1、华为MA5616 实际上就是一个MDU设备(也是窄带宽接入设备),有PON上行接口也可以是Ethernet上行接口;使用PON上行接口的话;需要跟OLT相连形成一个交换网络,该设备支持VDSL和ADSL模块(可插拔);
以下是MA5616 VDSL配置指导:
VDSL属于DSL技术的一种,也叫超高速数字用户线路,下行速率可以使对称或非对称
速率这块:比ADSL高出5–10倍
在一对铜缆双绞线上提供最高**19.2 Mbps的上行速率和最高55Mbps的下行速率(**也就是我们通常说的带宽),能同时提供话音和数据业务;
上下行对称速率可达到10Mbps
VDSL2+技术可以提供最高100Mbps的下行速率
操作步骤:
2、配置系统模式所支持的协议
[sysmode]
<sysmode>
switch adsl mode to rfc2662 vdsl mode to tr129
protocol support h248
#
3、配置VDSL线路模版
[global-config]
<global-config>
vdsl line-profile quickadd 3 transmode 1 bitswap 2 2 adapt 2 2 snr 60 0 300 60 0 300 power-management 2 2 255 30 255 3 9 name VDSL LINE PROFILE 2
vdsl channel-profile quickadd 3 path-mode both interleaved-delay 8 2 inp 4 2
rate 128 100000 128 100000 100000 100000 rate-threshold 0 0 0 0 name VDSL
CHANNEL PROFILE 3
vdsl line-template quickadd 3 line 3 channel1 3 100 100 name VDSL LINE TEMPLATE 3
#
4、添加板卡操作
[device-config]
<device-config>
board add 0/1 VDL
board add 0/2 ADL
port port-index 0/0/0 port-type GE-PORT(以太网上行口)
port port-index 0/0/1 port-type GPON-PORT(PON上行口)
#
5、vlan配置并绑定到上行端口上
[vlan-config]
<vlan-config>
vlan 100 smart
vlan 200 smart
port vlan 100 0/0 0
port vlan 100 0/0 1
port vlan 200 0/0 0
port vlan 200 0/0 1
#
6、配置以太网上行端口为native-vlan
[eth]
<eth-0/0>
interface eth 0/0
native-vlan 0 vlan 100
#
7、 配置业务虚端口service-port
[bbs-config]
<bbs-config>
service-port 0 vlan 100 vdsl mode ptm 0/2/22 multi-service user-vlan 100
#
8、配置vlan接口的IP地址,可用于带内管理
[vlanif]
<vlanif100>
interface vlanif100
ip address 192.168.88.88 255.255.255.0
#
9、配置带外管理接口
<meth0>
interface meth0
ip address 10.11.104.2 255.255.255.0
#
整个MA5616配置详细文档见:》》》MA5616配置指南