图片裁剪/滤镜渲染

其他 2018-10-26 16:08:25 阅读次数: 0

一、图片裁剪

//拖动手势

- (void)handlePanGes:(PanGesRec *)panGes
{
    CGPoint translation = [panGes translationInView:self.imgView.superview];
    CGPoint movePoint = panGes.movedPoint;
    
    //判断开始滑动时的滑动对象:top、bottom、left、right
    if (panGes.state == GR_BEGIN) {
        
        //再次开始移动，shaView整体高亮
        [UIView animateWithDuration:0.5 animations:^{
            self.shaView.isSetShadow = NO;
        }];
        
        if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge+SHORT_LINE_LENGTH MaxX:self.clipAreaLayer.rightEdge-SHORT_LINE_LENGTH MinY:self.clipAreaLayer.topEdge-PANGR_OFFET MaxY:self.clipAreaLayer.topEdge+PANGR_OFFET]) {
            self.acGeView = CLIP_AREA_TOP;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge+SHORT_LINE_LENGTH MaxX:self.clipAreaLayer.rightEdge-SHORT_LINE_LENGTH MinY:self.clipAreaLayer.bottomEdge-PANGR_OFFET MaxY:self.clipAreaLayer.bottomEdge+PANGR_OFFET]) {
            self.acGeView = CLIP_AREA_BOTTOM;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge-PANGR_OFFET MaxX:self.clipAreaLayer.leftEdge+PANGR_OFFET MinY:self.clipAreaLayer.topEdge+SHORT_LINE_LENGTH MaxY:self.clipAreaLayer.bottomEdge-SHORT_LINE_LENGTH]) {
            self.acGeView = CLIP_AREA_LEFT;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.rightEdge-PANGR_OFFET MaxX:self.clipAreaLayer.rightEdge+PANGR_OFFET MinY:self.clipAreaLayer.topEdge+SHORT_LINE_LENGTH MaxY:self.clipAreaLayer.bottomEdge-SHORT_LINE_LENGTH]) {
            self.acGeView = CLIP_AREA_RIGHT;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge-PANGR_OFFET MaxX:self.clipAreaLayer.leftEdge+PANGR_OFFET MinY:self.clipAreaLayer.topEdge MaxY:self.clipAreaLayer.topEdge+SHORT_LINE_LENGTH] || [self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge MaxX:self.clipAreaLayer.leftEdge+SHORT_LINE_LENGTH MinY:self.clipAreaLayer.topEdge-PANGR_OFFET MaxY:self.clipAreaLayer.topEdge+PANGR_OFFET]){
            self.acGeView = CLIP_AREA_LT;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge-PANGR_OFFET MaxX:self.clipAreaLayer.leftEdge+PANGR_OFFET MinY:self.clipAreaLayer.bottomEdge-SHORT_LINE_LENGTH MaxY:self.clipAreaLayer.bottomEdge] || [self judgeGesRecInViewWithMinX:self.clipAreaLayer.leftEdge MaxX:self.clipAreaLayer.leftEdge+SHORT_LINE_LENGTH MinY:self.clipAreaLayer.bottomEdge-PANGR_OFFET MaxY:self.clipAreaLayer.bottomEdge+PANGR_OFFET]){
            self.acGeView = CLIP_AREA_LB;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.rightEdge-PANGR_OFFET MaxX:self.clipAreaLayer.rightEdge+PANGR_OFFET MinY:self.clipAreaLayer.topEdge MaxY:self.clipAreaLayer.topEdge+SHORT_LINE_LENGTH] || [self judgeGesRecInViewWithMinX:self.clipAreaLayer.rightEdge-SHORT_LINE_LENGTH MaxX:self.clipAreaLayer.rightEdge MinY:self.clipAreaLayer.topEdge-PANGR_OFFET MaxY:self.clipAreaLayer.topEdge+PANGR_OFFET]){
            self.acGeView = CLIP_AREA_RT;
        } else if ([self judgeGesRecInViewWithMinX:self.clipAreaLayer.rightEdge-PANGR_OFFET MaxX:self.clipAreaLayer.rightEdge+PANGR_OFFET MinY:self.clipAreaLayer.bottomEdge-SHORT_LINE_LENGTH MaxY:self.clipAreaLayer.bottomEdge] || [self judgeGesRecInViewWithMinX:self.clipAreaLayer.rightEdge-SHORT_LINE_LENGTH MaxX:self.clipAreaLayer.rightEdge MinY:self.clipAreaLayer.bottomEdge-PANGR_OFFET MaxY:self.clipAreaLayer.bottomEdge+PANGR_OFFET]){
            self.acGeView = CLIP_AREA_RB;
        } else {
            self.acGeView = IMAGE_VIEW;
            [self.imgView setCenter:CGPointMake(self.imgView.center.x+translation.x, self.imgView.center.y+translation.y)];
            [panGes setTranslation:CGPointZero inView:self.imgView.superview];
        }
    }
    
    
    //滑动过程中位置改变
    CGFloat offsetX = 0;
    CGFloat offsetY = 0;
    if (panGes.state == GR_CHANGED) {
        switch (self.acGeView) {
            case CLIP_AREA_TOP:
            {
                offsetY = movePoint.y-self.clipAreaLayer.topEdge;
                
                if (offsetY >=0 && self.clipAreaHeight >= CLIP_AREA_MIN_WH) {
                    self.clipAreaHeight -= fabs(offsetY);
                    self.clipAreaLayer.topEdge += fabs(offsetY);
                } else if(offsetY < 0 && self.clipAreaLayer.topEdge >= CLIP_VIEW_TOP_MIN) {
                    self.clipAreaHeight += fabs(offsetY);
                    self.clipAreaLayer.topEdge -= fabs(offsetY);
                    [self scaleImgForTop];
                }
            }
                break;
            case CLIP_AREA_BOTTOM:
            {
                offsetY = movePoint.y-self.clipAreaLayer.bottomEdge;
                if (offsetY >= 0 && self.clipAreaLayer.bottomEdge <= SCREEN_HEIGHT-CLIP_VIEW_BOTTOM_MAX) {
                    self.clipAreaHeight += fabs(offsetY);
                    self.clipAreaLayer.bottomEdge += fabs(offsetY);
                    [self scaleImgForBottom];
                } else if (offsetY < 0 && self.clipAreaHeight >= CLIP_AREA_MIN_WH){
                    self.clipAreaHeight -= fabs(offsetY);
                    self.clipAreaLayer.bottomEdge -= fabs(offsetY);
                }
            }
                break;
            case CLIP_AREA_LEFT:
            {
                offsetX = movePoint.x-self.clipAreaLayer.leftEdge;
                if (offsetX >= 0 && self.clipAreaWidth >= CLIP_AREA_MIN_WH) {
                    self.clipAreaWidth -= fabs(offsetX);
                    self.clipAreaLayer.leftEdge += fabs(offsetX);
                }else if (offsetX < 0 && self.clipAreaLayer.leftEdge >= CLIP_VIEW_LR_MIN){
                    self.clipAreaWidth += fabs(offsetX);
                    self.clipAreaLayer.leftEdge -= fabs(offsetX);
                }
            }
                break;
            case CLIP_AREA_RIGHT:
            {
                offsetX = movePoint.x-self.clipAreaLayer.rightEdge;
                if (offsetX >= 0 && self.clipAreaLayer.rightEdge <= SCREEN_WIDTH-CLIP_VIEW_LR_MIN) {
                    self.clipAreaWidth += fabs(offsetX);
                    self.clipAreaLayer.rightEdge += fabs(offsetX);
                } else if (offsetX < 0 && self.clipAreaWidth >= CLIP_AREA_MIN_WH){
                    self.clipAreaWidth -= fabs(offsetX);
                    self.clipAreaLayer.rightEdge -= fabs(offsetX);
                }
            }
                break;
            case CLIP_AREA_LT:
            {
                offsetX = movePoint.x-self.clipAreaLayer.leftEdge;
                offsetY = movePoint.y-self.clipAreaLayer.topEdge;
                if (offsetX >= 0 && offsetY >= 0 && self.clipAreaWidth >= CLIP_AREA_MIN_WH && self.clipAreaHeight >= CLIP_AREA_MIN_WH) {
                    self.clipAreaWidth -= fabs(offsetX);
                    self.clipAreaHeight -= fabs(offsetY);
                    self.clipAreaLayer.leftEdge += fabs(offsetX);
                    self.clipAreaLayer.topEdge += fabs(offsetY);
                }else if (offsetX < 0 && offsetY < 0 && self.clipAreaLayer.leftEdge >= CLIP_VIEW_LR_MIN && self.clipAreaLayer.topEdge >= CLIP_VIEW_TOP_MIN){
                    self.clipAreaWidth += fabs(offsetX);
                    self.clipAreaHeight += fabs(offsetY);
                    self.clipAreaLayer.leftEdge -= fabs(offsetX);
                    self.clipAreaLayer.topEdge -= fabs(offsetY);
                    [self scaleImgForTop];
                }
            }
                break;
            case CLIP_AREA_LB:
            {
                offsetX = movePoint.x-self.clipAreaLayer.leftEdge;
                offsetY = movePoint.y-self.clipAreaLayer.bottomEdge;
                if (offsetX >= 0 && offsetY <= 0 && self.clipAreaWidth >= CLIP_AREA_MIN_WH && self.clipAreaHeight >= CLIP_AREA_MIN_WH) {
                    self.clipAreaWidth -= fabs(offsetX);
                    self.clipAreaHeight -= fabs(offsetY);
                    self.clipAreaLayer.leftEdge += fabs(offsetX);
                    self.clipAreaLayer.bottomEdge -= fabs(offsetY);
                }else if (offsetX < 0 && offsetY > 0 && self.clipAreaLayer.leftEdge >= CLIP_VIEW_LR_MIN && self.clipAreaLayer.bottomEdge <= SCREEN_HEIGHT-CLIP_VIEW_BOTTOM_MAX){
                    self.clipAreaWidth += fabs(offsetX);
                    self.clipAreaHeight += fabs(offsetY);
                    self.clipAreaLayer.leftEdge -= fabs(offsetX);
                    self.clipAreaLayer.bottomEdge += fabs(offsetY);
                    [self scaleImgForBottom];
                }
            }
                break;
            case CLIP_AREA_RT:
            {
                offsetX = movePoint.x-self.clipAreaLayer.rightEdge;
                offsetY = movePoint.y-self.clipAreaLayer.topEdge;
                if (offsetX <= 0 && offsetY >= 0 && self.clipAreaWidth >= CLIP_AREA_MIN_WH && self.clipAreaHeight >= CLIP_AREA_MIN_WH) {
                    self.clipAreaWidth -= fabs(offsetX);
                    self.clipAreaHeight -= fabs(offsetY);
                    self.clipAreaLayer.rightEdge -= fabs(offsetX);
                    self.clipAreaLayer.topEdge += fabs(offsetY);
                }else if (offsetX > 0 && offsetY < 0 && self.clipAreaLayer.rightEdge <= SCREEN_WIDTH-CLIP_VIEW_LR_MIN && self.clipAreaLayer.topEdge >= CLIP_VIEW_TOP_MIN){
                    self.clipAreaWidth += fabs(offsetX);
                    self.clipAreaHeight += fabs(offsetY);
                    self.clipAreaLayer.rightEdge += fabs(offsetX);
                    self.clipAreaLayer.topEdge -= fabs(offsetY);
                    [self scaleImgForTop];
                }
            }
                break;
            case CLIP_AREA_RB:
            {
                offsetX = movePoint.x-self.clipAreaLayer.rightEdge;
                offsetY = movePoint.y-self.clipAreaLayer.bottomEdge;
                if (offsetX <= 0 && offsetY <= 0 && self.clipAreaWidth >= CLIP_AREA_MIN_WH && self.clipAreaHeight >= CLIP_AREA_MIN_WH) {
                    self.clipAreaWidth -= fabs(offsetX);
                    self.clipAreaHeight -= fabs(offsetY);
                    self.clipAreaLayer.rightEdge -= fabs(offsetX);
                    self.clipAreaLayer.bottomEdge -= fabs(offsetY);
                }else if (offsetX > 0 && offsetY > 0 && self.clipAreaLayer.rightEdge <= SCREEN_WIDTH-CLIP_VIEW_LR_MIN && self.clipAreaLayer.bottomEdge <= SCREEN_HEIGHT-CLIP_VIEW_BOTTOM_MAX){
                    self.clipAreaWidth += fabs(offsetX);
                    self.clipAreaHeight += fabs(offsetY);
                    self.clipAreaLayer.rightEdge += fabs(offsetX);
                    self.clipAreaLayer.bottomEdge += fabs(offsetY);
                    [self scaleImgForBottom];
                }
            }
                break;
            case IMAGE_VIEW:
            {
                [self.imgView setCenter:CGPointMake(self.imgView.center.x + translation.x, self.imgView.center.y+translation.y)];
                [panGes setTranslation:CGPointZero inView:self.imgView.superview];
            }
                break;
            default:
                break;
        }
        if (self.acGeView != IMAGE_VIEW) {
            [self setUpClipLayer:NO];
        }
    }
    
    
    if (panGes.state == GR_ENDED) {
        
        if (self.acGeView == IMAGE_VIEW) {
            //修正imgView位置————必须铺满clipAreaLayer
            [UIView animateWithDuration:0.5 animations:^{
                if (CGRectGetMinY(self.imgView.frame)>self.clipAreaLayer.topEdge) {
                    self.imgView.frame = CGRectMake(CGRectGetMinX(self.imgView.frame), self.clipAreaLayer.topEdge, CGRectGetWidth(self.imgView.frame), CGRectGetHeight(self.imgView.frame));
                }
                
                if (CGRectGetMaxY(self.imgView.frame)<self.clipAreaLayer.bottomEdge) {
                    self.imgView.frame = CGRectMake(CGRectGetMinX(self.imgView.frame), self.clipAreaLayer.bottomEdge-CGRectGetHeight(self.imgView.frame), CGRectGetWidth(self.imgView.frame), CGRectGetHeight(self.imgView.frame));
                }
                
                if (CGRectGetMinX(self.imgView.frame)>self.clipAreaLayer.leftEdge) {
                    self.imgView.frame = CGRectMake(self.clipAreaLayer.leftEdge, CGRectGetMinY(self.imgView.frame), CGRectGetWidth(self.imgView.frame), CGRectGetHeight(self.imgView.frame));
                }
                
                if (CGRectGetMaxX(self.imgView.frame)<self.clipAreaLayer.rightEdge) {
                    self.imgView.frame = CGRectMake(self.clipAreaLayer.rightEdge-CGRectGetWidth(self.imgView.frame), CGRectGetMinY(self.imgView.frame), CGRectGetWidth(self.imgView.frame), CGRectGetHeight(self.imgView.frame));
                }
            }];
        }else{
            
            /*
             思路：滑动结束后位置修正
             1.clipAreaLayer的移动后会回到中心点和宽都固定的位置；
             2.clipAreaLayer的缩放：宽固定——如果高度超过最大值——固定高度为最大值——再确定宽度；
             3.imgView的缩放：根据clipAreaLayer的缩放比例来确定宽高；
             4.imgView的位置：以clipAreaLayer为基准并根据缩放前的上边和左边的相对位置的缩放量，来确定；
             */
            
            [NSThread sleepForTimeInterval:0.3];
            //        [self animationForPosition];//移动动画效果——待解决
            
            [UIView animateWithDuration:ANI_DURA animations:^{
                
                //修正裁剪框之前的参照数据
                CGFloat preDrawClipTop = self.clipAreaLayer.topEdge;
                CGFloat preDrawClipLeft = self.clipAreaLayer.leftEdge;
                
                //修正裁剪框
                CGFloat scale = [self drawClipArea];
                
                //设置imgView————不能单纯靠裁剪框的位置偏移量来定位，要考虑到缩放
                CGFloat imgViewX = 0;
                CGFloat imgViewY = 0;
                CGFloat imgWidth = CGRectGetWidth(self.imgView.frame)*scale;
                CGFloat imgHeight = CGRectGetHeight(self.imgView.frame)*scale;
                
                CGFloat offsetX = fabs(CGRectGetMinX(self.imgView.frame)-preDrawClipLeft);
                CGFloat offsetY = fabs(CGRectGetMinY(self.imgView.frame)-preDrawClipTop);
                imgViewX = self.clipAreaLayer.leftEdge-offsetX*scale;
                imgViewY = self.clipAreaLayer.topEdge-offsetY*scale;
                
                self.imgView.frame = CGRectMake(imgViewX, imgViewY, imgWidth, imgHeight);
            }];
            
            //记录每次修复后的位置
            self.preClipAreaFrame = CGRectMake(self.clipAreaLayer.leftEdge, self.clipAreaLayer.topEdge, self.clipAreaWidth, self.clipAreaHeight);
        }
        
        //滑动后，超出clipAreaLayer的图片设置为透明
        [self configShadowArea];
    }
}

　　//捏合手势

- (void)handlePinGes:(UIPinchGestureRecognizer *)pinGes
{
    CGPoint pinchCenter = [pinGes locationInView:self.imgView.superview];
    
    if (pinGes.state == UIGestureRecognizerStateBegan || pinGes.state == UIGestureRecognizerStateChanged) {
        
        [UIView animateWithDuration:0.5 animations:^{
            self.shaView.isSetShadow = NO;
        }];
        
        //CGAffineTransformScale方法90度旋转有问题
//        self.imgView.transform=CGAffineTransformScale(self.imgView.transform, pinGes.scale, pinGes.scale);
//        pinGes.scale = 1;
        
        CGFloat scale = pinGes.scale;
        CGFloat distanceX = self.imgView.frame.origin.x - pinchCenter.x;
        CGFloat distanceY = self.imgView.frame.origin.y - pinchCenter.y;
        CGFloat scaledDistanceX = distanceX * scale;
        CGFloat scaledDistanceY = distanceY * scale;
        CGRect newFrame = CGRectMake(self.imgView.frame.origin.x + scaledDistanceX - distanceX, self.imgView.frame.origin.y + scaledDistanceY - distanceY, self.imgView.frame.size.width * scale, self.imgView.frame.size.height * scale);
        self.imgView.frame = newFrame;
        pinGes.scale = 1;
    }
    
//    if (pinGes.state == UIGestureRecognizerStateEnded) {
    
        //不能过小
        if (CGRectGetMinY(self.imgView.frame)>self.clipAreaLayer.topEdge || CGRectGetMaxY(self.imgView.frame)<self.clipAreaLayer.bottomEdge || CGRectGetMinX(self.imgView.frame)>self.clipAreaLayer.leftEdge || CGRectGetMaxX(self.imgView.frame)<self.clipAreaLayer.rightEdge) {
            self.imgView.frame = CGRectMake(self.clipAreaLayer.leftEdge, self.clipAreaLayer.topEdge, self.clipAreaWidth, self.clipAreaHeight);
        }
        
        //不能过大
        CGFloat scaleNum = 10;
        CGFloat originalImgViewWidth = CGRectGetWidth(_originalImgViewFrame);
        if (CGRectGetWidth(self.imgView.frame)/originalImgViewWidth>scaleNum) {
            self.imgView.frame = _originalImgViewFrame;
            CGFloat distanceX = self.imgView.frame.origin.x - pinchCenter.x;
            CGFloat distanceY = self.imgView.frame.origin.y - pinchCenter.y;
            CGFloat scaledDistanceX = distanceX * scaleNum;
            CGFloat scaledDistanceY = distanceY * scaleNum;
            CGRect newFrame = CGRectMake(self.imgView.frame.origin.x + scaledDistanceX - distanceX, self.imgView.frame.origin.y + scaledDistanceY - distanceY, self.imgView.frame.size.width * scaleNum, self.imgView.frame.size.height * scaleNum);
            self.imgView.frame = newFrame;
            pinGes.scale = 1;
        }
    
//        NSLog(@"self.imgView.frame-----scale------%@", NSStringFromCGRect(self.imgView.frame));
//    }
    
    //缩放完后，需要点击一下图片才会执行该if语句————如何自动执行，待解决
    if (pinGes.state == UIGestureRecognizerStateEnded) {
        [self configShadowArea];
    }
//    self.resetBtn.hidden = NO;
}

//旋转

case 301://旋转90度——顺时针
        {
            _rorateNum++;
            
            [UIView animateWithDuration:0.5 animations:^{
                self.shaView.isSetShadow = NO;
            }];
            self.clipAreaLayer.hidden = YES;
            CGFloat dura = 1.0f;
            
            //旋转前：记录imgView与clipAreaLayer左边和底边的距离
            CGFloat preRoOffsetX = fabs(CGRectGetMaxY(self.imgView.frame)-self.clipAreaLayer.bottomEdge);
            CGFloat preRoOffsetY = fabs(CGRectGetMinX(self.imgView.frame)-self.clipAreaLayer.leftEdge);
            
            //旋转
            [UIView animateWithDuration:dura animations:^{
                CGAffineTransform trans = CGAffineTransformMakeRotation(_valueOffset);
                self.imgView.transform = trans;
            }];
            
            _valueOffset += M_PI_2;
            if (_rorateNum == kRotateNumMax) {
                _valueOffset = M_PI_2;
                _rorateNum = 0;
            }
            
            //切换坐标——imgView的frame自动修正
            [self changeXYWithRotation:_valueOffset];
            UIImage *agerImage = [self getRotatedImg];
            self.targetImg = agerImage;
            
            CGFloat temp = self.clipAreaWidth;
            self.clipAreaWidth = self.clipAreaHeight;
            self.clipAreaHeight = temp;
            CGFloat scale = [self drawClipArea];
//            [self setUpClipLayer:YES];
            
            //旋转后：调整imgView的位置——左变上，底变左
            self.imgView.frame = CGRectMake(self.clipAreaLayer.leftEdge-preRoOffsetX, self.clipAreaLayer.topEdge-preRoOffsetY, CGRectGetWidth(self.imgView.frame), CGRectGetHeight(self.imgView.frame));
            
            //缩放
            CABasicAnimation *baAniScale = [CABasicAnimation animationWithKeyPath:@"transform.scale"];
            baAniScale.beginTime = dura;
            baAniScale.duration = dura;
            baAniScale.fromValue = @1;
            baAniScale.toValue = @(scale);
            [self.imgView.layer addAnimation:baAniScale forKey:nil];
            
            //缩放后调整imgView的位置
            CGFloat imgViewX = 0;
            CGFloat imgViewY = 0;
            CGFloat imgWidth = CGRectGetWidth(self.imgView.frame)*scale;
            CGFloat imgHeight = CGRectGetHeight(self.imgView.frame)*scale;

            imgViewX = self.clipAreaLayer.leftEdge-preRoOffsetX*scale;
            imgViewY = self.clipAreaLayer.topEdge-preRoOffsetY*scale;
            
            //修正imgView位置
            self.imgView.frame = CGRectMake(imgViewX, imgViewY, imgWidth, imgHeight);
            
            //修正clipAreaLayer位置
            dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(1 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
                self.clipAreaLayer.hidden = NO;
            });
            
            [self configShadowArea];
        }

　　//裁剪

//要的是实际图片的大小
- (UIImage *)clipDownOriginalImg
{
    CGFloat imageScale = MIN(self.imgView.frame.size.width/self.targetImg.size.width, self.imgView.frame.size.height/self.targetImg.size.height);
    CGFloat clipX = (self.clipAreaLayer.leftEdge - self.imgView.frame.origin.x)/imageScale;
    CGFloat clipY = (self.clipAreaLayer.topEdge - self.imgView.frame.origin.y)/imageScale;
    CGFloat clipWidth = self.clipAreaWidth/imageScale;
    CGFloat clipHeight = self.clipAreaHeight/imageScale;
    CGRect clipImgRect = CGRectMake(clipX, clipY, clipWidth, clipHeight);
    
    CGImageRef sourceImageRef = [self.targetImg CGImage];
    CGImageRef newImageRef = CGImageCreateWithImageInRect(sourceImageRef, clipImgRect);
    UIImage *newImage = [UIImage imageWithCGImage:newImageRef];
    CGImageRelease(newImageRef);
    
    return newImage;
}

　　

二、滤镜——主要用到GPUImage框架

- (void)colorImg:(UIImage *)img
{
    [self.filter forceProcessingAtSize:img.size];
    self.staticPicture.image = img;
    
    if (self.outPutImgArr.count > 0) {
        [self.outPutImgArr removeAllObjects];
    }
    
    //图片太多，内存爆增，系统会自动杀掉app
//    [self.outPutImgArr addObject:img];
//    NSArray *paramArr = @[@"0.1", @"0.2", @"0.3", @"0.4", @"0.5", @"0.6", @"0.7", @"0.8", @"0.9", @"1.0"];
    NSArray *paramArr = @[@"0.3", @"0.5", @"0.7", @"0.9", @"1.0"];
    
    dispatch_queue_t queue = dispatch_get_global_queue(0, 0);
    dispatch_async(queue, ^{

        dispatch_apply(paramArr.count, queue, ^(size_t index) {

            NSString *paramStr = paramArr[index];
            [self.filter setIntensity: paramStr.floatValue];
            [self.staticPicture processImage];
            [self.outPutImgArr addObject:[self.filter imageFromCurrentlyProcessedOutput]];
            
//            NSLog(@"memoryUsage------%lld", [self memoryUsage]);

            dispatch_async(dispatch_get_main_queue(), ^{
                [self reloadData];
            });
        });
        
//        NSLog(@"-------Done1");
        
    });
    
//    NSLog(@"-------Done2");
    
}

　　

三、效果图

GitHub地址

猜你喜欢

转载自www.cnblogs.com/lybSkill/p/9856872.html
今日推荐
美国拟限制 AI 大模型出口中国和俄罗斯
苹果将与 OpenAI 达成协议，将 ChatGPT 应用于 iPhone
openKylin 社区生态委员会第六次会议圆满召开
阿里云正式发布通义千问 2.5
Python 3.13 发布首个 Beta：实验性自由线程模式和 JIT、改进交互式解释器
Stack Overflow 拿我的代码去训练 AI 大模型，还封了我的账号
Pop!_OS 的 COSMIC 桌面完成 App Store 上架工作
报告：Django 仍然是 74% 开发者的首选
《2024 年一季度互联网投融资运行情况》研究报告
15 年前上了“FFmpeg 耻辱柱”，今天他还得谢谢咱——腾讯QQPlayer一雪前耻？
TIOBE 5 月榜单：Fortran “复活”进入 Top 10
GCC 14.1 发布
周排行
curl的POST请求，封装方法
8.1.1. Integer Types
Java基础 Day05(个人复习整理)
Python - Django - 中间件 process_exception
小L的试卷
【Shell编程】 （函数）判断用户是否存在
python(css样式)
spring ant path 匹配原则 - 【笔记】
《JavaScript与JScript从入门到精通》(美)James.Jaworski.中译本.扫描版.pdf
Eclipse运行带参数的java程序
每日归档
更多
2024-05-12(0)
2024-05-11(38)
2024-05-10(38)
2024-05-09(35)
2024-05-08(42)
2024-05-07(14)
2024-05-06(40)
2024-05-05(0)
2024-05-04(7)
2024-05-03(19)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022