irf 内的同一网段之间的设备可以相互通讯了，但是13 号设备 虽然和10 9 设备在同一网段，是不能通讯的，已验证，要想可以通讯，必须对俩个irf之间进行链路聚合，对端口实行trunk,并允许相应的vlan报文通过。

四 对俩边的irf进行链路聚合，使得俩个irf可以相互通讯
链路聚合物理端口为1/0/1 2/0/1 3/0/1 5/0/1
先进入交换机1终端

[H3C]dis irf
MemberID    Role    Priority  CPU-Mac         Description
 *+1        Master  10        2ecd-6f6b-0104  ---
   2        Standby 1         2ecd-7a5b-0204  ---
--------------------------------------------------
<H3C>sys
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]quit
[H3C]interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]port link-aggregation group 1
[H3C-GigabitEthernet1/0/1]quit
[H3C]interface GigabitEthernet 2/0/1
[H3C-GigabitEthernet2/0/1]port link-aggregation group 1
[H3C-GigabitEthernet2/0/1]quit
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]port link-type trunk
   Configuring GigabitEthernet1/0/1 done.
   Configuring GigabitEthernet2/0/1 done.
[H3C-Bridge-Aggregation1]port trunk permit vlan 100 200 300
   Configuring GigabitEthernet1/0/1 done.
   Configuring GigabitEthernet2/0/1 done.
[H3C-Bridge-Aggregation1]quit
[H3C]save

先进入交换机3终端

<H3C>sys
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]port link-type trunk
[H3C-Bridge-Aggregation1]port trunk permit vlan 100 200 300
[H3C-Bridge-Aggregation1]quit
[H3C]interface GigabitEthernet 3/0/1
[H3C-GigabitEthernet3/0/1]port link-aggregation group 1
[H3C-GigabitEthernet3/0/1]quit
[H3C]interface GigabitEthernet 5/0/1
[H3C-GigabitEthernet5/0/1]port link-aggregation group 1
[H3C-GigabitEthernet5/0/1]quit
[H3C]display link-aggregation summary
[H3C]save

设置好之后，设备13 就可以 和设备10 通讯了 ，
HCL界面有CMD 命令查找功能，很详细

[H3C]display link-aggregation verbose Bridge-Aggregation 1

GE1/0/1 S 32768 1
GE2/0/1 S 32768 1