格林OLT HGU 配置
1、 GPON HGU
configure terminal
![GPON]
//配置 PON接口下ONU自动发现和自动认证
interface pon 0/1
ont-auto-find
ont-auto-auth
exit
//创建DBA模版
profile dba name 100M index 1 type 3 assured 10240 max 102400
//创建 vlan
![VLAN]
vlan 500
exit
//PON接口绑定业务vlan500
interface pon 0/1
switchport hybrid tagged vlan 500
exit
//上行接口绑定业务vlan500,端口模式为hybrid untag vlan
interface ethernet 0/15
switchport default vlan 500
switchport hybrid untagged vlan 500
exit
//进入ONU接口配置，Tcont，gemport
![ONTMNT]
ont 0/1/1
device type c40-427
tcont 1
gemport 1
bind profile dba name 100M
exit
service-port 1
mapping gemport 1
vlan 500
exit
//如果是SFU设备，也可以在Ethernet 1 端口进行vlan处理操作
interface ethernet 0/1
vlan mode trunk
trunk default vlan 46 //对vlan进行剥离操作
exit
2、修改 ONU-TYPE
格林EPON OLT onu type绑定配置步骤：
1）确认type名称，到具体onu下通过show onu-sn命令查看MODEL值，就是我们下一步要配置的type名称：
EPON(onu-0/7/1)#sho onu-sn
SN of onu 0/7/1 :
Vendor ID : EPON (HEX-45 50 4f 4e)
MODEL : 504R (HEX-35 30 34 52)
ONUID(MAC) : 00:0a:5a:01:01:01
HW :
SW : V1.2.7Mtest
2）全局配置type：
onu 504R 4 com enable classification enable isolation enable mac
enable multicast enable vlan enable vlan-cfg-mode ctc stp enable
3）取消onu的原来的类型绑定配置：
EPON(onu-0/7/1)#no onu-binding type
4）重启onu，类型自动绑定成功
EPON(onu-0/7/1)#sho running-config onumnt 0/7/1
![ONUMNT]
onu 0/7/1
onu-binding mac 00:0a:5a:01:01:01
onu-binding type 504r
5）创建ONU-type
onu-type 802w 4 vlan-cfg-mode ctc multicast enable classification enable com ena
ble vlan enable stp enable mac enable isolation enable
3、组播配置
![GARP]
multicast ip-address 224.1.1.11 vlan 500 interface pon 0/1
multicast ip-address 224.1.1.11 vlan 500 proxy-port ethernet 0/1 to ethernet 0
/16