CentOS 多线路由配置

 1 #!/bin/sh
 2 ip route flush table 10
 3 ip route add default via 10.191.0.1 dev em1 src 10.191.0.100 table 10 prio 50
 4 ip rule add from 10.191.0.100 table 10
 5 ip route flush table 20
 6 ip route add default via 10.191.10.1 dev em2 src 10.191.10.100 table 20 prio 50
 7 ip rule add from 10.191.10.100 table 20
 8 
 9 
10 route add -net 10.0.0.0/8 gw 10.191.208.1

注意：以上配置只需要设置10.191.0.100的网关，其他网关不用设置

将上面的脚本放在/etc/sysconfig/static-route.sh，并在/etc/rc.loacl设置开机启动